MINISTARSTVO GOSPODARSTVA
2341
Na temelju članka 7. stavka 3. Pravilnika o sigurnosti strojeva (»Narodne novine«, br. 28/2011), te na temelju dostavljenog popisa hrvatskih norma u području sigurnosti strojeva od Hrvatskog zavoda za norme, ministar gospodarstva objavljuje
POPIS
HRVATSKIH NORMA U PODRUČJU SIGURNOSTI STROJEVA
Oznaka hrvatske norme |
Naslov (hrvatski) |
Oznaka europske norme |
Naslov (engleski) |
|
1. |
HRN EN 81-3:2008 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – 3. dio: Električna i hidraulična maloteretna dizala (EN 81-3:2000+A1:2008) |
EN 81-3:2000+A1:2008 |
Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts (EN 81-3:2000+A1:2008) |
2. |
HRN EN 81-3:2008/Ispr.1:2010 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – 3. dio: Električna i hidraulična maloteretna dizala (EN 81-3:2000+A1:2008/AC:2009) |
EN 81-3:2000+A1:2008/AC:2009 |
Safety rules for the construction and installation of lifts – Part 3: Electric and hydraulic service lifts (EN 81-3:2000+A1:2008/AC:2009) |
3. |
HRN EN 81-31:2011 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – Dizala samo za prijevoz tereta – 31. dio: Dizala u koja je moguć pristup (EN 81-31:2010) |
EN 81-31:2010 |
Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 31: Accessible goods only lifts (EN 81-31:2010) |
4. |
HRN EN 81-40:2008 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – Posebna dizala za transport osoba i tereta – 40. dio: Stubišne i nagibne podizne platforme za prijevoz osoba sa posebnim potrebama (EN 81-40:2008) |
EN 81-40:2008 |
Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility (EN 81-40:2008) |
5. |
HRN EN 81-41:2011 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – Posebna dizala za prijevoz osoba i tereta – 41. dio: Vertikalne podizne platforme namijenjene osobama sa smanjenom pokretljivošću (EN 81-41:2010) |
EN 81-41:2010 |
Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 41: Vertical lifting platforms intended for use by persons with impaired mobility (EN 81-41:2010) |
6. |
HRN EN 81-43:2009 |
Sigurnosna pravila za konstrukciju i ugradnju dizala – Posebna dizala za transport osoba i tereta – 43. dio: Dizala za granike (EN 81-43:2009) |
EN 81-43:2009 |
Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: Lifts for cranes (EN 81-43:2009) |
7. |
HRN EN 115-1:2010 |
Sigurnost pokretnih stuba i pokretnih traka – 1. dio: Konstrukcija i ugradnja (EN 115-1:2008+A1:2010) |
EN 115-1:2008+A1:2010 |
Safety of escalators and moving walks – Part 1: Construction and installation (EN 115-1:2008+A1:2010) |
8. |
HRN EN 201:2010 |
Strojevi za plastiku i gumu – Strojevi za injekcijsko ubrizgavanje – Sigurnosni zahtjevi (EN 201:2009) |
EN 201:2009 |
Plastics and rubber machines – Injection moulding machines – Safety requirements (EN 201:2009) |
9. |
HRN EN 267:2012 |
Automatski pretlačni plamenici za kapljevita goriva (EN 267:2009+A1:2011) |
EN 267:2009+A1:2011 |
Automatic forced draught burners for liquid fuels (EN 267:2009+A1:2011) |
10. |
HRN EN 280:2013 |
Pokretne podizne radne platforme – Projektni proračuni – Kriteriji stabilnosti – Konstrukcija – Sigurnost – Ispitivanja i pokusi (EN 280:2013) |
EN 280:2013 |
Mobile elevating work platforms – Design calculations – Stability criteria – Construction – Safety – Examinations and tests (EN 280:2013) |
11. |
HRN EN 289:2008 |
Strojevi za gumu i plastiku – Preše – Sigurnosni zahtjevi (EN 289:2004+A1:2008) |
EN 289:2004+A1:2008 |
Plastics and rubber machines – Presses – Safety requirements (EN 289:2004+A1:2008) |
12. |
HRN EN 303-5:2012 |
Toplovodni kotlovi – 5. dio: Kotlovi na kruto gorivo, ručno i automatski loženi, nazivne toplinske snage do 500 kW – Nazivlje, zahtjevi, ispitivanje i označivanje (EN 303-5:2012) |
EN 303-5:2012 |
Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking (EN 303-5:2012) |
13. |
HRN EN 349:2008 |
Sigurnost strojeva – Najmanji razmaci za sprječavanje zgnječenja (uguravanja) dijelova ljudskog tijela (EN 349:1993+A1:2008) |
EN 349:1993+A1:2008 |
Safety of machinery – Minimum gaps to avoid crushing of parts of the human body (EN 349:1993+A1:2008) |
14. |
HRN EN 378-2:2012 |
Rashladni sustavi i dizalice topline – Zahtjevi s obzirom na sigurnost i okoliš – 2. dio: Projektiranje, izvedba, ispitivanje, označivanje i dokumentacija (EN 378-2:2008+A2:2012) |
EN 378-2:2008+A2:2012 |
Refrigerating systems and heat pumps – Safety and environmental requirements – Part 2: Design, construction, testing, marking and documentation (EN 378-2:2008+A2:2012) |
15. |
HRN EN 415-1:2010 |
Sigurnost strojeva za pakiranje – 1. dio: Nazivlje i podjela strojeva za pakiranje i pripadajuće opreme (EN 415-1:2000+A1:2009) |
EN 415-1:2000+A1:2009 |
Packaging machines safety – Part 1: Terminology and classification of packaging machines and associated equipment (EN 415-1:2000+A1:2009) |
16. |
HRN EN 415-3:2010 |
Sigurnost strojeva za pakiranje – 3. dio: Strojevi za oblikovanje, punjenje i brtvljenje (EN 415-3:1999+A1:2009) |
EN 415-3:1999+A1:2009 |
Safety of packaging machines – Part 3: Form, fill and seal machines (EN 415-3:1999+A1:2009) |
17. |
HRN EN 415-5:2010 |
Sigurnost strojeva za pakiranje – 5. dio: Strojevi za umotavanje (EN 415-5:2006+A1:2009) |
EN 415-5:2006+A1:2009 |
Safety of packaging machines – Part 5: Wrapping machines (EN 415-5:2006+A1:2009) |
18. |
HRN EN 415-6:2013 |
Sigurnost strojeva za pakiranje – 6. dio: Strojevi za umotavanje paleta (EN 415-6:2013) |
EN 415-6:2013 |
Safety of packaging machines – Part 6: Pallet wrapping machines (EN 415-6:2013) |
19. |
HRN EN 415-7:2008 |
Sigurnost strojeva za pakiranje – 7. dio: Strojevi za skupno i sekundarno pakiranje (EN 415-7:2006+A1:2008) |
EN 415-7:2006+A1:2008 |
Safety of packaging machines – Part 7: Group and secondary packaging machines (EN 415-7:2006+A1:2008) |
20. |
HRN EN 415-8:2008 |
Sigurnost strojeva za pakiranje – 8. dio: Strojevi za pritezanje vrpcama (EN 415-8:2008) |
EN 415-8:2008 |
Safety of packaging machines – Part 8: Strapping machines (EN 415-8:2008) |
21. |
HRN EN 415-9:2010 |
Sigurnost strojeva za pakiranje – 9. dio: Metode mjerenja buke strojeva za pakiranje, linija za pakiranje i pripadajuće opreme 2. i 3. stupnja točnosti (EN 415-9:2009) |
EN 415-9:2009 |
Safety of packaging machines – Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 (EN 415-9:2009) |
22. |
HRN EN 415-10:2014 |
Sigurnost strojeva za pakiranje – 10. dio: Opći zahtjevi (EN 415-10:2014) |
EN 415-10:2014 |
Safety of packaging machines – Part 10: General Requirements (EN 415-10:2014) |
23. |
HRN EN 422:2010 |
Strojevi za plastiku i gumu – Sigurnost – Strojevi za puhanje u kalupe namijenjeni za proizvodnju šupljih artikala – Zahtjevi za oblikovanje i konstrukciju (EN 422:2009) |
EN 422:2009 |
Plastics and rubber machines – Blow moulding machines – Safety requirements (EN 422:2009) |
24. |
HRN EN 453:2010 |
Strojevi za preradu hrane – Miješalice za tijesto – Sigurnosni i higijenski zahtjevi (EN 453:2000+A1:2009) |
EN 453:2000+A1:2009 |
Food processing machinery – Dough mixers – Safety and hygiene requirements (EN 453:2000+A1:2009) |
25. |
HRN EN 454:2010 |
Strojevi za preradu hrane – Planetarne miješalice – Sigurnosni i higijenski zahtjevi (EN 454:2000+A1:2009) |
EN 454:2000+A1:2009 |
Food processing machinery – Planetary mixers – Safety and hygiene requirements (EN 454:2000+A1:2009) |
26. |
HRN EN 474-1:2014 |
Strojevi za zemljane radove – Sigurnost – 1. dio: Opći zahtjevi (EN 474-1:2006+A4:2013) |
EN 474-1:2006+A4:2013 |
Earth-moving machinery – Safety – Part 1: General requirements (EN 474-1:2006+A4:2013) |
27. |
HRN EN 474-1:2014/Ispr.1:2014 |
Strojevi za zemljane radove – Sigurnost – 1. dio: Opći zahtjevi (EN 474-1:2006+A4:2013/AC:2014) |
EN 474-1:2006+A4:2013/AC:2014 |
Earth-moving machinery – Safety – Part 1: General requirements (EN 474-1:2006+A4:2013/AC:2014) |
28. |
HRN EN 474-2:2009 |
Strojevi za zemljane radove – Sigurnost – 2. dio: Zahtjevi za traktorske dozere (EN 474-2:2006+A1:2008) |
EN 474-2:2006+A1:2008 |
Earth-moving machinery – Safety – Part 2: Requirements for tractor-dozers (EN 474-2:2006+A1:2008) |
29. |
HRN EN 474-3:2009 |
Strojevi za zemljane radove – Sigurnost – 3. dio: Zahtjevi za utovarivače (EN 474-3:2006+A1:2009) |
EN 474-3:2006+A1:2009 |
Earth-moving machinery – Safety – Part 3: Requirements for loaders (EN 474-3:2006+A1:2009) |
30. |
HRN EN 474-4:2012 |
Strojevi za zemljane radove – Sigurnost – 4. dio: Zahtjevi za bagere utovarivače (EN 474-4:2006+A2:2012) |
EN 474-4:2006+A2:2012 |
Earth-moving machinery – Safety – Part 4: Requirements for backhoe loaders (EN 474-4:2006+A2:2012) |
31. |
HRN EN 474-5:2013 |
Strojevi za zemljane radove – Sigurnost – 5. dio: Zahtjevi za hidraulične bagere (EN 474-5:2006+A3:2013) |
EN 474-5:2006+A3:2013 |
Earth-moving machinery – Safety – Part 5: Requirements for hydraulic excavators (EN 474-5:2006+A3:2013) |
32. |
HRN EN 474-6:2009 |
Strojevi za zemljane radove – Sigurnost – 6. dio: Zahtjevi za kamione kipere (EN 474-6:2006+A1:2009) |
EN 474-6:2006+A1:2009 |
Earth-moving machinery – Safety – Part 6: Requirements for dumpers (EN 474-6:2006+A1:2009) |
33. |
HRN EN 474-7:2009 |
Strojevi za zemljane radove – Sigurnost – 7. dio: Zahtjevi za strugače (EN 474-7:2006+A1:2009) |
EN 474-7:2006+A1:2009 |
Earth-moving machinery – Safety – Part 7: Requirements for scrapers (EN 474-7:2006+A1:2009) |
34. |
HRN EN 474-8:2009 |
Strojevi za zemljane radove – Sigurnost – 8. dio: Zahtjevi za ralice (EN 474-8:2006+A1:2009) |
EN 474-8:2006+A1:2009 |
Earth-moving machinery – Safety – Part 8: Requirements for graders (EN 474-8:2006+A1:2009) |
35. |
HRN EN 474-9:2009 |
Strojevi za zemljane radove – Sigurnost – 9. dio: Zahtjevi za polagače cijevi (EN 474-9:2006+A1:2009) |
EN 474-9:2006+A1:2009 |
Earth-moving machinery – Safety – Part 9: Requirements for pipelayers (EN 474-9:2006+A1:2009) |
36. |
HRN EN 474-10:2009 |
Strojevi za zemljane radove – Sigurnost – 10. dio: Zahtjevi za rovokopače (EN 474-10:2006+A1:2009) |
EN 474-10:2006+A1:2009 |
Earth-moving machinery – Safety – Part 10: Requirements for trenchers (EN 474-10:2006+A1:2009) |
37. |
HRN EN 474-11:2009 |
Strojevi za zemljane radove – Sigurnost – 11. dio: Zahtjevi za strojeve za zbijanje zemlje i otpada na odlagalištima (EN 474-11:2006+A1:2008) |
EN 474-11:2006+A1:2008 |
Earth-moving machinery – Safety – Part 11: Requirements for earth and landfill compactors (EN 474-11:2006+A1:2008) |
38. |
HRN EN 474-12:2009 |
Strojevi za zemljane radove – Sigurnost – 12. dio: Zahtjevi za kabelske bagere (EN 474-12:2006+A1:2008) |
EN 474-12:2006+A1:2008 |
Earth-moving machinery – Safety – Part 12: Requirements for cable excavators (EN 474-12:2006+A1:2008) |
39. |
HRN EN 500-1:2010 |
Pokretni strojevi za cestogradnju – Sigurnost – 1. dio: Opći zahtjevi (EN 500-1:2006+A1:2009) |
EN 500-1:2006+A1:2009 |
Mobile road construction machinery – Safety – Part 1: Common requirements (EN 500-1:2006+A1:2009) |
40. |
HRN EN 500-2:2009 |
Pokretni strojevi za cestogradnju – Sigurnost – 2. dio: Posebni zahtjevi za glodalice za ceste (EN 500-2:2006+A1:2008) |
EN 500-2:2006+A1:2008 |
Mobile road construction machinery – Safety – Part 2: Specific requirements for road-milling machines (EN 500-2:2006+A1:2008) |
41. |
HRN EN 500-3:2009 |
Pokretni strojevi za cestogradnju – Sigurnost – 3. dio: Posebni zahtjevi za strojeve za stabiliziranje tla i strojeve za reciklažu (EN 500-3:2006+A1:2008) |
EN 500-3:2006+A1:2008 |
Mobile road construction machinery – Safety – Part 3: Specific requirements for soil-stabilising machines and recycling machines (EN 500-3:2006+A1:2008) |
42. |
HRN EN 500-4:2011 |
Pokretni strojevi za cestogradnju – Sigurnost – 4. dio: Posebni zahtjevi za strojeve za sabijanje (EN 500-4:2011) |
EN 500-4:2011 |
Mobile road construction machinery – Safety – Part 4: Specific requirements for compaction machines (EN 500-4:2011) |
43. |
HRN EN 500-6:2009 |
Pokretni strojevi za cestogradnju – Sigurnost – 6. dio: Posebni zahtjevi za postavljače završnog sloja asfalta (EN 500-6:2006+A1:2008) |
EN 500-6:2006+A1:2008 |
Mobile road construction machinery – Safety – Part 6: Specific requirements for paver-finishers (EN 500-6:2006+A1:2008) |
44. |
HRN EN 528:2009 |
Oprema regalnih uređaja na tračnicama – Sigurnosni zahtjevi (EN 528:2008) |
EN 528:2008 |
Rail dependent storage and retrieval equipment – Safety requirements (EN 528:2008) |
45. |
HRN EN 547-1:2010 |
Sigurnost strojeva – Mjerenja ljudskog tijela – 1. dio: Načela određivanja dimenzija potrebnih za pristupne otvore u stroj cijelim tijelom (EN 547-1:1996+A1:2008) |
EN 547-1:1996+A1:2008 |
Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery (EN 547-1:1996+A1:2008) |
46. |
HRN EN 547-2:2010 |
Sigurnost strojeva – Mjerenja ljudskog tijela – 2. dio: Načela određivanja dimenzija potrebnih za pristupne otvore (EN 547-2:1996+A1:2008) |
EN 547-2:1996+A1:2008 |
Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings (EN 547-2:1996+A1:2008) |
47. |
HRN EN 547-3:2010 |
Sigurnost strojeva – Mjerenja ljudskog tijela – 3. dio: Antropometrijski podaci (EN 547-3:1996+A1:2008) |
EN 547-3:1996+A1:2008 |
Safety of machinery – Human body measurements – Part 3: Anthropometric data (EN 547-3:1996+A1:2008) |
48. |
HRN EN 574:2008 |
Sigurnost strojeva – Dvoručni upravljački uređaji – Funkcionalni aspekti – Načela za projektiranje (EN 574:1996+A1:2008) |
EN 574:1996+A1:2008 |
Safety of machinery – Two-hand control devices – Functional aspects – Principles for design (EN 574:1996+A1:2008) |
49. |
HRN EN 609-1:2010 |
Poljoprivredna i šumarska mehanizacija – Sigurnost cjepača – 1. dio: Klinasti cjepači (EN 609-1:1999+A2:2009) |
EN 609-1:1999+A2:2009 |
Agricultural and forestry machinery – Safety of log splitters – Part 1: Wedge splitters (EN 609-1:1999+A2:2009) |
50. |
HRN EN 609-2:2010 |
Poljoprivredna i šumarska mehanizacija – Sigurnost cjepača – 2. dio: Vijčani cjepači (EN 609-2:1999+A1:2009) |
EN 609-2:1999+A1:2009 |
Agricultural and forestry machinery – Safety of log splitters – Part 2: Screw splitters (EN 609-2:1999+A1:2009) |
51. |
HRN EN 614-1:2010 |
Sigurnost strojeva – Načela ergonomskog oblikovanja – 1. dio: Nazivlje i opća načela (EN 614-1:2006+A1:2009) |
EN 614-1:2006+A1:2009 |
Safety of machinery – Ergonomic design principles – Part 1: Terminology and general principles (EN 614-1:2006+A1:2009) |
52. |
HRN EN 614-2:2010 |
Sigurnost strojeva – Načela ergonomskog oblikovanja – 2. dio: Međusobni utjecaj oblikovanja strojeva i radnih zadataka (EN 614-2:2000+A1:2008) |
EN 614-2:2000+A1:2008 |
Safety of machinery – Ergonomic design principles – Part 2: Interactions between the design of machinery and work tasks (EN 614-2:2000+A1:2008) |
53. |
HRN EN 617:2010 |
Prenosila i sustavi neprekidne dobave – Sigurnost i EMC zahtjevi na opremu za skladištenje sipkog materijala u silosima, bunkerima, posudama i lijevcima (EN 617:2001+A1:2010) |
EN 617:2001+A1:2010 |
Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers (EN 617:2001+A1:2010) |
54. |
HRN EN 618:2010 |
Prenosila i sustavi neprekidne dobave – Sigurnosni i EMC zahtjevi na opremu mehaničke dobave sipkog materijala osim nepokretnih trakastih konvejera (EN 618:2002+A1:2010) |
EN 618:2002+A1:2010 |
Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors (EN 618:2002+A1:2010) |
55. |
HRN EN 619:2012 |
Prenosila i sustavi neprekidne dobave – Sigurnosni i EMC zahtjevi na opremu mehaničke dobave komadnog tereta (EN 619:2002+A1:2010) |
EN 619:2002+A1:2010 |
Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads (EN 619:2002+A1:2010) |
56. |
HRN EN 620:2010 |
Prenosila i sustavi neprekidne dobave – Sigurnost i EMS zahtjevi na nepokretne trakaste konvejere za sipki materijal (EN 620:2002+A1:2010) |
EN 620:2002+A1:2010 |
Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials (EN 620:2002+A1:2010) |
57. |
HRN EN 626-1:2008 |
Sigurnost strojeva – Smanjenje opasnosti za zdravlje od opasnih tvari koje ispuštaju strojevi – 1. dio: Načela i specifikacije za proizvođače strojeva (EN 626-1:1994+A1:2008) |
EN 626-1:1994+A1:2008 |
Safety of machinery – Reduction of risks to health from hazardous substances emitted by machinery – Part 1: Principles and specifications for machinery manufacturers (EN 626-1:1994+A1:2008) |
58. |
HRN EN 626-2:2008 |
Sigurnost strojeva – Smanjenje opasnosti za zdravlje od opasnih tvari koje ispuštaju strojevi – 2. dio: Metodologija pri postavljanju postupka verifikacije (EN 626-2:1996+A1:2008) |
EN 626-2:1996+A1:2008 |
Safety of machinery – Reduction of risk to health from hazardous substances emitted by machinery – Part 2: Methodology leading to verification procedures (EN 626-2:1996+A1:2008) |
59. |
HRN EN 676:2008 |
Automatski plinski plamenici s ventilatorima (EN 676:2003+A2:2008+AC:2008) |
EN 676:2003+A2:2008 |
Automatic forced draught burners for gaseous fuels (EN 676:2003+A2:2008+AC:2008) |
60. |
HRN EN 690:2014 |
Poljoprivredna mehanizacija -– Razbacivači gnojiva -– Sigurnost (EN 690:2013) |
EN 690:2013 |
Agricultural machinery – Manure spreaders – Safety (EN 690:2013) |
61. |
HRN EN 692:2009 |
Alatni strojevi – Mehaničke preše – Sigurnost (EN 692:2005+A1:2009) |
EN 692:2005+A1:2009 |
Machine tools – Mechanical presses – Safety (EN 692:2005+A1:2009) |
62. |
HRN EN 693:2012 |
Alatni strojevi – Sigurnost – Hidraulični tijesci (preše) (EN 693:2001+A2:2011) |
EN 693:2001+A2:2011 |
Machine tools – Safety – Hydraulic presses (EN 693:2001+A2:2011) |
63. |
HRN EN 703:2010 |
Poljoprivredna mehanizacija – Strojevi za punjenje, miješanje i/ili izuzimanje i raspodjelu silaže – Sigurnost (EN 703:2004+A1:2009) |
EN 703:2004+A1:2009 |
Agricultural machinery – Silage loading, mixing and/or chopping and distributing machines – Safety (EN 703:2004+A1:2009) |
64. |
HRN EN 706:2010 |
Poljoprivredna mehanizacija – Strojevi za rez mladica vinove loze – Sigurnost (EN 706:1996+A1:2009) |
EN 706:1996+A1:2009 |
Agricultural machinery – Vine shoot tipping machines – Safety (EN 706:1996+A1:2009) |
65. |
HRN EN 707:2010 |
Poljoprivredna mehanizacija – Spremnici za gnojnicu – Sigurnost (EN 707:1999+A1:2009) |
EN 707:1999+A1:2009 |
Agricultural machinery – Slurry tankers – Safety (EN 707:1999+A1:2009) |
66. |
HRN EN 709:2010 |
Poljoprivredna i šumarska mehanizacija – Jednoosovinski traktori s priključenom rovilicom, motorne kopačice (motokultivatori) – Sigurnost (EN 709:1997+A4:2009) |
EN 709:1997+A4:2009 |
Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety (EN 709:1997+A4:2009) |
67. |
HRN EN 709:2010/Ispr.1:2013 |
Poljoprivredna i šumarska mehanizacija – Jednoosovinski traktori s priključenom rovilicom, motorne kopačice (motokultivatori) – Sigurnost (EN 709:1997+A4:2009/AC:2012) |
EN 709:1997+A4:2009/AC:2012 |
Agricultural and forestry machinery – Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) – Safety (EN 709:1997+A4:2009/AC:2012) |
68. |
HRN EN 710:2011 |
Sigurnosni zahtjevi za strojeve i postrojenja za lijevanje u kalupe, proizvodnju ljevačkih jezgri i njihovu prateću opremu (EN 710:1997+A1:2010) |
EN 710:1997+A1:2010 |
Safety requirements for foundry moulding and coremaking machinery and plant associated equipment (EN 710:1997+A1:2010) |
69. |
HRN EN 710:2011/Ispr.1:2013 |
Sigurnosni zahtjevi za strojeve i postrojenja za lijevanje u kalupe, proizvodnju ljevačkih jezgri i njihovu prateću opremu (EN 710:1997+A1:2010/AC:2012) |
EN 710:1997+A1:2010/AC:2012 |
Safety requirements for foundry moulding and coremaking machinery and plant associated equipment (EN 710:1997+A1:2010/AC:2012) |
70. |
HRN EN 741:2010 |
Prenosila i sustavi neprekidne dobave – Sigurnosni zahtjevi za sustave i komponente pneumatske dobave sipkog materijala (EN 741:2000+A1:2010) |
EN 741:2000+A1:2010 |
Continuous handling equipment and systems – Safety requirements for systems and their components for pneumatic handling of bulk materials (EN 741:2000+A1:2010) |
71. |
HRN EN 746-1:2009 |
Oprema za toplinske postupke u industriji – 1. dio: Opći sigurnosni zahtjevi za opremu za toplinske postupke (EN 746-1:1997+A1:2009) |
EN 746-1:1997+A1:2009 |
Industrial thermoprocessing equipment – Part 1: Common safety requirements for industrial thermoprocessing equipment (EN 746-1:1997+A1:2009) |
72. |
HRN EN 746-2:2011 |
Oprema za toplinske postupke u industriji – 2. dio: Sigurnosni zahtjevi za sustave za izgaranje i dovod goriva (EN 746-2:2010) |
EN 746-2:2010 |
Industrial thermoprocessing equipment – Part 2: Safety requirements for combustion and fuel handling systems (EN 746-2:2010) |
73. |
HRN EN 746-3:2009 |
Oprema za toplinske postupke u industriji – 3. dio: Sigurnosni zahtjevi za proizvodnju i upotrebu atmosferskih plinova (EN 746-3:1997+A1:2009) |
EN 746-3:1997+A1:2009 |
Industrial thermoprocessing equipment – Part 3: Safety requirements for the generation and use of atmosphere gases (EN 746-3:1997+A1:2009) |
74. |
HRN EN 786:2010 |
Oprema za vrtove i parkove – Elektromotorni čistači za travu i rubnjake travnjaka – Sigurnost (EN 786:1996+A2:2009) |
EN 786:1996+A2:2009 |
Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers – Mechanical safety (EN 786:1996+A2:2009) |
75. |
HRN EN 791:2009 |
Oprema za bušenje – Sigurnost (EN 791:1995+A1:2009) |
EN 791:1995+A1:2009 |
Drill rigs – Safety (EN 791:1995+A1:2009) |
76. |
HRN EN 792-13:2008 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 13. dio: Alati (»pištolji«) za spajanje zabijanjem (EN 792-13:2000+A1:2008) |
EN 792-13:2000+A1:2008 |
Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (EN 792-13:2000+A1:2008) |
77. |
HRN EN 809:2010 |
Pumpe i pumpne jedinice za kapljevine – Opći sigurnosni zahtjevi (EN 809:1998+A1:2009+AC:2010) |
EN 809:1998+A1:2009 |
Pumps and pump units for liquids – Common safety requirements (EN 809:1998+A1:2009+AC:2010) |
78. |
HRN EN 815:2009 |
Sigurnost bušilica bez štitnika za tunele i bušilica za stijene – Sigurnosni zahtjevi (EN 815:1996+A2:2008) |
EN 815:1996+A2:2008 |
Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock – Safety requirements (EN 815:1996+A2:2008) |
79. |
HRN EN 818-1:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 1. dio: Opći uvjeti prihvaćanja (EN 818-1:1996+A1:2008) |
EN 818-1:1996+A1:2008 |
Short link chain for lifting purposes – Safety – Part 1: General conditions of acceptance (EN 818-1:1996+A1:2008) |
80. |
HRN EN 818-2:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 2. dio: Srednje tolerirani lanci lanaca za nošenje tereta – Razred 8 (EN 818-2:1996+A1:2008) |
EN 818-2:1996+A1:2008 |
Short link chain for lifting purposes – Safety – Part 2: Medium tolerance chain for chain slings – Grade 8 (EN 818-2:1996+A1:2008) |
81. |
HRN EN 818-3:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 3. dio: Srednje tolerirani lanci za nošenje tereta – Razred 4 (EN 818-3:1999+A1:2008) |
EN 818-3:1999+A1:2008 |
Short link chain for lifting purposes – Safety – Part 3: Medium tolerance chain for chain slings – Grade 4 (EN 818-3:1999+A1:2008) |
82. |
HRN EN 818-4:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 4. dio: Lanci za nošenje tereta – Razred 8 (EN 818-4:1996+A1:2008) |
EN 818-4:1996+A1:2008 |
Short link chain for lifting purposes – Safety – Part 4: Chain slings – Grade 8 (EN 818-4:1996+A1:2008) |
83. |
HRN EN 818-5:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 5. dio: Lanci za nošenje tereta – Razred 4 (EN 818-5:1999+A1:2008) |
EN 818-5:1999+A1:2008 |
Short link chain for lifting purposes – Safety – Part 5: Chain slings – Grade 4 (EN 818-5:1999+A1:2008) |
84. |
HRN EN 818-6:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 6. dio: Lanci za nošenje tereta – Odredbe proizvođača kao informacija o uporabi i održavanju (EN 818-6:2000+A1:2008) |
EN 818-6:2000+A1:2008 |
Short link chain for lifting purposes – Safety – Part 6: Chain slings – Specification for information for use and maintenance to be provided by the manufacturer (EN 818-6:2000+A1:2008) |
85. |
HRN EN 818-7:2008 |
Lanci kratkih karika za dizanje – Sigurnost – 7. dio: Fino tolerirani lanci za dizalice, razred T (izvedba T, DAT i DT) (EN 818-7:2002+A1:2008) |
EN 818-7:2002+A1:2008 |
Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, grade T (types T, DAT and DT) (EN 818-7:2002+A1:2008) |
86. |
HRN EN 842:2010 |
Sigurnost strojeva – Vizualni signali opasnosti – Opći zahtjevi, oblikovanja i ispitivanje (EN 842:1996+A1:2008) |
EN 842:1996+A1:2008 |
Safety of machinery – Visual danger signals – General requirements, design and testing (EN 842:1996+A1:2008) |
87. |
HRN EN 848-1:2013 |
Sigurnost strojeva za obradu drva – Jednostrani strojevi za oblikovanje kalupa rotirajućim alatom – 1. dio: Jednovreteni strojevi za vertikalno oblikovanje kalupa (EN 848-1:2007+A2:2012) |
EN 848-1:2007+A2:2012 |
Safety of woodworking machines – One side moulding machines with rotating tool – Part 1: Single spindle vertical moulding machines (EN 848-1:2007+A2:2012) |
88. |
HRN EN 848-2:2013 |
Sigurnost strojeva za obradu drva – Jednostrani strojevi za oblikovanje kalupa rotirajućim alatom – 2. dio: Jednovreteni strojevi vođeni ručno ili s ugrađenim vođenjem po krivulji (EN 848-2:2007+A2:2012) |
EN 848-2:2007+A2:2012 |
Safety of woodworking machines – One side moulding machines with rotating tool – Part 2: Single spindle hand fed/integrated fed routing machines (EN 848-2:2007+A2:2012) |
89. |
HRN EN 848-3:2013 |
Sigurnost strojeva za obradu drva – Jednostrani strojevi za oblikovanje kalupa rotirajućim alatom – 3. dio: Numeričko upravljani strojevi (NC) za bušenje i vođenje po krivulji (EN 848-3:2012) |
EN 848-3:2012 |
Safety of woodworking machines – One side moulding machines with rotating tools – Part 3: Numerically controlled (NC) boring and routing machines (EN 848-3:2012) |
90. |
HRN EN 859:2013 |
Sigurnost strojeva za obradu drva – Ručno vođeni strojevi za blanjanje površine (EN 859:2007+A2:2012) |
EN 859:2007+A2:2012 |
Safety of woodworking machines – Hand fed surface planing machines (EN 859:2007+A2:2012) |
91. |
HRN EN 860:2013 |
Sigurnost strojeva za obradu drva – Strojevi za jednostrano blanjanje (EN 860:2007+A2:2012) |
EN 860:2007+A2:2012 |
Safety of woodworking machines – One side thickness planing machines (EN 860:2007+A2:2012) |
92. |
HRN EN 861:2013 |
Sigurnost strojeva za obradu drva – Strojevi za blanjanje površina i blanjanje na debljinu (EN 861:2007+A2:2012) |
EN 861:2007+A2:2012 |
Safety of woodworking machines – Surface planing and thicknessing machines (EN 861:2007+A2:2012) |
93. |
HRN EN 869:2009 |
Sigurnost strojeva – Sigurnosni zahtjevi za jedinice za metalni tlačni lijev (EN 869:2006+A1:2009) |
EN 869:2006+A1:2009 |
Safety of machinery – Safety requirements for pressure metal diecasting units (EN 869:2006+A1:2009) |
94. |
HRN EN 894-1:2010 |
Sigurnost strojeva – Ergonomski zahtjevi za oblikovanje zaslona i upravljačkih sklopova – 1. dio: Opća načela za međudjelovanje čovjeka i zaslona te upravljačkih sklopova (EN 894-1:1997+A1:2008) |
EN 894-1:1997+A1:2008 |
Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators (EN 894-1:1997+A1:2008) |
95. |
HRN EN 894-2:2010 |
Sigurnost strojeva – Ergonomski zahtjevi za oblikovanje zaslona i upravljačkih sklopova – 2. dio: Zasloni (EN 894-2:1997+A1:2008) |
EN 894-2:1997+A1:2008 |
Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays (EN 894-2:1997+A1:2008) |
96. |
HRN EN 894-3:2010 |
Sigurnost strojeva – Ergonomski zahtjevi za oblikovanje zaslona i upravljačkih sklopova – 3. dio: Upravljački sklopovi (EN 894-3:2000+A1:2008) |
EN 894-3:2000+A1:2008 |
Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators (EN 894-3:2000+A1:2008) |
97. |
HRN EN 894-4:2010 |
Sigurnost strojeva – Ergonomski zahtjevi za dizajniranje zaslona i upravljačkih sklopova – 4. dio: Smještaj i uređenje zaslona i upravljačkih sklopova (EN 894-4:2010) |
EN 894-4:2010 |
Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 4: Location and arrangement of displays and control actuators (EN 894-4:2010) |
98. |
HRN EN 908:2010 |
Poljoprivredna i šumarska mehanizacija – Strojevi za navodnjavanje – Sigurnost (EN 908:1999+A1:2009) |
EN 908:1999+A1:2009 |
Agricultural and forestry machinery – Reel machines for irrigation – Safety (EN 908:1999+A1:2009) |
99. |
HRN EN 909:2010 |
Poljoprivredna i šumarska mehanizacija – Strojevi za navodnjavanje sa središnjim rasprskivačem i samohodnim bočnim rasprskivačima – Sigurnost (EN 909:1998+A1:2009) |
EN 909:1998+A1:2009 |
Agricultural and forestry machinery – Centre pivot and moving lateral types irrigation machines – Safety (EN 909:1998+A1:2009) |
100. |
HRN EN 930:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Strojevi za grubu obradu, ribanje, glađenje i porubljivanje – Sigurnosni zahtjevi (EN 930:1997+A2:2009) |
EN 930:1997+A2:2009 |
Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements (EN 930:1997+A2:2009) |
101. |
HRN EN 931:2010 |
Strojevi za proizvodnju obuće – Postolarski strojevi – Sigurnosni zahtjevi (EN 931:1997+A2:2009) |
EN 931:1997+A2:2009 |
Footwear manufacturing machines – Lasting machines – Safety requirements (EN 931:1997+A2:2009) |
102. |
HRN EN 940:2012 |
Sigurnost strojeva za obradu drva – Kombinirani strojevi za obradu drva (EN 940:2009+A1:2012) |
EN 940:2009+A1:2012 |
Safety of woodworking machines – Combined woodworking machines (EN 940:2009+A1:2012) |
103. |
HRN EN 953:2009 |
Sigurnost strojeva – Zaštite – Opći zahtjevi za projektiranje i izvedbu pomičnih i nepomičnih zaštita (EN 953:1997+A1:2009) |
EN 953:1997+A1:2009 |
Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guards (EN 953:1997+A1:2009) |
104. |
HRN EN 972:2013 |
Strojevi za štavljenje kože – Strojevi s izmjenjivim valjcima – Sigurnosni zahtjevi (EN 972:1998+A1:2010+AC:2011) |
EN 972:1998+A1:2010 |
Tannery machines – Reciprocating roller machines – Safety requirements (EN 972:1998+A1:2010+AC:2011) |
105. |
HRN EN 981:2010 |
Sigurnost strojeva – Sustav zvučnih i vizualnih signala opasnosti te obavijesnih signala (EN 981:1996+A1:2008) |
EN 981:1996+A1:2008 |
Safety of machinery – System of auditory and visual danger and information signals (EN 981:1996+A1:2008) |
106. |
HRN EN 996:2009 |
Oprema za bušenje rupa za zabijanje stupova – Sigurnosni zahtjevi (EN 996:1995+A3:2009) |
EN 996:1995+A3:2009 |
Piling equipment – Safety requirements (EN 996:1995+A3:2009) |
107. |
HRN EN 1005-1:2010 |
Sigurnost strojeva – Tjelesne osobine čovjeka – 1. dio: Nazivi i definicije (EN 1005-1:2001+A1:2008) |
EN 1005-1:2001+A1:2008 |
Safety of machinery – Human physical performance – Part 1: Terms and definitions (EN 1005-1:2001+A1:2008) |
108. |
HRN EN 1005-2:2010 |
Sigurnost strojeva – Tjelesne osobine čovjeka – 2. dio: Ručno rukovanje strojevima i dijelovima strojeva (EN 1005-2:2003+A1:2008) |
EN 1005-2:2003+A1:2008 |
Safety of machinery – Human physical performance – Part 2: Manual handling of machinery and component parts of machinery (EN 1005-2:2003+A1:2008) |
109. |
HRN EN 1005-3:2010 |
Sigurnost strojeva – Tjelesne osobine čovjeka – 3. dio: Preporučene granice opterećenja za rad sa strojevima (EN 1005-3:2002+A1:2008) |
EN 1005-3:2002+A1:2008 |
Safety of machinery – Human physical performance – Part 3: Recommended force limits for machinery operation (EN 1005-3:2002+A1:2008) |
110. |
HRN EN 1005-4:2010 |
Sigurnost strojeva – Tjelesne osobine čovjeka – 4. dio: Prosudba radnog položaja i kretanja čovjeka u odnosu prema stroju (EN 1005-4:2005+A1:2008) |
EN 1005-4:2005+A1:2008 |
Safety of machinery – Human physical performance – Part 4: Evaluation of working postures and movements in relation to machinery (EN 1005-4:2005+A1:2008) |
111. |
HRN EN 1010-1:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za tiskanje i konvertiranje papira – 1. dio: Opći zahtjevi (EN 1010-1:2004+A1:2010) |
EN 1010-1:2004+A1:2010 |
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements (EN 1010-1:2004+A1:2010) |
112. |
HRN EN 1010-2:2012 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za tiskanje i konvertiranje papira – 2. dio: Strojevi za tiskanje i premazivanje papira ukjučujući i strojeve za predtiještenje (EN 1010-2:2006+A1:2010) |
EN 1010-2:2006+A1:2010 |
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery (EN 1010-2:2006+A1:2010) |
113. |
HRN EN 1010-3:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za tiskanje i konvertiranje papira – 3. dio: Strojevi za rezanje (EN 1010-3:2002+A1:2009) |
EN 1010-3:2002+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 3: Cutting machines (EN 1010-3:2002+A1:2009) |
114. |
HRN EN 1010-4:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za tiskanje i konvertiranje papira – 4. dio: Strojevi za uvezivanje, konvertiranje i završnu obradu knjiga (EN 1010-4:2004+A1:2009) |
EN 1010-4:2004+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 4: Bookbinding, paper converting and finishing machines (EN 1010-4:2004+A1:2009) |
115. |
HRN EN 1012-1:2010 |
Kompresori i vakuumske pumpe – Sigurnosni zahtjevi – 1. dio: Zračni kompresori (EN 1012-1:2010) |
EN 1012-1:2010 |
Compressors and vacuum pumps – Safety requirements – Part 1: Air compressors (EN 1012-1:2010) |
116. |
HRN EN 1012-2:2009 |
Kompresori i vakuumske pumpe – Sigurnosni zahtjevi – 2. dio: Vakuumske pumpe (EN 1012-2:1996+A1:2009) |
EN 1012-2:1996+A1:2009 |
Compressors and vacuum pumps – Safety requirements – Part 2: Vacuum pumps (EN 1012-2:1996+A1:2009) |
117. |
HRN EN 1012-3:2013 |
Kompresori i vakuumske pumpe – Sigurnosni zahtjevi – 3. dio: Procesni kompresori (EN 1012-3:2013) |
EN 1012-3:2013 |
Compressors and vacuum pumps – Safety requirements – Part 3: Process compressors (EN 1012-3:2013) |
118. |
HRN EN 1028-1:2008 |
Vatrogasne pumpe – Centrifugalne vatrogasne pumpe s vakuum uređajem – 1. dio: Razredba – Opći i sigurnosni zahtjevi (EN 1028-1:2002+A1:2008) |
EN 1028-1:2002+A1:2008 |
Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 1: Classification – General and safety requirements (EN 1028-1:2002+A1:2008) |
119. |
HRN EN 1028-2:2008 |
Vatrogasne pumpe – Centrifugalne vatrogasne pumpe s vakuum uređajem – 2. dio: Provjeravanje općih i sigurnosnih zahtjeva (EN 1028-2:2002+A1:2008) |
EN 1028-2:2002+A1:2008 |
Fire-fighting pumps – Fire-fighting centrifugal pumps with primer – Part 2: Verification of general and safety requirements (EN 1028-2:2002+A1:2008) |
120. |
HRN EN 1032:2009 |
Mehaničke vibracije – Ispitivanja pokretnih strojeva radi određivanja vrijednosti vibracijske emisije (EN 1032:2003+A1:2008) |
EN 1032:2003+A1:2008 |
Mechanical vibration – Testing of mobile machinery in order to determine the vibration emission value (EN 1032:2003+A1:2008) |
121. |
HRN EN 1034-1:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 1. dio: Opći zahtjevi (EN 1034-1:2000+A1:2010) |
EN 1034-1:2000+A1:2010 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 1: Common requirements (EN 1034-1:2000+A1:2010) |
122. |
HRN EN 1034-2:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 2. dio: Valjci za namatanje (EN 1034-2:2005+A1:2009) |
EN 1034-2:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 2: Barking drums (EN 1034-2:2005+A1:2009) |
123. |
HRN EN 1034-3:2013 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 3. dio: Strojevi za namatanje, rezanje i pravljenje pregiba (EN 1034-3:2011) |
EN 1034-3:2011 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 3: Rereelers and winders (EN 1034-3:2011) |
124. |
HRN EN 1034-4:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 4. dio: Strojevi za pravljenje pulpe i njihove mogućnosti opterećenja (EN 1034-4:2005+A1:2009) |
EN 1034-4:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 4: Pulpers and their loading facilities (EN 1034-4:2005+A1:2009) |
125. |
HRN EN 1034-5:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 5. dio: Strojevi za izradu listova (EN 1034-5:2005+A1:2009) |
EN 1034-5:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 5: Sheeters (EN 1034-5:2005+A1:2009) |
126. |
HRN EN 1034-6:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 6. dio: Stroj za izglađivanje (tijesak) (EN 1034-6:2005+A1:2009) |
EN 1034-6:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 6: Calender (EN 1034-6:2005+A1:2009) |
127. |
HRN EN 1034-7:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 7. dio: Komore (EN 1034-7:2005+A1:2009) |
EN 1034-7:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 7: Chests (EN 1034-7:2005+A1:2009) |
128. |
HRN EN 1034-8:2013 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 8. dio: Pogoni za prećišćavanje (EN 1034-8:2012) |
EN 1034-8:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 8: Refining plants (EN 1034-8:2012) |
129. |
HRN EN 1034-13:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 13. dio: Strojevi za skidanje žica s koluta i jedinica (EN 1034-13:2005+A1:2009) |
EN 1034-13:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 13: Machines for de-wiring bales and units (EN 1034-13:2005+A1:2009) |
130. |
HRN EN 1034-14:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 14. dio: Namatalica (EN 1034-14:2005+A1:2009) |
EN 1034-14:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 14: Reel splitter (EN 1034-14:2005+A1:2009) |
131. |
HRN EN 1034-16:2013 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 16. dio: Strojevi za izradu papira i ploča (EN 1034-16:2012) |
EN 1034-16:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 16: Paper and board making machines (EN 1034-16:2012) |
132. |
HRN EN 1034-17:2012 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 17. dio: Strojevi za izradu pletiva (EN 1034-17:2012) |
EN 1034-17:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 17: Tissue making machines (EN 1034-17:2012) |
133. |
HRN EN 1034-21:2012 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 21. dio: Strojevi za premazivanje (EN 1034-21:2012) |
EN 1034-21:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 21: Coating machines (EN 1034-21:2012) |
134. |
HRN EN 1034-22:2010 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 22. dio: Usitnjivač drveta (EN 1034-22:2005+A1:2009) |
EN 1034-22:2005+A1:2009 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 22: Wood Grinders (EN 1034-22:2005+A1:2009) |
135. |
HRN EN 1034-26:2013 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 26. dio: Strojevi za pakiranje svitaka (EN 1034-26:2012) |
EN 1034-26:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 26: Roll packaging machines (EN 1034-26:2012) |
136. |
HRN EN 1034-27:2012 |
Sigurnost strojeva – Sigurnosni zahtjevi za projektiranje i konstrukciju strojeva za izradu i završnu obradu papira – 27. dio: Strojevi za rukovanje svitcima (EN 1034-27:2012) |
EN 1034-27:2012 |
Safety of machinery – Safety requirements for the design and construction of paper making and finishing machines – Part 27: Roll handling systems (EN 1034-27:2012) |
137. |
HRN EN 1037:2008 |
Sigurnost strojeva – Sprečavanje neočekivanog uključivanja (EN 1037:1995+A1:2008) |
EN 1037:1995+A1:2008 |
Safety of machinery – Prevention of unexpected start-up (EN 1037:1995+A1:2008) |
138. |
HRN EN 1093-1:2009 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari u zraku – 1. dio: Odabir metoda ispitivanja (EN 1093-1:2008) |
EN 1093-1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 1: Selection of test methods (EN 1093-1:2008) |
139. |
HRN EN 1093-2:2008 |
Sigurnost strojeva – Vrednovanje emisije opasnih tvari nošenih zrakom – 2. dio: Metoda ispitivanja tragovima plina za mjerenje brzine emisije određenog onečišćivača (EN 1093-2:2006+A1:2008) |
EN 1093-2:2006+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant (EN 1093-2:2006+A1:2008) |
140. |
HRN EN 1093-3:2008 |
Sigurnost strojeva – Vrednovanje emisije opasnih tvari nošenih zrakom – 3. dio: Metoda ispitivanja za mjerenje brzine emisije određenog onečišćivača (EN 1093-3:2006+A1:2008) |
EN 1093-3:2006+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 3: Test bench method for the measurement of the emission rate of a given pollutant (EN 1093-3:2006+A1:2008) |
141. |
HRN EN 1093-4:2008 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari u zraku – 4. dio: Učinkovitost odvajanja ispusnih sustava – Trejser metoda (EN 1093-4:1996+A1:2008) |
EN 1093-4:1996+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 4: Capture efficiency of an exhaust system – Tracer method (EN 1093-4:1996+A1:2008) |
142. |
HRN EN 1093-6:2008 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari u zraku – 6. dio: Učinkovitost odvajanja mase, nekanaliziranog ispusta (EN 1093-6:1998+A1:2008) |
EN 1093-6:1998+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 6: Separation efficiency by mass, unducted outlet (EN 1093-6:1998+A1:2008) |
143. |
HRN EN 1093-7:2008 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari u zraku – 7. dio: Učinkovitost odvajanja mase, kanaliziranog ispusta (EN 1093-7:1998+A1:2008) |
EN 1093-7:1998+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 7: Separation efficiency by mass, ducted outlet (EN 1093-7:1998+A1:2008) |
144. |
HRN EN 1093-8:2008 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari u zraku – 8. dio: Metoda određivanja pokazatelja koncentracije onečišćujuće tvari na ispitnom sklopu (EN 1093-8:1998+A1:2008) |
EN 1093-8:1998+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 8: Pollutant concentration parameter, test bench method (EN 1093-8:1998+A1:2008) |
145. |
HRN EN 1093-9:2008 |
Sigurnost strojeva – Određivanje emisije opasnih onečišćujućih tvari – 9. dio: Metoda određivanja pokazatelja koncentracije onečišćujuće tvari u ispitnoj prostoriji (EN 1093-9:1998+A1:2008) |
EN 1093-9:1998+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 9: Pollutant concentration parameter, room method (EN 1093-9:1998+A1:2008) |
146. |
HRN EN 1093-11:2008 |
Sigurnost strojeva – Ocjena ispuštanja opasnih tvari nošenih zrakom – 11. dio: Indeks dekontaminacije (čišćenja) (EN 1093-11:2001+A1:2008) |
EN 1093-11:2001+A1:2008 |
Safety of machinery – Evaluation of the emission of airborne hazardous substances – Part 11: Decontamination index (EN 1093-11:2001+A1:2008) |
147. |
HRN EN 1114-1:2012 |
Strojevi za gumu i plastiku – Ekstruderi i linije za ekstrudiranje – 1. dio: Sigurnosni zahtjevi za ekstrudere (EN 1114-1:2011) |
EN 1114-1:2011 |
Plastics and rubber machines – Extruders and extrusion lines – Part 1: Safety requirements for extruders (EN 1114-1:2011) |
148. |
HRN EN 1114-3:2008 |
Strojevi za gumu i plastiku – Ekstruderi i linije za ekstrudiranje – 3. dio: Sigurnosni zahtjevi za izvlačenje (EN 1114-3:2001+A1:2008) |
EN 1114-3:2001+A1:2008 |
Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs (EN 1114-3:2001+A1:2008) |
149. |
HRN EN 1127-1:2012 |
Eksplozivne atmosfere – Sprječavanje i zaštita od eksplozije – 1. dio: Osnovna načela i metodologija (EN 1127-1:2011) |
EN 1127-1:2011 |
Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology (EN 1127-1:2011) |
150. |
HRN EN 1127-2:2009 |
Eksplozivne atmosfere – Sprječavanje eksplozije i zaštita – 2. dio: Osnovna načela i metodologija za rudarstvo (EN 1127-2:2002+A1:2008) |
EN 1127-2:2002+A1:2008 |
Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining (EN 1127-2:2002+A1:2008) |
151. |
HRN EN 1175-1:2011 |
Sigurnost industrijskih kamiona – Električni zahtjevi – 1. dio: Opći zahtjevi za kamione pogonjene baterijama (EN 1175-1:1998+A1:2010) |
EN 1175-1:1998+A1:2010 |
Safety of industrial trucks – Electrical requirements – Part 1: General requirements for battery powered trucks (EN 1175-1:1998+A1:2010) |
152. |
HRN EN 1175-2:2011 |
Sigurnost industrijskih kamiona – Električni zahtjevi – 2. dio: Opći zahtjevi za kamione pogonjene motorima s unutrašnjim izgaranjem (EN 1175-2:1998+A1:2010) |
EN 1175-2:1998+A1:2010 |
Safety of industrial trucks – Electrical requirements – Part 2: General requirements of internal combustion engine powered trucks (EN 1175-2:1998+A1:2010) |
153. |
HRN EN 1175-3:2011 |
Sigurnost industrijskih kamiona – Električni zahtjevi – 3. dio: Posebni zahtjevi za električno pogonjeni prijenosni sustav za kamione pogonjene motorima s unutrašnjim izgaranjem (EN 1175-3:1998+A1:2010) |
EN 1175-3:1998+A1:2010 |
Safety of industrial trucks – Electrical requirements – Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks (EN 1175-3:1998+A1:2010) |
154. |
HRN EN 1218-1:2010 |
Sigurnost strojeva za obradu drva – Strojevi za izradu rukavaca – 1. dio: Strojevi za jednostranu izradu rukavaca s pomičnim stolom (EN 1218-1:1999+A1:2009) |
EN 1218-1:1999+A1:2009 |
Safety of woodworking machines – Tenoning machines – Part 1: Single end tenoning machines with sliding table (EN 1218-1:1999+A1:2009) |
155. |
HRN EN 1218-2:2010 |
Sigurnost strojeva za obradu drva – Strojevi za izradu rukavaca – 2. dio: Strojevi za dvostranu izradu rukavaca i/ili profiliranje pogonjeni lancem ili lancima (EN 1218-2:2004+A1:2009) |
EN 1218-2:2004+A1:2009 |
Safety of woodworking machines – Tenoning machines – Part 2: Double end tenoning and/or profiling machines fed by chain or chains (EN 1218-2:2004+A1:2009) |
156. |
HRN EN 1218-3:2010 |
Sigurnost strojeva za obradu drva – Strojevi za izradu rukavaca – 3. dio: Ručno pogonjeni strojevi za izradu rukavaca s pomičnim stolom za rezanje konstrukcijskog drva (EN 1218-3:2001+A1:2009) |
EN 1218-3:2001+A1:2009 |
Safety of woodworking machines – Tenoning machines – Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers (EN 1218-3:2001+A1:2009) |
157. |
HRN EN 1218-4:2010 |
Sigurnost strojeva za obradu drva – Strojevi za izradu rukavaca – 4. dio: Strojevi za savijanje bridova pogonjeni lancem (lancima) (EN 1218-4:2004+A2:2009) |
EN 1218-4:2004+A2:2009 |
Safety of woodworking machines – Tenoning machines – Part 4: Edge banding machines fed by chain(s) (EN 1218-4:2004+A2:2009) |
158. |
HRN EN 1218-5:2010 |
Sigurnost strojeva za obradu drva – Strojevi za izradu rukavaca – 5. dio: Strojevi za jednostrano profiliranje s fiksnim stolom i pogonskim valjcima ili pogonjeni lancem (EN 1218-5:2004+A1:2009) |
EN 1218-5:2004+A1:2009 |
Safety of woodworking machines – Tenoning machines – Part 5: One side profiling machines with fixed table and feed rollers or feed chain (EN 1218-5:2004+A1:2009) |
159. |
HRN EN 1247:2010 |
Strojevi za lijevanje – Sigurnosni zahtjevi za grabljenje, opremu za lijevanje, strojeve za centrifugalni lijev, strojeve za kontinuirano i polukontinuirano lijevanje (EN 1247:2004+A1:2010) |
EN 1247:2004+A1:2010 |
Foundry machinery – Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines (EN 1247:2004+A1:2010) |
160. |
HRN EN 1248:2009 |
Strojevi za lijevanje – Sigurnosni zahtjevi za opremu za abrazivno pjeskarenje (EN 1248:2001+A1:2009) |
EN 1248:2001+A1:2009 |
Foundry machinery – Safety requirements for abrasive blasting equipment (EN 1248:2001+A1:2009) |
161. |
HRN EN 1265:2009 |
Sigurnost strojeva – Pravilo za ispitivanje buke strojeva i opreme za ljevarstvo (EN 1265:1999+A1:2008) |
EN 1265:1999+A1:2008 |
Safety of machinery – Noise test code for foundry machines and equipment (EN 1265:1999+A1:2008) |
162. |
HRN EN 1299:2009 |
Mehaničke vibracije i udari – Vibracijska izolacija strojeva – Informacije o primjeni izolacije izvora (EN 1299:1997+A1:2008) |
EN 1299:1997+A1:2008 |
Mechanical vibration and shock – Vibration isolation of machines – Information for the application of source isolation (EN 1299:1997+A1:2008) |
163. |
HRN EN 1374:2010 |
Poljoprivredna mehanizacija – Nepomični istovarivači silosa za okrugle silose – Sigurnost (EN 1374:2000+A1:2010) |
EN 1374:2000+A1:2010 |
Agricultural machinery – Silos stationary unloaders for round silos – Safety (EN 1374:2000+A1:2010) |
164. |
HRN EN 1398:2009 |
Prilagodljive platforme – Sigurnosni zahtjevi (EN 1398:2009) |
EN 1398:2009 |
Dock levellers – Safety requirements (EN 1398:2009) |
165. |
HRN EN 1417:2008 |
Strojevi za gumu i plastiku – Dvovaljčana glodala – Sigurnosni zahtjevi (EN 1417:1996+A1:2008) |
EN 1417:1996+A1:2008 |
Plastics and rubber machines – Two roll mills – Safety requirements (EN 1417:1996+A1:2008) |
166. |
HRN EN 1417:2008/Ispr.1:2012 |
Strojevi za gumu i plastiku – Dvovaljčana glodala – Sigurnosni zahtjevi (EN 1417:1996+A1:2008/AC:2009) |
EN 1417:1996+A1:2008/AC:2009 |
Plastics and rubber machines – Two roll mills – Safety requirements (EN 1417:1996+A1:2008/AC:2009) |
167. |
HRN EN 1459:2012 |
Sigurnost industrijskih kamiona – Kamioni s vlastitim pogonom različitog dometa (EN 1459:1998+A3:2012) |
EN 1459:1998+A3:2012 |
Safety of industrial trucks – Self-propelled variable reach trucks (EN 1459:1998+A3:2012) |
168. |
HRN EN 1492-1:2009 |
Tekstilne priveznice – Sigurnost – 1. dio: Ravno tkane priveznice od umjetnih vlakana za opću uporabu (EN 1492-1:2000+A1:2008) |
EN 1492-1:2000+A1:2008 |
Textile slings – Safety – Part 1: Flat woven webbing slings made of man-made fibres for general purpose use (EN 1492-1:2000+A1:2008) |
169. |
HRN EN 1492-2:2009 |
Tekstilne priveznice – Sigurnost – 2. dio: Kružne priveznice od umjetnih vlakana za opću uporabu (EN 1492-2:2000+A1:2008) |
EN 1492-2:2000+A1:2008 |
Textile slings – Safety – Part 2: Roundslings made of man-made fibres for general purpose use (EN 1492-2:2000+A1:2008) |
170. |
HRN EN 1492-4:2009 |
Tekstilne priveznice – Sigurnost – 4. dio: Podizne priveznice opće namjene od prirodne i umjetne vlaknaste užadi (EN 1492-4:2004+A1:2008) |
EN 1492-4:2004+A1:2008 |
Textile slings – Safety – Part 4: Lifting slings for general service made from natural and man-made fibre ropes (EN 1492-4:2004+A1:2008) |
171. |
HRN EN 1493:2010 |
Dizala za vozila (EN 1493:2010) |
EN 1493:2010 |
Vehicle lifts (EN 1493:2010) |
172. |
HRN EN 1494:2009 |
Pokretne ili prenosive podne dizalice i pripadajuća podizna oprema (EN 1494:2000+A1:2008) |
EN 1494:2000+A1:2008 |
Mobile or movable jacks and associated lifting equipment (EN 1494:2000+A1:2008) |
173. |
HRN EN 1495:2009 |
Podizne platforme – Stupne radne platforme (EN 1495:1997+A2:2009) |
EN 1495:1997+A2:2009 |
Lifting platforms – Mast climbing work platforms (EN 1495:1997+A2:2009) |
174. |
HRN EN 1495:2009/Ispr.1:2012 |
Podizne platforme – Stupne radne platforme (EN 1495:1997+A2:2009/AC:2010) |
EN 1495:1997+A2:2009/AC:2010 |
Lifting platforms – Mast climbing work platforms (EN 1495:1997+A2:2009/AC:2010) |
175. |
HRN EN 1501-1:2011 |
Vozila za skupljanje otpada – Opći i sigurnosni zahtjevi – 1. dio: Vozila za skupljanje otpada sa stražnjim punjenjem (EN 1501-1:2011) |
EN 1501-1:2011 |
Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles (EN 1501-1:2011) |
176. |
HRN EN 1501-2:2010 |
Vozila za skupljanje otpada i pripadne naprave za podizanje – Opći i sigurnosni zahtjevi – 2. dio: Vozila za skupljanje otpada s bočnim punjenjem (EN 1501-2:2005+A1:2009) |
EN 1501-2:2005+A1:2009 |
Refuse collection vehicles and associated lifting devices – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles (EN 1501-2:2005+A1:2009) |
177. |
HRN EN 1501-3:2008 |
Vozila za skupljanje otpada i pripadne naprave za podizanje – Opći i sigurnosni zahtjevi – 3. dio: Vozila za skupljanje otpada s prednjim punjenjem (EN 1501-3:2008) |
EN 1501-3:2008 |
Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles (EN 1501-3:2008) |
178. |
HRN EN 1501-4:2008 |
Vozila za skupljanje otpada i pripadne naprave za podizanje – Opći i sigurnosni zahtjevi – 4. dio: Ispitivanja buke za vozila za skupljanje otpada (EN 1501-4:2007) |
EN 1501-4:2007 |
Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 4: Noise test code for refuse collection vehicles (EN 1501-4:2007) |
179. |
HRN EN 1501-5:2011 |
Vozila za skupljanje otpada – Opći i sigurnosni zahtjevi – 5. dio: Vozila za skupljanje otpada s podiznim uređajima (EN 1501-5:2011) |
EN 1501-5:2011 |
Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles (EN 1501-5:2011) |
180. |
HRN EN 1526:2008 |
Sigurnost industrijskih kamiona – Dodatni zahtjevi za automatske funkcije na kamionima (EN 1526:1997+A1:2008) |
EN 1526:1997+A1:2008 |
Safety of industrial trucks – Additional requirements for automated functions on trucks (EN 1526:1997+A1:2008) |
181. |
HRN EN 1539:2010 |
Sušnice i peći u kojima se oslobađaju zapaljive tvari – Sigurnosni zahtjevi (EN 1539:2009) |
EN 1539:2009 |
Dryers and ovens, in which flammable substances are released – Safety requirements (EN 1539:2009) |
182. |
HRN EN 1547:2009 |
Oprema za toplinske postupke u industriji – Pravilo za ispitivanje buke opreme za toplinske postupke uključujući pomoćnu opremu za rukovanje (EN 1547:2001+A1:2009) |
EN 1547:2001+A1:2009 |
Industrial thermoprocessing equipment – Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (EN 1547:2001+A1:2009) |
183. |
HRN EN 1550:2008 |
Sigurnost alatnih strojeva – Sigurnosni zahtjevi za oblikovanje i konstrukciju radnih steznih glava (EN 1550:1997+A1:2008) |
EN 1550:1997+A1:2008 |
Machine-tools safety – Safety requirements for the design and construction of work holding chucks (EN 1550:1997+A1:2008) |
184. |
HRN EN 1554:2013 |
Transportne trake – Ispitivanje trenja na bubnjevima (EN 1554:2012) |
EN 1554:2012 |
Conveyor belts – Drum friction testing (EN 1554:2012) |
185. |
HRN EN 1570-1:2012 |
Sigurnosni zahtjevi za podizne platforme – 1. dio: Podizne platforme za opsluživanje do dvije fiksne površine (EN 1570-1:2011) |
EN 1570-1:2011 |
Safety requirements for lifting tables – Part 1: Lifting tables serving up to two fixed landings (EN 1570-1:2011) |
186. |
HRN EN 1612-1:2008 |
Strojevi za gumu i plastiku – Strojevi za oblikovanje kalupljenjem – 1. dio: Sigurnosni zahtjevi za jedinice za mjerenje i miješanje (EN 1612-1:1997+A1:2008) |
EN 1612-1:1997+A1:2008 |
Plastics and rubber machines – Reaction moulding machines – Part 1: Safety requirements for metering and mixing units (EN 1612-1:1997+A1:2008) |
187. |
HRN EN 1672-2:2009 |
Strojevi za preradu hrane – Osnovni pojmovi – 2. dio: Higijenski zahtjevi (EN 1672-2:2005+A1:2009) |
EN 1672-2:2005+A1:2009 |
Food processing machinery – Basic concepts – Part 2: Hygiene requirements (EN 1672-2:2005+A1:2009) |
188. |
HRN EN 1673:2010 |
Strojevi za preradu hrane – Rotirajuće etažne peći – Sigurnosni i higijenski zahtjevi (EN 1673:2000+A1:2009) |
EN 1673:2000+A1:2009 |
Food processing machinery – Rotary rack ovens – Safety and hygiene requirements (EN 1673:2000+A1:2009) |
189. |
HRN EN 1674:2010 |
Strojevi za preradu hrane – Stroj za dijeljenje tijesta i peciva – Sigurnosni i higijenski zahtjevi (EN 1674:2000+A1:2009) |
EN 1674:2000+A1:2009 |
Food processing machinery – Dough and pastry brakes – Safety and hygiene requirements (EN 1674:2000+A1:2009) |
190. |
HRN EN 1677-1:2009 |
Dijelovi za priveznice – Sigurnost – 1. dio: Kovani čelični dijelovi, razred 8 (EN 1677-1:2000+A1:2008) |
EN 1677-1:2000+A1:2008 |
Components for slings – Safety – Part 1: Forged steel components, Grade 8 (EN 1677-1:2000+A1:2008) |
191. |
HRN EN 1677-2:2008 |
Dijelovi za priveznice – Sigurnost – 2. dio: Kovane čelične kuke sa zasunom za dizanje tereta – Klasa 8 (EN 1677-2:2000+A1:2008) |
EN 1677-2:2000+A1:2008 |
Components for slings – Safety – Part 2: Forged steel lifting hooks with latch – Grade 8 (EN 1677-2:2000+A1:2008) |
192. |
HRN EN 1677-3:2008 |
Dijelovi za priveznice – Sigurnost – 3. dio: Kovane čelične samozatvarajuće kuke – Klasa 8 (EN 1677-3:2001+A1:2008) |
EN 1677-3:2001+A1:2008 |
Components for slings – Safety – Part 3: Forged steel self-locking hooks – Grade 8 (EN 1677-3:2001+A1:2008) |
193. |
HRN EN 1677-4:2009 |
Dijelovi za priveznice – Sigurnost – 4. dio: Alke, razred 8 (EN 1677-4:2000+A1:2008) |
EN 1677-4:2000+A1:2008 |
Components for slings – Safety – Part 4: Links, Grade 8 (EN 1677-4:2000+A1:2008) |
194. |
HRN EN 1677-5:2009 |
Dijelovi za priveznice – Sigurnost – 5. dio: Kovane čelične kuke za dizanje sa sigurnosnim osiguračem – Razred 4 (EN 1677-5:2001+A1:2008) |
EN 1677-5:2001+A1:2008 |
Components for slings – Safety – Part 5: Forged steel lifting hooks with latch – Grade 4 (EN 1677-5:2001+A1:2008) |
195. |
HRN EN 1677-6:2009 |
Dijelovi za priveznice – Sigurnost – 6. dio: Alke – Razred 4 (EN 1677-6:2001+A1:2008) |
EN 1677-6:2001+A1:2008 |
Components for slings – Safety – Part 6: Links – Grade 4 (EN 1677-6:2001+A1:2008) |
196. |
HRN EN 1678:2010 |
Strojevi za preradu hrane – Strojevi za rezanje povrća – Sigurnosni i higijenski zahtjevi (EN 1678:1998+A1:2010) |
EN 1678:1998+A1:2010 |
Food processing machinery – Vegetable cutting machines – Safety and hygiene requirements (EN 1678:1998+A1:2010) |
197. |
HRN EN 1679-1:2013 |
Klipni motori s unutrašnjim izgaranjem – Sigurnost – 1. dio: Motori s ubrizgavanjem (EN 1679-1:1998+A1:2011) |
EN 1679-1:1998+A1:2011 |
Reciprocating internal combustion engines – Safety – Part 1: Compression ignition engines (EN 1679-1:1998+A1:2011) |
198. |
HRN EN 1710:2009 |
Oprema i komponente namijenjene uporabi u potencijalno eksplozivnim atmosferama podzemnih rudnika (EN 1710:2005+A1:2008) |
EN 1710:2005+A1:2008 |
Equipment and components intended for use in potentially explosive atmospheres in underground mines (EN 1710:2005+A1:2008) |
199. |
HRN EN 1710:2009/Ispr.1:2012 |
Oprema i komponente namijenjene uporabi u potencijalno eksplozivnim atmosferama podzemnih rudnika (EN 1710:2005+A1:2008/AC:2010) |
EN 1710:2005+A1:2008/AC:2010 |
Equipment and components intended for use in potentially explosive atmospheres in underground mines (EN 1710:2005+A1:2008/AC:2010) |
200. |
HRN EN 1755:2013 |
Sigurnost industrijskih kamiona – Rad u potencijalno eksplozivnoj atmosferi – Upotreba u zapaljivim plinovima, parama, magli i prašini (EN 1755:2000+A2:2013) |
EN 1755:2000+A2:2013 |
Safety of industrial trucks – Operation in potentially explosive atmospheres – Use in flammable gas, vapour, mist and dust (EN 1755:2000+A2:2013) |
201. |
HRN EN 1756-1:2008 |
Stražnja dizala – Platformna dizala za ugradnju na vozilima na kotačima – Zahtjevi za sigurnost – 1. dio: Stražnje teretno dizalo (EN 1756-1:2001+A1:2008) |
EN 1756-1:2001+A1:2008 |
Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods (EN 1756-1:2001+A1:2008) |
202. |
HRN EN 1756-2:2009 |
Stražnja dizala – Platformna dizala za ugradnju na vozilima na kotačima – Zahtjevi za sigurnost – 2. dio: Stražnje dizalo za putnike (EN 1756-2:2004+A1:2009) |
EN 1756-2:2004+A1:2009 |
Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 2: Tail lifts for passengers (EN 1756-2:2004+A1:2009) |
203. |
HRN EN 1777:2011 |
Hidraulične platforme (HP) za gašenje požara i spašavanje – Zahtjevi za sigurnost i ispitivanje (EN 1777:2010) |
EN 1777:2010 |
Hydraulic platforms (HPs) for fire fighting and rescue services – Safety requirements and testing (EN 1777:2010) |
204. |
HRN EN 1804-1:2010 |
Strojevi za podzemne rudnike – Sigurnosni zahtjevi za hidrauličnu samohodnu podgradu – 1. dio: Elementi podgrade i opći zahtjevi (EN 1804-1:2001+A1:2010) |
EN 1804-1:2001+A1:2010 |
Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 1: Support units and general requirements (EN 1804-1:2001+A1:2010) |
205. |
HRN EN 1804-2:2010 |
Strojevi za podzemne rudnike – Sigurnosni zahtjevi za hidrauličnu samohodnu podgradu – 2. dio: Stojke i pogonski cilindri (EN 1804-2:2001+A1:2010) |
EN 1804-2:2001+A1:2010 |
Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 2: Power set legs and rams (EN 1804-2:2001+A1:2010) |
206. |
HRN EN 1804-3:2010 |
Strojevi za podzemne rudnike – Sigurnosni zahtjevi za hidrauličnu samohodnu podgradu – 3. dio: Hidraulički kontrolni sistemi (EN 1804-3:2006+A1:2010) |
EN 1804-3:2006+A1:2010 |
Machines for underground mines – Safety requirements for hydraulic powered roof supports – Part 3: Hydraulic control systems (EN 1804-3:2006+A1:2010) |
207. |
HRN EN 1807-1:2013 |
Sigurnost strojeva za obradu drva – Tračne pile – 1. dio: Stolne tračne pile i tračne pile (EN 1807-1:2013) |
EN 1807-1:2013 |
Safety of woodworking machines – Band sawing machines – Part 1: Table band saws and band re-saws (EN 1807-1:2013) |
208. |
HRN EN 1807-2:2013 |
Sigurnost strojeva za obradu drva – Tračne pile – 2. dio: Tračne pile za trupce (EN 1807-2:2013) |
EN 1807-2:2013 |
Safety of woodworking machines – Band sawing machines – Part 2: Log sawing machines (EN 1807-2:2013) |
209. |
HRN EN 1808:2010 |
Zahtjevi za sigurnost viseće skele – Projektni proračuni, kriteriji stabilnosti, konstrukcija – Ispitivanja (EN 1808:1999+A1:2010) |
EN 1808:1999+A1:2010 |
Safety requirements on Suspended Access Equipment – Design calculations, stability criteria, construction – Tests (EN 1808:1999+A1:2010) |
210. |
HRN EN 1829-1:2010 |
Strojevi s visokotlačnim mlazom vode – Sigurnosni zahtjevi – 1. dio: Strojevi (EN 1829-1:2010) |
EN 1829-1:2010 |
High pressure water jet machines – Safety requirements – Part 1: Machines (EN 1829-1:2010) |
211. |
HRN EN 1829-2:2008 |
Strojevi s visokotlačnim mlazom vode – Sigurnosni zahtjevi – 2. dio: Crijeva i spojnice (EN 1829-2:2008) |
EN 1829-2:2008 |
High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors (EN 1829-2:2008) |
212. |
HRN EN 1829-2:2008/Ispr.1:2011 |
Strojevi s visokotlačnim mlazom vode – Sigurnosni zahtjevi – 2. dio: Crijeva i spojnice (EN 1829-2:2008/AC:2011) |
EN 1829-2:2008/AC:2011 |
High-pressure water jet machines – Safety requirements – Part 2: Hoses, hose lines and connectors (EN 1829-2:2008/AC:2011) |
213. |
HRN EN 1837:2010 |
Sigurna uporaba strojeva – Rasvjeta strojeva (EN 1837:1999+A1:2009) |
EN 1837:1999+A1:2009 |
Safety of machinery – Integral lighting of machines (EN 1837:1999+A1:2009) |
214. |
HRN EN 1845:2008 |
Strojevi za proizvodnju obuće – Strojevi za oblikovanje obuće (kalupi) – Sigurnosni zahtjevi (EN 1845:2007) |
EN 1845:2007 |
Footwear manufacturing machines – Footwear moulding machines – Safety requirements (EN 1845:2007) |
215. |
HRN EN 1846-2:2013 |
Vozila za gašenje požara i spašavanje – 2. dio: Opći zahtjevi – Sigurnost i svojstva (EN 1846-2:2009+A1:2013) |
EN 1846-2:2009+A1:2013 |
Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance (EN 1846-2:2009+A1:2013) |
216. |
HRN EN 1846-3:2013 |
Vozila za gašenje požara i spašavanje – 3. dio: Trajno ugrađena oprema – Sigurnost i svojstva (EN 1846-3:2013) |
EN 1846-3:2013 |
Firefighting and rescue service vehicles – Part 3: Permanently installed equipment – Safety and performance (EN 1846-3:2013) |
217. |
HRN EN 1853:2010 |
Poljoprivredna mehanizacija – Prikolice sa zakretnim samoistovarnim sandukom – Sigurnost (EN 1853:1999+A1:2009) |
EN 1853:1999+A1:2009 |
Agricultural machinery – Trailers with tipping body – Safety (EN 1853:1999+A1:2009) |
218. |
HRN EN 1870-3:2009 |
Sigurnost strojeva za obradu drva – Kružne pile – 3. dio: Pile za poprečno prepiljivanje i dvonamjenske pile za poprečno rezanje/stolovi kružnih pila (EN 1870-3:2001+A1:2009) |
EN 1870-3:2001+A1:2009 |
Safety of woodworking machines – Circular sawing machines – Part 3: Down cutting cross-cut saw and dual purpose down cutting cross-cut saws/circular saw benches (EN 1870-3:2001+A1:2009) |
219. |
HRN EN 1870-4:2012 |
Sigurnost strojeva za obradu drva – Kružne pile – 4. dio: Višelisne pile s ručnim ulaganjem i/ili prihvaćanjem gotovog obratka (EN 1870-4:2012) |
EN 1870-4:2012 |
Safety of woodworking machines – Circular sawing machines – Part 4: Multiblade rip sawing machines with manual loading and/or unloading (EN 1870-4:2012) |
220. |
HRN EN 1870-5:2013 |
Sigurnost strojeva za obradu drva – Kružne pile – 5. dio: Kružne pile sa stolovima/potezno-poprečne pile (EN 1870-5:2002+A2:2012) |
EN 1870-5:2002+A2:2012 |
Safety of woodworking machines – Circular sawing machines – Part 5: Circular sawbenches/up-cutting cross-cut sawing machines (EN 1870-5:2002+A2:2012) |
221. |
HRN EN 1870-6:2010 |
Sigurnost strojeva za obradu drveta – Kružne pile – 6. dio: Kružne pile za ogrjevno drvo i dvonamjenske kružne pile za ogrjevno drvo/stolne kružne pile s ručnim ulaganjem i/ili odlaganjem (EN 1870-6:2002+A1:2009) |
EN 1870-6:2002+A1:2009 |
Safety of woodworking machines – Circular sawing machines – Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading (EN 1870-6:2002+A1:2009) |
222. |
HRN EN 1870-7:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 7. dio: Kružne pile za trupce s jednom pilom, s ugrađenim posmakom stola i ručnim ulaganjem i/ili odlaganjem (EN 1870-7:2012) |
EN 1870-7:2012 |
Safety of woodworking machines – Circular sawing machines – Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading (EN 1870-7:2012) |
223. |
HRN EN 1870-8:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 8. dio: Kružne pile za krajčenje i paranje s pogonom kružne pile i ručnim ulaganjem i/ili odlaganjem (EN 1870-8:2012) |
EN 1870-8:2012 |
Safety of woodworking machines – Circular sawing machines – Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading (EN 1870-8:2012) |
224. |
HRN EN 1870-9:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 9. dio: Kružne pile s dvije pile za poprečno rezanje s ugrađenim posmakom i ručnim ulaganjem i/ili odlaganjem (EN 1870-9:2012) |
EN 1870-9:2012 |
Safety of woodworking machines – Circular sawing machines – Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading (EN 1870-9:2012) |
225. |
HRN EN 1870-10:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 10. dio: Podstolne automatske i poluautomatske klatne pile s jednom pilom (EN 1870-10:2013) |
EN 1870-10:2013 |
Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines (EN 1870-10:2013) |
226. |
HRN EN 1870-11:2014 |
Sigurnost strojeva za obradu drveta – Kružne pile – 11. dio: Poluautomatske i automatske horizontalne kružne pile za poprečno rezanje s jednom pilom (radijalni nosač pile) (EN 1870-11:2013) |
EN 1870-11:2013 |
Safety of woodworking machines – Circular sawing machines – Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) (EN 1870-11:2013) |
227. |
HRN EN 1870-12:2014 |
Sigurnost strojeva za obradu drveta – Kružne pile – 12. dio: Klatne kružne pile za poprečno rezanje (EN 1870-12:2013) |
EN 1870-12:2013 |
Safety of woodworking machines – Circular sawing machines – Part 12: Pendulum cross-cut sawing machines (EN 1870-12:2013) |
228. |
HRN EN 1870-13:2012 |
Sigurnost strojeva za obradu drveta – Kružne pile – 13. dio: Horizontalne kružne pile za ploče s pritisnim uređajem (EN 1870-13:2007+A2:2012) |
EN 1870-13:2007+A2:2012 |
Safety of woodworking machines – Circular sawing machines – Part 13: Horizontal beam panel sawing machines (EN 1870-13:2007+A2:2012) |
229. |
HRN EN 1870-14:2012 |
Sigurnost strojeva za obradu drveta – Kružne pile – 14. dio: Vertikalne kružne pile za ploče (EN 1870-14:2007+A2:2012) |
EN 1870-14:2007+A2:2012 |
Safety of woodworking machines – Circular sawing machines – Part 14: Vertical panel sawing machines (EN 1870-14:2007+A2:2012) |
230. |
HRN EN 1870-15:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 15. dio: Višelistne kružne pile s ugrađenim posmakom obratka i ručnim ulaganjem i/ili odlaganjem (EN 1870-15:2012) |
EN 1870-15:2012 |
Safety of woodworking machines – Circular sawing machines – Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading (EN 1870-15:2012) |
231. |
HRN EN 1870-16:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 16. dio: Pile za V-rezanje (EN 1870-16:2012) |
EN 1870-16:2012 |
Safety of woodworking machines – Circular sawing machines – Part 16: Double mitre sawing machines for V cutting (EN 1870-16:2012) |
232. |
HRN EN 1870-17:2009 |
Sigurnost strojeva za obradu drveta – Kružne pile – 17. dio: Ručne horizontalne kružne pile s jednim listom (ručni radijalni nosač pile) (EN 1870-17:2007+A2:2009) |
EN 1870-17:2007+A2:2009 |
Safety of woodworking machines – Circular sawing machines – Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) (EN 1870-17:2007+A2:2009) |
233. |
HRN EN 1870-18:2013 |
Sigurnost strojeva za obradu drva – Kružne pile – 18. dio: Dimenzije pila (EN 1870-18:2013) |
EN 1870-18:2013 |
Safety of woodworking machines – Circular sawing machines – Part 18: Dimension saws (EN 1870-18:2013) |
234. |
HRN EN 1870-19:2013 |
Sigurnost strojeva za obradu drveta – Kružne pile – 19. dio: Stolne kružne pile (s kliznim stolom i bez njega) i s ugrađenom bočnom pilom (EN 1870-19:2013) |
EN 1870-19:2013 |
Safety of woodworking machines – Circular sawing machines – Part 19: Circular saw benches (with and without sliding table) and building site saws (EN 1870-19:2013) |
235. |
HRN EN 1889-1:2011 |
Strojevi za podzemne rudnike – Pokretni strojevi u podzemnim rudnicima – Sigurnost – 1. dio: Vozila na gumenim kotačima (EN 1889-1:2011) |
EN 1889-1:2011 |
Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles (EN 1889-1:2011) |
236. |
HRN EN 1889-2:2010 |
Strojevi za podzemne rudnike – Pokretni strojevi u podzemnim rudnicima – Sigurnost – 2. dio: Željezničke lokomotive (EN 1889-2:2003+A1:2009) |
EN 1889-2:2003+A1:2009 |
Machines for underground mines – Mobile machines working underground – Safety – Part 2: Rail locomotives (EN 1889-2:2003+A1:2009) |
237. |
HRN EN 1915-1:2013 |
Oprema za zemaljsku podršku zrakoplovu – Opći zahtjevi – 1. dio: Osnovni sigurnosni zahtjevi (EN 1915-1:2013) |
EN 1915-1:2013 |
Aircraft ground support equipment – General requirements – Part 1: Basic safety requirements (EN 1915-1:2013) |
238. |
HRN EN 1915-2:2010 |
Oprema za zemaljsku podršku zrakoplovu – Opći zahtjevi – 2. dio: Zahtjevi za stabilnost i čvrstoću, metode izračunavanja i ispitivanja (EN 1915-2:2001+A1:2009) |
EN 1915-2:2001+A1:2009 |
Aircraft ground support equipment – General requirements – Part 2: Stability and strength requirements, calculations and test methods (EN 1915-2:2001+A1:2009) |
239. |
HRN EN 1915-3:2010 |
Oprema za zemaljsku podršku zrakoplovu – Opći zahtjevi – 3. dio: Metode smanjivanja i mjerenja vibracija (EN 1915-3:2004+A1:2009) |
EN 1915-3:2004+A1:2009 |
Aircraft ground support equipment – General requirements – Part 3: Vibration measurement methods and reduction (EN 1915-3:2004+A1:2009) |
240. |
HRN EN 1915-4:2010 |
Oprema za zemaljsku podršku zrakoplovu – Opći zahtjevi – 4. dio: Metode smanjivanja i mjerenja buke (EN 1915-4:2004+A1:2009) |
EN 1915-4:2004+A1:2009 |
Aircraft ground support equipment – General requirements – Part 4: Noise measurement methods and reduction (EN 1915-4:2004+A1:2009) |
241. |
HRN EN 1953:2013 |
Oprema za raspršivanje i naštrcavanje pri prevlačenju materijala – Sigurnosni zahtjevi (EN 1953:2013) |
EN 1953:2013 |
Atomising and spraying equipment for coating materials – Safety requirements (EN 1953:2013) |
242. |
HRN EN 1974:2010 |
Strojevi za preradu hrane – Strojevi za rezanje – Sigurnosni i higijenski zahtjevi (EN 1974:1998+A1:2009) |
EN 1974:1998+A1:2009 |
Food processing machinery – Slicing machines – Safety and hygiene requirements (EN 1974:1998+A1:2009) |
243. |
HRN EN ISO 2151:2009 |
Akustika – Ispitno pravilo za buku kompresora i vakuumskih pumpi – Inženjerska metoda (2. razred) (ISO 2151:2004; EN ISO 2151:2008) |
EN ISO 2151:2008 |
Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (grade 2) (ISO 2151:2004; EN ISO 2151:2008) |
244. |
HRN EN ISO 2860:2008 |
Strojevi za zemljane radove – Dimenzije minimalnog pristupa (ISO 2860:1992; EN ISO 2860:2008) |
EN ISO 2860:2008 |
Earth-moving machinery – Minimum access dimensions (ISO 2860:1992; EN ISO 2860:2008) |
245. |
HRN EN ISO 2867:2011 |
Strojevi za zemljane radove – Sustav pristupa (ISO 2867:2011; EN ISO 2867:2011) |
EN ISO 2867:2011 |
Earth-moving machinery – Access systems (ISO 2867:2011; EN ISO 2867:2011) |
246. |
HRN EN ISO 3164:2013 |
Strojevi za zemljane radove – Laboratorijsko vrednovanje zaštitnih konstrukcija – Specifikacija graničnog volumena (s)kretanja (ISO 3164:2013; EN ISO 3164:2013) |
EN ISO 3164:2013 |
Earth-moving machinery – Laboratory evaluations of protective structures – Specifications for deflection-limiting volume (ISO 3164:2013; EN ISO 3164:2013) |
247. |
HRN EN ISO 3266:2011 |
Kovani čelični okasti vijci razreda 4 za opće namjene podizanja (ISO 3266:2010; EN ISO 3266:2010) |
EN ISO 3266:2010 |
Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010; EN ISO 3266:2010) |
248. |
HRN EN ISO 3411:2008 |
Strojevi za zemljane radove – Fizičke mjere rukovatelja i najmanji prostor za rukovatelja (ISO 3411:2007; EN ISO 3411:2007) |
EN ISO 3411:2007 |
Earth-moving machinery – Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007; EN ISO 3411:2007) |
249. |
HRN EN ISO 3449:2009 |
Strojevi za zemljane radove – Zaštitne konstrukcije za zaštitu od padajućih predmeta – Laboratorijska ispitivanja i zahtjevi za izvedbu (ISO 3449:2005; EN ISO 3449:2008) |
EN ISO 3449:2008 |
Earth-moving machinery – Falling-object protective structures – Laboratory tests and performance requirements (ISO 3449:2005; EN ISO 3449:2008) |
250. |
HRN EN ISO 3450:2011 |
Strojevi za zemljane radove – Strojevi na kotačima ili na gumenim gusjenicama velike brzine – Zahtjevi izvedbe i postupci ispitivanja za kočne sustave (ISO 3450:2011; EN ISO 3450:2011) |
EN ISO 3450:2011 |
Earth-moving machinery – Wheeled or high-speed rubber-tracked machines – Performance requirements and test procedures for brake systems (ISO 3450:2011; EN ISO 3450:2011) |
251. |
HRN EN ISO 3457:2009 |
Strojevi za zemljane radove – Štitnici – Definicije i zahtjevi (ISO 3457:2003; EN ISO 3457:2008) |
EN ISO 3457:2008 |
Earth-moving machinery – Guards – Definitions and requirements (ISO 3457:2003; EN ISO 3457:2008) |
252. |
HRN EN ISO 3471:2008 |
Strojevi za zemljane radove – Zaštitne konstrukcije pri prevrtanju – Laboratorijska ispitivanja i zahtjevi za izvedbu (ISO 3471:2008; EN ISO 3471:2008) |
EN ISO 3471:2008 |
Earth-moving machinery – Roll-over protective structures – Laboratory tests and performance requirements (ISO 3471:2008; EN ISO 3471:2008) |
253. |
HRN EN ISO 3691-5:2014 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 5. dio: Viličari pogonjeni guranjem (ISO 3691-5:2014; EN ISO 3691-5:2014) |
EN ISO 3691-5:2014 |
Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014; EN ISO 3691-5:2014) |
254. |
HRN EN ISO 3691-6:2014 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 6. dio: Vozila za prijevoz tereta i osoblja (ISO 3691-6:2013; EN ISO 3691-6:2013) |
EN ISO 3691-6:2013 |
Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (ISO 3691-6:2013; EN ISO 3691-6:2013) |
255. |
HRN EN ISO 3691-6:2014/Ispr.1:2014 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 6. dio: Vozila za prijevoz tereta i osoblja (EN ISO 3691-6:2013/AC:2014) |
EN ISO 3691-6:2013/AC:2014 |
Industrial trucks – Safety requirements and verification – Part 6: Burden and personnel carriers (EN ISO 3691-6:2013/AC:2014) |
256. |
HRN EN ISO 3741:2011 |
Akustika – Određivanje razina zvučne snage i razina zvučne energije izvora buke uporabom zvučnoga tlaka – Precizne metode za odječne komore (ISO 3741:2010; EN ISO 3741:2010) |
EN ISO 3741:2010 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms (ISO 3741:2010; EN ISO 3741:2010) |
257. |
HRN EN ISO 3743-1:2011 |
Akustika – Određivanje razina zvučne snage i zvučne energetske razine izvora buke mjerenjem zvučnoga tlaka – Inženjerske metode za male, pokretne izvore u odječnim poljima – 1. dio: Usporedbena metoda za ispitne prostorije s tvrdim zidovima (ISO 3743-1:2010; EN ISO 3743-1:2010) |
EN ISO 3743-1:2010 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010; EN ISO 3743-1:2010) |
258. |
HRN EN ISO 3743-2:2010 |
Akustika – Određivanje razina zvučne snage izvora buke uz uporabu zvučnoga tlaka – Inženjerska metoda za male, pokretne izvore u odječnim poljima – 2. dio: Metode za specijalne odječne ispitne prostorije (ISO 3743-2:1994; EN ISO 3743-2:2009) |
EN ISO 3743-2:2009 |
Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for small, movable sources in reverberant fields – Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994; EN ISO 3743-2:2009) |
259. |
HRN EN ISO 3744:2011 |
Akustika – Određivanje razina zvučne snage i razina zvučne energije izvora buke mjerenjem zvučnog tlaka – Inženjerske metode za pretežno slobodno polje na reflektirajućoj ravnini (ISO 3744:2010; EN ISO 3744:2010) |
EN ISO 3744:2010 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010; EN ISO 3744:2010) |
260. |
HRN EN ISO 3745:2012 |
Akustika – Određivanje razina zvučne snage i razina zvučne energije izvora buke uporabom zvučnoga tlaka – Precizne metode u gluhim i polugluhim komorama (ISO 3745:2012; EN ISO 3745:2012) |
EN ISO 3745:2012 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012; EN ISO 3745:2012) |
261. |
HRN EN ISO 3746:2011 |
Akustika – Određivanje razina zvučne snage i razina zvučne energije izvora buke uz uporabu zvučnoga tlaka – Pregledna metoda uz uporabu mjerne plohe na reflektirajućoj ravnini (ISO 3746:2010; EN ISO 3746:2010) |
EN ISO 3746:2010 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010; EN ISO 3746:2010) |
262. |
HRN EN ISO 3747:2011 |
Akustika – Određivanje razina zvučne snage i razina zvučne energije izvora buke uz uporabu zvučnoga tlaka – Inženjerske/pregledne metode za uporabu in situ u odječnom okolišu (ISO 3747:2010; EN ISO 3747:2010) |
EN ISO 3747:2010 |
Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010; EN ISO 3747:2010) |
263. |
HRN EN ISO 4254-1:2013 |
Poljoprivredna mehanizacija – Sigurnost – 1. dio: Opći zahtjevi (ISO 4254-1:2013; EN ISO 4254-1:2013) |
EN ISO 4254-1:2013 |
Agricultural machinery – Safety – Part 1: General requirements (ISO 4254-1:2013; EN ISO 4254-1:2013) |
264. |
HRN EN ISO 4254-5:2010 |
Poljoprivredna mehanizacija – Sigurnost – 5. dio: Pokretani strojevi i oruđa za obradu tla (ISO 4254-5:2008; EN ISO 4254-5:2009) |
EN ISO 4254-5:2009 |
Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (ISO 4254-5:2008; EN ISO 4254-5:2009) |
265. |
HRN EN ISO 4254-5:2010/Ispr.1:2011 |
Poljoprivredna mehanizacija – Sigurnost – 5. dio: Pokretani strojevi i oruđa za obradu tla (EN ISO 4254-5:2009/AC:2011) |
EN ISO 4254-5:2009/AC:2011 |
Agricultural machinery – Safety – Part 5: Power-driven soil-working machines (EN ISO 4254-5:2009/AC:2011) |
266. |
HRN EN ISO 4254-6:2010 |
Poljoprivredna mehanizacija – Sigurnost – 6. dio: Prskalice i raspodjeljivači tekućih gnojiva (ISO 4254-6:2009; EN ISO 4254-6:2009) |
EN ISO 4254-6:2009 |
Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009; EN ISO 4254-6:2009) |
267. |
HRN EN ISO 4254-6:2010/Ispr.1:2011 |
Poljoprivredna mehanizacija – Sigurnost – 6. dio: Prskalice i raspodjeljivači tekućih gnojiva (EN ISO 4254-6:2009/AC:2010) |
EN ISO 4254-6:2009/AC:2010 |
Agricultural machinery – Safety – Part 6: Sprayers and liquid fertilizer distributors (EN ISO 4254-6:2009/AC:2010) |
268. |
HRN EN ISO 4254-7:2010 |
Poljoprivredna mehanizacija – Sigurnost – 7. dio: Kombajni za žito, krmu i pamuk (ISO 4254-7:2008; EN ISO 4254-7:2009) |
EN ISO 4254-7:2009 |
Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008; EN ISO 4254-7:2009) |
269. |
HRN EN ISO 4254-7:2010/Ispr.1:2011 |
Poljoprivredna mehanizacija – Sigurnost – 7. dio: Kombajni za žito, krmu i pamuk (EN ISO 4254-7:2009/AC:2010) |
EN ISO 4254-7:2009/AC:2010 |
Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters and cotton harvesters (EN ISO 4254-7:2009/AC:2010) |
270. |
HRN EN ISO 4254-10:2010 |
Poljoprivredna mehanizacija – Sigurnost – 10. dio: Okretne rašlje i grablje (ISO 4254-10:2009; EN ISO 4254-10:2009) |
EN ISO 4254-10:2009 |
Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (ISO 4254-10:2009; EN ISO 4254-10:2009) |
271. |
HRN EN ISO 4254-10:2010/Ispr.1:2011 |
Poljoprivredna mehanizacija – Sigurnost – 10. dio: Okretne rašlje i grablje (EN ISO 4254-10:2009/AC:2010) |
EN ISO 4254-10:2009/AC:2010 |
Agricultural machinery – Safety – Part 10: Rotary tedders and rakes (EN ISO 4254-10:2009/AC:2010) |
272. |
HRN EN ISO 4254-11:2012 |
Poljoprivredna mehanizacija – Sigurnost – 11. dio: Sakupljač bala (ISO 4254-11:2010; EN ISO 4254-11:2010) |
EN ISO 4254-11:2010 |
Agricultural machinery – Safety – Part 11: Pick-up balers (ISO 4254-11:2010; EN ISO 4254-11:2010) |
273. |
HRN EN ISO 4254-12:2013 |
Poljoprivredna mehanizacija – Sigurnost – 12. dio: Kružne vertikalne kosilice i sitnilice (ISO 4254-12:2012; EN ISO 4254-12:2012) |
EN ISO 4254-12:2012 |
Agricultural machinery – Safety – Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012; EN ISO 4254-12:2012) |
274. |
HRN EN ISO 4413:2012 |
Hidraulički pogon – Osnovna uloga i sigurnosni zahtjevi za sustave i njihove dijelove (ISO 4413:2010; EN ISO 4413:2010) |
EN ISO 4413:2010 |
Hydraulic fluid power – General rules and safety requirements for systems and their components (ISO 4413:2010; EN ISO 4413:2010) |
275. |
HRN EN ISO 4414:2012 |
Pneumatski pogon – Osnovna pravila i sigurnosni zahtjevi za sustave i njihove dijelove (ISO 4414:2010; EN ISO 4414:2010) |
EN ISO 4414:2010 |
Pneumatic fluid power – General rules and safety requirements for systems and their components (ISO 4414:2010; EN ISO 4414:2010) |
276. |
HRN EN ISO 4871:2010 |
Akustika – Deklariranje i provjera vrijednosti emisije buke strojeva i opreme (ISO 4871:1996; EN ISO 4871:2009) |
EN ISO 4871:2009 |
Acoustics – Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996; EN ISO 4871:2009) |
277. |
HRN EN ISO 5136:2010 |
Akustika – Određivanje zvučne snage koju u kanal zrače ventilatori i drugi ventilacijski uređaji – Metoda mjerenja u kanalu (ISO 5136:2003; EN ISO 5136:2009) |
EN ISO 5136:2009 |
Acoustics – Determination of sound power radiated into a duct by fans and other air-moving devices – In-duct method (ISO 5136:2003; EN ISO 5136:2009) |
278. |
HRN EN ISO 5395-1:2014 |
Oprema za vrtove i parkove – Sigurnosni zahtjevi za kosilice trave pogonjene motorom s unutrašnjim izgaranjem – 1. dio: Nazivlje i uobičajena ispitivanja (ISO 5395-1:2013; EN ISO 5395-1:2013) |
EN ISO 5395-1:2013 |
Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 1: Terminology and common tests (ISO 5395-1:2013; EN ISO 5395-1:2013) |
279. |
HRN EN ISO 5395-2:2013 |
Oprema za vrtove i parkove – Sigurnosni zahtjevi za kosilice trave pogonjene motorom s unutrašnjim izgaranjem – 2. dio: Kosilice trave s rukovateljem koji hoda (ISO 5395-2:2013; EN ISO 5395-2:2013) |
EN ISO 5395-2:2013 |
Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013; EN ISO 5395-2:2013) |
280. |
HRN EN ISO 5395-3:2014 |
Oprema za vrtove i parkove – Sigurnosni zahtjevi za kosilice trave pogonjene motorom s unutrašnjim izgaranjem – 3. dio: Kosilice trave s rukovateljem koji sjedi na kosilici (ISO 5395-3:2013; EN ISO 5395-3:2013) |
EN ISO 5395-3:2013 |
Garden equipment – Safety requirements for combustion-engine-powered lawnmowers – Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013; EN ISO 5395-3:2013) |
281. |
HRN EN ISO 5674:2010 |
Traktori i poljoprivredna i šumarska mehanizacija – Štitnici za priključno vratilo traktora (PV) – Proba čvrstoće i nosivosti te uvjeti za prihvaćanje (ISO 5674:2004, ispravljena verzija 2005-07-01; EN ISO 5674:2009) |
EN ISO 5674:2009 |
Tractors and machinery for agriculture and forestry – Guards for power take-off (PTO) drive-shafts – Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01; EN ISO 5674:2009) |
282. |
HRN EN ISO 6682:2009 |
Strojevi za zemljane radove – Zone udobnosti i dohvata komandi (ISO 6682:1986+Amd 1:1989; EN ISO 6682:2008) |
EN ISO 6682:2008 |
Earth-moving machinery – Zones of comfort and reach for controls (ISO 6682:1986+Amd 1:1989; EN ISO 6682:2008) |
283. |
HRN EN ISO 6683:2009 |
Strojevi za zemljane radove – Sigurnosni pojasevi i njihovi priključci – Zahtjevi za izvedbu i ispitivanja (ISO 6683:2005; EN ISO 6683:2008) |
EN ISO 6683:2008 |
Earth-moving machinery – Seat belts and seat belt anchorages – Performance requirements and tests (ISO 6683:2005; EN ISO 6683:2008) |
284. |
HRN EN ISO 7096:2009 |
Strojevi za zemljane radove – Laboratorijska procjena vibracija sjedala rukovatelja (ISO 7096:2000; EN ISO 7096:2008) |
EN ISO 7096:2008 |
Earth-moving machinery – Laboratory evaluation of operator seat vibration (ISO 7096:2000; EN ISO 7096:2008) |
285. |
HRN EN ISO 7096:2009/Ispr.1:2009 |
Strojevi za zemljane radove – Laboratorijska procjena vibracija sjedala rukovatelja (EN ISO 7096:2008/AC:2009) |
EN ISO 7096:2008/AC:2009 |
Earth-moving machinery – Laboratory evaluation of operator seat vibration (EN ISO 7096:2008/AC:2009) |
286. |
HRN EN ISO 7235:2010 |
Akustika – Laboratorijski mjerni postupci za zvučne prigušivače u kanalima i završnim jedinicama kanala – Uneseno prigušenje, šum strujanja i ukupni pad tlaka (ISO 7235:2003; EN ISO 7235:2009) |
EN ISO 7235:2009 |
Acoustics – Laboratory measurement procedures for ducted silencers and air-terminal units – Insertion loss, flow noise and total pressure loss (ISO 7235:2003; EN ISO 7235:2009) |
287. |
HRN EN ISO 7731:2010 |
Ergonomija – Signali opasnosti za javne i radne prostore – Zvučni signali opasnosti (ISO 7731:2003; EN ISO 7731:2008) |
EN ISO 7731:2008 |
Ergonomics – Danger signals for public and work areas – Auditory danger signals (ISO 7731:2003; EN ISO 7731:2008) |
288. |
HRN EN ISO 8230-1:2009 |
Sigurnosni zahtjevi za strojeve za suho čišćenje – 1. dio: Opći sigurnosni zahtjevi (ISO 8230-1:2008; EN ISO 8230-1:2008) |
EN ISO 8230-1:2008 |
Safety requirements for dry-cleaning machines – Part 1: Common safety requirements (ISO 8230-1:2008; EN ISO 8230-1:2008) |
289. |
HRN EN ISO 8230-2:2009 |
Sigurnosni zahtjevi za strojeve za suho čišćenje – 2. dio: Strojevi koji upotrebljavaju tetrakloretilen (ISO 8230-2:2008; EN ISO 8230-2:2008) |
EN ISO 8230-2:2008 |
Safety requirements for dry-cleaning machines – Part 2: Machines using perchloroethylene (ISO 8230-2:2008; EN ISO 8230-2:2008) |
290. |
HRN EN ISO 8230-3:2009 |
Sigurnosni zahtjevi za strojeve za suho čišćenje – 3. dio: Strojevi koji upotrebljavaju zapaljivu otopinu (ISO 8230-3:2008; EN ISO 8230-3:2008) |
EN ISO 8230-3:2008 |
Safety requirements for dry-cleaning machines – Part 3: Machines using combustible solvents (ISO 8230-3:2008; EN ISO 8230-3:2008) |
291. |
HRN EN ISO 9614-1:2010 |
Akustika – Određivanje razina zvučne snage izvora buke uporabom jakosti zvuka – 1. dio: Mjerenje na diskretnim točkama (ISO 9614-1:1993; EN ISO 9614-1:2009) |
EN ISO 9614-1:2009 |
Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 1: Measurement at discrete points (ISO 9614-1:1993; EN ISO 9614-1:2009) |
292. |
HRN EN ISO 9614-3:2010 |
Akustika – Određivanje razina zvučne snage izvora buke uporabom jakosti zvuka – 3. dio: Precizna metoda skeniranjem (ISO 9614-3:2002; EN ISO 9614-3:2009) |
EN ISO 9614-3:2009 |
Acoustics – Determination of sound power levels of noise sources using sound intensity – Part 3: Precision method for measurement by scanning (ISO 9614-3:2002; EN ISO 9614-3:2009) |
293. |
HRN EN ISO 9902-1:2004 |
Tekstilni strojevi – Određivanje emisije buke – 1. dio: Opći zahtjevi (ISO 9902-1:2001; EN ISO 9902-1:2001) |
EN ISO 9902-1:2001 |
Textile machinery – Noise test code – Part 1: Common requirements (ISO 9902-1:2001; EN ISO 9902-1:2001) |
294. |
HRN EN ISO 9902-1:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 1. dio: Opći zahtjevi (ISO 9902-1:2001/Amd 1:2009; EN ISO 9902-1:2001/A1:2009) |
EN ISO 9902-1:2001/A1:2009 |
Textile machinery – Noise test code – Part 1: Common requirements (ISO 9902-1:2001/Amd 1:2009; EN ISO 9902-1:2001/A1:2009) |
295. |
HRN EN ISO 9902-2:2004 |
Tekstilni strojevi – Određivanje emisije buke – 2. dio: Strojevi za pripremu predenja i prelački strojevi (strojevi za predenje) (ISO 9902-2:2001; EN ISO 9902-2:2001) |
EN ISO 9902-2:2001 |
Textile machinery – Noise test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001; EN ISO 9902-2:2001) |
296. |
HRN EN ISO 9902-2:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 2. dio: Strojevi za pripremu predenja i prelački strojevi (strojevi za predenje) (ISO 9902-2:2001/Amd 1:2009; EN ISO 9902-2:2001/A1:2009) |
EN ISO 9902-2:2001/A1:2009 |
Textile machinery – Noise test code – Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001/Amd 1:2009; EN ISO 9902-2:2001/A1:2009) |
297. |
HRN EN ISO 9902-3:2004 |
Tekstilni strojevi – Određivanje emisije buke – 3. dio: Strojevi za netkane tekstile (ISO 9902-3:2001; EN ISO 9902-3:2001) |
EN ISO 9902-3:2001 |
Textile machinery – Noise test code – Part 3: Nonwoven machines (ISO 9902-3:2001; EN ISO 9902-3:2001) |
298. |
HRN EN ISO 9902-3:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 3. dio: Strojevi za netkane tekstile (ISO 9902-3:2001/Amd 1:2009; EN ISO 9902-3:2001/A1:2009) |
EN ISO 9902-3:2001/A1:2009 |
Textile machinery – Noise test code – Part 3: Nonwoven machines (ISO 9902-3:2001/Amd 1:2009; EN ISO 9902-3:2001/A1:2009) |
299. |
HRN EN ISO 9902-4:2004 |
Tekstilni strojevi – Određivanje emisije buke – 4. dio: Strojevi za preradu pređe, izradu uzica i užadi (ISO 9902-4:2001; EN ISO 9902-4:2001) |
EN ISO 9902-4:2001 |
Textile machinery – Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001; EN ISO 9902-4:2001) |
300. |
HRN EN ISO 9902-4:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 4. dio: Strojevi za preradu pređe, izradu uzica i užad (ISO 9902-4:2001/Amd 1:2009; EN ISO 9902-4:2001/A1:2009) |
EN ISO 9902-4:2001/A1:2009 |
Textile machinery – Noise test code – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001/Amd 1:2009; EN ISO 9902-4:2001/A1:2009) |
301. |
HRN EN ISO 9902-5:2004 |
Tekstilni strojevi – Određivanje emisije buke – 5. dio: Tkalački strojevi i strojevi za pripremu pletenja (ISO 9902-5:2001; EN ISO 9902-5:2001) |
EN ISO 9902-5:2001 |
Textile machinery – Noise test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001; EN ISO 9902-5:2001) |
302. |
HRN EN ISO 9902-5:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 5. dio: Tkalački strojevi i strojevi za pripremu pletenja (ISO 9902-5:2001/Amd 1:2009; EN ISO 9902-5:2001/A1:2009) |
EN ISO 9902-5:2001/A1:2009 |
Textile machinery – Noise test code – Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001/Amd 1:2009; EN ISO 9902-5:2001/A1:2009) |
303. |
HRN EN ISO 9902-6:2004 |
Tekstilni strojevi – Određivanje emisije buke – 6. dio: Strojevi za proizvodnju plošnih tekstila (ISO 9902-6:2001; EN ISO 9902-6:2001) |
EN ISO 9902-6:2001 |
Textile machinery – Noise test code – Part 6: Fabric manufacturing machinery (ISO 9902-6:2001; EN ISO 9902-6:2001) |
304. |
HRN EN ISO 9902-6:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 6. dio: Strojevi za proizvodnju plošnih tekstila (ISO 9902-6:2001/Amd 1:2009; EN ISO 9902-6:2001/A1:2009) |
EN ISO 9902-6:2001/A1:2009 |
Textile machinery – Noise test code – Part 6: Fabric manufacturing machinery (ISO 9902-6:2001/Amd 1:2009; EN ISO 9902-6:2001/A1:2009) |
305. |
HRN EN ISO 9902-7:2004 |
Tekstilni strojevi – Određivanje emisije buke – 7. dio: Strojevi za bojenje i oplemenjivanje (ISO 9902-7:2001; EN ISO 9902-7:2001) |
EN ISO 9902-7:2001 |
Textile machinery – Noise test code – Part 7: Dyeing and finishing machinery (ISO 9902-7:2001; EN ISO 9902-7:2001) |
306. |
HRN EN ISO 9902-7:2004/A1:2009 |
Tekstilni strojevi – Određivanje emisije buke – 7. dio: Strojevi za bojenje i oplemenjivanje (ISO 9902-7:2001/Amd 1:2009; EN ISO 9902-7:2001/A1:2009) |
EN ISO 9902-7:2001/A1:2009 |
Textile machinery – Noise test code – Part 7: Dyeing and finishing machinery (ISO 9902-7:2001/Amd 1:2009; EN ISO 9902-7:2001/A1:2009) |
307. |
HRN EN ISO 10218-1:2012 |
Roboti i robotski uređaji – Sigurnosni zahtjevi za industrijske robote – 1. dio: Roboti (ISO 10218-1:2011; EN ISO 10218-1:2011) |
EN ISO 10218-1:2011 |
Robots and robotic devices – Safety requirements for industrial robots – Part 1: Robots (ISO 10218-1:2011; EN ISO 10218-1:2011) |
308. |
HRN EN ISO 10218-2:2012 |
Roboti i robotski uređaji – Sigurnosni zahtjevi za industrijske robote – 2. dio: Robotski sustavi i integracija (ISO 10218-2:2011; EN ISO 10218-2:2011) |
EN ISO 10218-2:2011 |
Robots and robotic devices – Safety requirements for industrial robots – Part 2: Robot systems and integration (ISO 10218-2:2011; EN ISO 10218-2:2011) |
309. |
HRN EN ISO 10472-1:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 1. dio: Opći zahtjevi (ISO 10472-1:1997; EN ISO 10472-1:2008) |
EN ISO 10472-1:2008 |
Safety requirements for industrial laundry machinery – Part 1: Common requirements (ISO 10472-1:1997; EN ISO 10472-1:2008) |
310. |
HRN EN ISO 10472-2:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 2. dio: Strojevi za pranje i perilice s izdvajačem (ISO 10472-2:1997; EN ISO 10472-2:2008) |
EN ISO 10472-2:2008 |
Safety requirements for industrial laundry machinery – Part 2: Washing machines and washer-extractors (ISO 10472-2:1997; EN ISO 10472-2:2008) |
311. |
HRN EN ISO 10472-3:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 3. dio: Tunelske linije za pranje uključujući i složene strojeve (ISO 10472-3:1997; EN ISO 10472-3:2008) |
EN ISO 10472-3:2008 |
Safety requirements for industrial laundry machinery – Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997; EN ISO 10472-3:2008) |
312. |
HRN EN ISO 10472-4:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 4. dio: Sušnice (sušilice) zrakom (ISO 10472-4:1997; EN ISO 10472-4:2008) |
EN ISO 10472-4:2008 |
Safety requirements for industrial laundry machinery – Part 4: Air dryers (ISO 10472-4:1997; EN ISO 10472-4:2008) |
313. |
HRN EN ISO 10472-5:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 5. dio: Strojevi za ravno glačanje, strojevi za dovođenje i preklapanje (ISO 10472-5:1997; EN ISO 10472-5:2008) |
EN ISO 10472-5:2008 |
Safety requirements for industrial laundry machinery – Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997; EN ISO 10472-5:2008) |
314. |
HRN EN ISO 10472-6:2009 |
Sigurnosni zahtjevi za strojeve za industrijsko pranje – 6. dio: Preše za glačanje i zavarivanje (ISO 10472-6:1997; EN ISO 10472-6:2008) |
EN ISO 10472-6:2008 |
Safety requirements for industrial laundry machinery – Part 6: Ironing and fusing presses (ISO 10472-6:1997; EN ISO 10472-6:2008) |
315. |
HRN EN ISO 10517:2010 |
Motorni čistači – Sigurnost (ISO 10517:2009; EN ISO 10517:2009) |
EN ISO 10517:2009 |
Powered hand-held hedge trimmers – Safety (ISO 10517:2009; EN ISO 10517:2009) |
316. |
HRN EN ISO 10517:2010/A1:2014 |
Motorni čistači – Sigurnost (ISO 10517:2009/Amd 1:2013; EN ISO 10517:2009/A1:2013) |
EN ISO 10517:2009/A1:2013 |
Powered hand-held hedge trimmers – Safety (ISO 10517:2009/Amd 1:2013; EN ISO 10517:2009/A1:2013) |
317. |
HRN EN ISO 10821:2008 |
Industrijski šivaći strojevi – Sigurnosni zahtjevi za šivaće strojeve, jedinice i sustave (ISO 10821:2005; EN ISO 10821:2005) |
EN ISO 10821:2005 |
Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821:2005; EN ISO 10821:2005) |
318. |
HRN EN ISO 10821:2008/A1:2011 |
Industrijski šivaći strojevi – Sigurnosni zahtjevi za šivaće strojeve, jedinice i sustave (ISO 10821:2005/Amd 1:2009, Ispravljena verzija 2009-08-01; EN ISO 10821:2005/A1:2009) |
EN ISO 10821:2005/A1:2009 |
Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01; EN ISO 10821:2005/A1:2009) |
319. |
HRN EN ISO 11102-1:2010 |
Klipni motori s unutrašnjim izgaranjem – Oprema za ručno pokretanje – 1. dio: Sigurnosni zahtjevi i ispitivanja (ISO 11102-1:1997; EN ISO 11102-1:2009) |
EN ISO 11102-1:2009 |
Reciprocating internal combustion engines – Handle starting equipment – Part 1: Safety requirements and tests (ISO 11102-1:1997; EN ISO 11102-1:2009) |
320. |
HRN EN ISO 11102-2:2010 |
Klipni motori s unutrašnjim izgaranjem – Oprema za ručno pokretanje – 2. dio: Metoda ispitivanja kuta preopterećenja (ISO 11102-2:1997; EN ISO 11102-2:2009) |
EN ISO 11102-2:2009 |
Reciprocating internal combustion engines – Handle starting equipment – Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997; EN ISO 11102-2:2009) |
321. |
HRN EN ISO 11111-1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 1. dio: Opći zahtjevi (ISO 11111-1:2005; EN ISO 11111-1:2009) |
EN ISO 11111-1:2009 |
Textile machinery – Safety requirements – Part 1: Common requirements (ISO 11111-1:2005; EN ISO 11111-1:2009) |
322. |
HRN EN ISO 11111-2:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 2. dio: Strojevi za pripremu predenja i prelački strojevi (ISO 11111-2:2005; EN ISO 11111-2:2005) |
EN ISO 11111-2:2005 |
Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005; EN ISO 11111-2:2005) |
323. |
HRN EN ISO 11111-2:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 2. dio: Strojevi za pripremu predenja i prelački strojevi – Amandman 1 (ISO 11111-2:2005/Amd 1:2009; EN ISO 11111-2:2005/A1:2009) |
EN ISO 11111-2:2005/A1:2009 |
Textile machinery – Safety requirements – Part 2: Spinning preparatory and spinning machines – Amendment 1 (ISO 11111-2:2005/Amd 1:2009; EN ISO 11111-2:2005/A1:2009) |
324. |
HRN EN ISO 11111-3:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 3. dio: Strojevi za netkani tekstil (ISO 11111-3:2005; EN ISO 11111-3:2005) |
EN ISO 11111-3:2005 |
Textile machinery – Safety requirements – Part 3: Nonwoven machinery (ISO 11111-3:2005; EN ISO 11111-3:2005) |
325. |
HRN EN ISO 11111-3:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 3. dio: Strojevi za netkani tekstil – Amandman 1 (ISO 11111-3:2005/Amd 1:2009; EN ISO 11111-3:2005/A1:2009) |
EN ISO 11111-3:2005/A1:2009 |
Textile machinery – Safety requirements – Part 3: Nonwoven machinery – Amendment 1 (ISO 11111-3:2005/Amd 1:2009; EN ISO 11111-3:2005/A1:2009) |
326. |
HRN EN ISO 11111-4:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 4. dio: Prerada pređe, strojevi za izradu uzica i užadi (ISO 11111-4:2005; EN ISO 11111-4:2005) |
EN ISO 11111-4:2005 |
Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005; EN ISO 11111-4:2005) |
327. |
HRN EN ISO 11111-4:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 4. dio: Prerada pređe, strojevi za izradu uzica i užadi – Amandman 1 (ISO 11111-4:2005/Amd 1:2009; EN ISO 11111-4:2005/A1:2009) |
EN ISO 11111-4:2005/A1:2009 |
Textile machinery – Safety requirements – Part 4: Yarn processing, cordage and rope manufacturing machinery – Amendment 1 (ISO 11111-4:2005/Amd 1:2009; EN ISO 11111-4:2005/A1:2009) |
328. |
HRN EN ISO 11111-5:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 5. dio: Strojevi za pripremu tkanja i pletenja (ISO 11111-5:2005; EN ISO 11111-5:2005) |
EN ISO 11111-5:2005 |
Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005; EN ISO 11111-5:2005) |
329. |
HRN EN ISO 11111-5:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 5. dio: Strojevi za pripremu tkanja i pletenja – Amandman 1 (ISO 11111-5:2005/Amd 1:2009; EN ISO 11111-5:2005/A1:2009) |
EN ISO 11111-5:2005/A1:2009 |
Textile machinery – Safety requirements – Part 5: Preparatory machinery to weaving and knitting – Amendment 1 (ISO 11111-5:2005/Amd 1:2009; EN ISO 11111-5:2005/A1:2009) |
330. |
HRN EN ISO 11111-6:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 6. dio: Strojevi za proizvodnju plošnih tekstila (ISO 11111-6:2005; EN ISO 11111-6:2005) |
EN ISO 11111-6:2005 |
Textile machinery – Safety requirements – Part 6: Fabric manufacturing machinery (ISO 11111-6:2005; EN ISO 11111-6:2005) |
331. |
HRN EN ISO 11111-6:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 6. dio: Strojevi za proizvodnju plošnih tekstila – Amandman 1 (ISO 11111-6:2005/Amd 1:2009; EN ISO 11111-6:2005/A1:2009) |
EN ISO 11111-6:2005/A1:2009 |
Textile machinery – Safety requirements – Part 6: Fabric manufacturing machinery – Amendment 1 (ISO 11111-6:2005/Amd 1:2009; EN ISO 11111-6:2005/A1:2009) |
332. |
HRN EN ISO 11111-7:2008 |
Tekstilni strojevi – Sigurnosni zahtjevi – 7. dio: Strojevi za bojenje i oplemenjivanje (ISO 11111-7:2005; EN ISO 11111-7:2005) |
EN ISO 11111-7:2005 |
Textile machinery – Safety requirements – Part 7: Dyeing and finishing machinery (ISO 11111-7:2005; EN ISO 11111-7:2005) |
333. |
HRN EN ISO 11111-7:2008/A1:2009 |
Tekstilni strojevi – Sigurnosni zahtjevi – 7. dio: Strojevi za bojenje i oplemenjivanje – Amandman 1 (ISO 11111-7:2005/Amd 1:2009; EN ISO 11111-7:2005/A1:2009) |
EN ISO 11111-7:2005/A1:2009 |
Textile machinery – Safety requirements – Part 7: Dyeing and finishing machinery – Amendment 1 (ISO 11111-7:2005/Amd 1:2009; EN ISO 11111-7:2005/A1:2009) |
334. |
HRN EN ISO 11145:2010 |
Optika i fotonika – Laseri i pridružena oprema – Terminološki rječnik i simboli (ISO 11145:2006; EN ISO 11145:2008) |
EN ISO 11145:2008 |
Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols (ISO 11145:2006; EN ISO 11145:2008) |
335. |
HRN EN ISO 11148-1:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 1. dio: Montažni alati za mehaničko spajanje bez navoja (ISO 11148-1:2011; EN ISO 11148-1:2011) |
EN ISO 11148-1:2011 |
Hand-held non-electric power tools – Safety requirements – Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011; EN ISO 11148-1:2011) |
336. |
HRN EN ISO 11148-2:2012 |
Ručni neelektrični aparati – Sigurnosni zahtjevi – 2. dio: Alati za odrezivanje i narezivanje (ISO 11148-2:2011; EN ISO 11148-2:2011) |
EN ISO 11148-2:2011 |
Hand-held non-electric power tools – Safety requirements – Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011; EN ISO 11148-2:2011) |
337. |
HRN EN ISO 11148-3:2013 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 3. dio: Svrdla i navojnice (ISO 11148-3:2012; EN ISO 11148-3:2012) |
EN ISO 11148-3:2012 |
Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers (ISO 11148-3:2012; EN ISO 11148-3:2012) |
338. |
HRN EN ISO 11148-4:2013 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 4. dio: Nerotirajući udarni alati (ISO 11148-4:2012; EN ISO 11148-4:2012) |
EN ISO 11148-4:2012 |
Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools (ISO 11148-4:2012; EN ISO 11148-4:2012) |
339. |
HRN EN ISO 11148-5:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 5. dio: Rotirajuća udarna svrdla (ISO 11148-5:2011; EN ISO 11148-5:2011) |
EN ISO 11148-5:2011 |
Hand-held non-electric power tools – Safety requirements – Part 5: Rotary percussive drills (ISO 11148-5:2011; EN ISO 11148-5:2011) |
340. |
HRN EN ISO 11148-6:2013 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 6. dio: Montažni alati za spajanje navojem (ISO 11148-6:2012; EN ISO 11148-6:2012) |
EN ISO 11148-6:2012 |
Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012; EN ISO 11148-6:2012) |
341. |
HRN EN ISO 11148-7:2013 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 7. dio: Alati za bušenje (ISO 11148-7:2012; EN ISO 11148-7:2012) |
EN ISO 11148-7:2012 |
Hand-held non-electric power tools – Safety requirements – Part 7: Grinders (ISO 11148-7:2012; EN ISO 11148-7:2012) |
342. |
HRN EN ISO 11148-8:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 8. dio: Alati za pjeskarenje i poliranje (ISO 11148-8:2011; EN ISO 11148-8:2011) |
EN ISO 11148-8:2011 |
Hand-held non-electric power tools – Safety requirements – Part 8: Sanders and polishers (ISO 11148-8:2011; EN ISO 11148-8:2011) |
343. |
HRN EN ISO 11148-9:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 9. dio: Brusilice (ISO 11148-9:2011; EN ISO 11148-9:2011) |
EN ISO 11148-9:2011 |
Hand-held non-electric power tools – Safety requirements – Part 9: Die grinders (ISO 11148-9:2011; EN ISO 11148-9:2011) |
344. |
HRN EN ISO 11148-10:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 10. dio: Alati za stezanje-sabijanje (ISO 11148-10:2011; EN ISO 11148-10:2011) |
EN ISO 11148-10:2011 |
Hand-held non-electric power tools – Safety requirements – Part 10: Compression power tools (ISO 11148-10:2011; EN ISO 11148-10:2011) |
345. |
HRN EN ISO 11148-11:2012 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 11. dio: Probijači i škare (ISO 11148-11:2011; EN ISO 11148-11:2011) |
EN ISO 11148-11:2011 |
Hand-held non-electric power tools – Safety requirements – Part 11: Nibblers and shears (ISO 11148-11:2011; EN ISO 11148-11:2011) |
346. |
HRN EN ISO 11148-12:2013 |
Ručni neelektrični alati – Sigurnosni zahtjevi – 12. dio: Kružne, oscilirajuće i ubodne pile (ISO 11148-12:2012; EN ISO 11148-12:2012) |
EN ISO 11148-12:2012 |
Hand-held non-electric power tools – Safety requirements – Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012; EN ISO 11148-12:2012) |
347. |
HRN EN ISO 11161:2008 |
Sigurnost strojeva – Integrirani sustavi proizvodnje – Osnovni zahtjevi (ISO 11161:2007; EN ISO 11161:2007) |
EN ISO 11161:2007 |
Safety of machinery – Integrated manufacturing systems – Basic requirements (ISO 11161:2007; EN ISO 11161:2007) |
348. |
HRN EN ISO 11161:2008/A1:2010 |
Sigurnost strojeva – Integrirani sustavi proizvodnje – Osnovni zahtjevi (ISO 11161:2007/Amd 1:2010; EN ISO 11161:2007/A1:2010) |
EN ISO 11161:2007/A1:2010 |
Safety of machinery – Integrated manufacturing systems – Basic requirements (ISO 11161:2007/Amd 1:2010; EN ISO 11161:2007/A1:2010) |
349. |
HRN EN ISO 11200:2010 |
Akustika – Buka koju zrače strojevi i oprema – Smjernice za uporabu temeljnih norma za određivanje zvučnoga tlaka emisije na radnome mjestu i na drugim specificiranim mjestima (ISO 11200:1995+Cor 1:1997; EN ISO 11200:2009) |
EN ISO 11200:2009 |
Acoustics – Noise emitted by machinery and equipment – Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995+Cor 1:1997; EN ISO 11200:2009) |
350. |
HRN EN ISO 11201:2010 |
Akustika – Buka koju emitiraju strojevi i oprema – Određivanje razina zvučnoga tlaka emisije na radnome mjestu i drugim specificiranim mjestima u pretežno slobodnom zvučnom polju iznad reflektirajuće ravnine s neznatnim korekcijama utjecaja okoliša (ISO 11201:2010; EN ISO 11201:2010) |
EN ISO 11201:2010 |
Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010; EN ISO 11201:2010) |
351. |
HRN EN ISO 11202:2010 |
Akustika – Buka koju emitiraju strojevi i oprema – Određivanje razina zvučnoga tlaka emisije na radnome mjestu i drugim specificiranim mjestima primjenom približnih korekcija utjecaja okoliša (ISO 11202:2010; EN ISO 11202:2010) |
EN ISO 11202:2010 |
Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010; EN ISO 11202:2010) |
352. |
HRN EN ISO 11203:2010 |
Akustika – Buka koju emitiraju strojevi i oprema – Određivanje razina zvučnoga tlaka emisije na radnome mjestu i drugim specificiranim mjestima iz razine zvučne snage (ISO 11203:1995; EN ISO 11203:2009) |
EN ISO 11203:2009 |
Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995; EN ISO 11203:2009) |
353. |
HRN EN ISO 11204:2010 |
Akustika – Buka koju emitiraju strojevi i oprema – Određivanje razina zvučnoga tlaka emisije na radnome mjestu i drugim specificiranim mjestima primjenom točnih korekcija utjecaja okoliša (ISO 11204:2010; EN ISO 11204:2010) |
EN ISO 11204:2010 |
Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010; EN ISO 11204:2010) |
354. |
HRN EN ISO 11205:2010 |
Akustika – Buka koju emitiraju strojevi i oprema – Inženjerska metoda za određivanje razina zvučnog tlaka emisije in situ na radnome mjestu i drugim specificiranim mjestima uporabom jakosti zvuka (ISO 11205:2003; EN ISO 11205:2009) |
EN ISO 11205:2009 |
Acoustics – Noise emitted by machinery and equipment – Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003; EN ISO 11205:2009) |
355. |
HRN EN ISO 11252:2013 |
Laseri i pridružena oprema – Laserski uređaj – Minimalni zahtjevi za dokumentaciju (ISO 11252:2013; EN ISO 11252:2013) |
EN ISO 11252:2013 |
Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2013; EN ISO 11252:2013) |
356. |
HRN EN ISO 11546-1:2010 |
Akustika – Određivanje zvučne izolacije oklopa – 1. dio: Mjerenja u laboratorijskim uvjetima (u svrhu deklariranja svojstava) (ISO 11546-1:1995; EN ISO 11546-1:2009) |
EN ISO 11546-1:2009 |
Acoustics – Determination of sound insulation performances of enclosures – Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995; EN ISO 11546-1:2009) |
357. |
HRN EN ISO 11546-2:2010 |
Akustika – Određivanje zvučne izolacije oklopa – 2. dio: Mjerenja in situ (u svrhu prihvaćanja i provjere) (ISO 11546-2:1995; EN ISO 11546-2:2009) |
EN ISO 11546-2:2009 |
Acoustics – Determination of sound insulation performances of enclosures – Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995; EN ISO 11546-2:2009) |
358. |
HRN EN ISO 11553-1:2010 |
Sigurnost strojeva – Laserski strojevi za obradu – 1. dio: Opći zahtjevi za sigurnost (ISO 11553-1:2005; EN ISO 11553-1:2008) |
EN ISO 11553-1:2008 |
Safety of machinery – Laser processing machines – Part 1: General safety requirements (ISO 11553-1:2005; EN ISO 11553-1:2008) |
359. |
HRN EN ISO 11553-2:2010 |
Sigurnost strojeva – Laserski strojevi za obradu – 2. dio: Zahtjevi za sigurnost ručnih laserskih uređaja za obradu (ISO 11553-2:2007; EN ISO 11553-2:2008) |
EN ISO 11553-2:2008 |
Safety of machinery – Laser processing machines – Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007; EN ISO 11553-2:2008) |
360. |
HRN EN ISO 11553-3:2013 |
Sigurnost strojeva – Laserski strojevi za obradu – 3. dio: Smanjenje buke i metode mjerenja buke laserskih strojeva, ručnih laserskih uređaja za obradu i dodatne pomoćne opreme (stupanj preciznosti 2) (ISO 11553-3:2013; EN ISO 11553-3:2013) |
EN ISO 11553-3:2013 |
Safety of machinery – Laser processing machines – Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013; EN ISO 11553-3:2013) |
361. |
HRN EN ISO 11554:2008 |
Optika i fotonika – Laseri i pridružena oprema – Ispitne metode za snagu, energiju i vremenske značajke laserskog snopa (ISO 11554:2006; EN ISO 11554:2008) |
EN ISO 11554:2008 |
Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006; EN ISO 11554:2008) |
362. |
HRN EN ISO 11680-1:2013 |
Šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje za motorne škare za rad na visini – 1. dio: Strojevi opremljeni motorom s unutrašnjim izgaranjem (ISO 11680-1:2011; EN ISO 11680-1:2011) |
EN ISO 11680-1:2011 |
Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011; EN ISO 11680-1:2011) |
363. |
HRN EN ISO 11680-2:2013 |
Šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje za motorne škare za rad na visini – 2. dio: Strojevi za upotrebu sa stražnjim pogonom (ISO 11680-2:2011; EN ISO 11680-2:2011) |
EN ISO 11680-2:2011 |
Machinery for forestry – Safety requirements and testing for pole-mounted powered pruners – Part 2: Machines for use with back-pack power source (ISO 11680-2:2011; EN ISO 11680-2:2011) |
364. |
HRN EN ISO 11681-1:2013 |
Šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje motornih pila – 1. dio: Motorne pile za šumarsku praksu (ISO 11681-1:2011; EN ISO 11681-1:2011) |
EN ISO 11681-1:2011 |
Machinery for forestry – Portable chain-saw safety requirements and testing – Part 1: Chain-saws for forest service (ISO 11681-1:2011; EN ISO 11681-1:2011) |
365. |
HRN EN ISO 11681-2:2013 |
Šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje motornih pila – 2. dio: Motorne pile za njegu stabala (ISO 11681-2:2011; EN ISO 11681-2:2011) |
EN ISO 11681-2:2011 |
Machinery for forestry – Portable chain-saw safety requirements and testing – Part 2: Chain-saws for tree service (ISO 11681-2:2011; EN ISO 11681-2:2011) |
366. |
HRN EN ISO 11688-1:2010 |
Akustika – Preporučena praksa za projektiranje strojeva i opreme s malom bukom – 1. dio: Planiranje (ISO/TR 11688-1:1995; EN ISO 11688-1:2009) |
EN ISO 11688-1:2009 |
Acoustics – Recommended practice for the design of low-noise machinery and equipment – Part 1: Planning (ISO/TR 11688-1:1995; EN ISO 11688-1:2009) |
367. |
HRN EN ISO 11691:2010 |
Akustika – Mjerenje unesenog prigušenja prigušivača u kanalima bez protoka – Laboratorijska pregledna metoda (ISO 11691:1995; EN ISO 11691:2009) |
EN ISO 11691:2009 |
Acoustics – Measurement of insertion loss of ducted silencers without flow – Laboratory survey method (ISO 11691:1995; EN ISO 11691:2009) |
368. |
HRN EN ISO 11806-1:2013 |
Poljoprivredna i šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje za prijenosne, ručno upravljane, motorne rezačice za grmlje i kosilice trave – 1. dio: Strojevi opremljeni motorom s unutrašnjim izgaranjem (ISO 11806-1:2011; EN ISO 11806-1:2011) |
EN ISO 11806-1:2011 |
Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011; EN ISO 11806-1:2011) |
369. |
HRN EN ISO 11806-2:2013 |
Poljoprivredna i šumarska mehanizacija – Sigurnosni zahtjevi i ispitivanje za prijenosne, ručno upravljane, motorne rezačice za grmlje i kosilice za travu – 2. dio: Strojevi opremljeni stražnjom pogonskom jedinicom (ISO 11806-2:2011; EN ISO 11806-2:2011) |
EN ISO 11806-2:2011 |
Agricultural and forestry machinery – Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers – Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011; EN ISO 11806-2:2011) |
370. |
HRN EN ISO 11850:2013 |
Šumarska mehanizacija – Opći sigurnosni zahtjevi (ISO 11850:2011; EN ISO 11850:2011) |
EN ISO 11850:2011 |
Machinery for forestry – General safety requirements (ISO 11850:2011; EN ISO 11850:2011) |
371. |
HRN EN ISO 11957:2010 |
Akustika – Određivanje zvučne izolacije kabina – Mjerenja u laboratoriju i in situ (ISO 11957:1996; EN ISO 11957:2009) |
EN ISO 11957:2009 |
Acoustics – Determination of sound insulation performance of cabins – Laboratory and in situ measurements (ISO 11957:1996; EN ISO 11957:2009) |
372. |
HRN EN 12001:2013 |
Strojevi za transport, prskanje i izlijevanje betona i žbuke – Sigurnosni zahtjevi (EN 12001:2012) |
EN 12001:2012 |
Conveying, spraying and placing machines for concrete and mortar – Safety requirements (EN 12001:2012) |
373. |
HRN EN 12012-1:2008 |
Strojevi za gumu i plastiku – Strojevi za usitnjavanje – 1. dio: Sigurnosni zahtjevi za granulatore sa noževima (EN 12012-1:2007+A1:2008) |
EN 12012-1:2007+A1:2008 |
Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators (EN 12012-1:2007+A1:2008) |
374. |
HRN EN 12012-3:2008 |
Strojevi za gumu i plastiku – Strojevi za usitnjavanje – 3. dio: Sigurnosni zahtjevi za drobljenje (EN 12012-3:2001+A1:2008) |
EN 12012-3:2001+A1:2008 |
Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders (EN 12012-3:2001+A1:2008) |
375. |
HRN EN 12012-4:2008 |
Strojevi za gumu i plastiku – Strojevi za usitnjavanje – 4. dio: Sigurnosni zahtjevi za drobilice (EN 12012-4:2006+A1:2008) |
EN 12012-4:2006+A1:2008 |
Plastics and rubber machines – Size reduction machines – Part 4: Safety requirements for agglomerators (EN 12012-4:2006+A1:2008) |
376. |
HRN EN 12013:2008 |
Strojevi za gumu i plastiku – Unutrašnje mješalice – Sigurnosni zahtjevi (EN 12013:2000+A1:2008) |
EN 12013:2000+A1:2008 |
Plastics and rubber machines – Internal mixers – Safety requirements (EN 12013:2000+A1:2008) |
377. |
HRN EN 12016:2013 |
Elektromagnetska kompatibilnost – Norma porodice proizvoda za dizala, pokretne stube i pokretne trake – Otpornost (EN 12016:2013) |
EN 12016:2013 |
Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity (EN 12016:2013) |
378. |
HRN EN 12041:2009 |
Strojevi za preradu hrane – Strojevi za oblikovanje – Sigurnosni i higijenski zahtjevi (EN 12041:2000+A1:2009) |
EN 12041:2000+A1:2009 |
Food processing machinery – Moulders – Safety and hygiene requirements (EN 12041:2000+A1:2009) |
379. |
HRN EN 12042:2010 |
Strojevi za preradu hrane – Automatski odjeljivači – Sigurnosni i higijenski zahtjevi (EN 12042:2005+A1:2010) |
EN 12042:2005+A1:2010 |
Food processing machinery – Automatic dividers – Safety and hygiene requirements (EN 12042:2005+A1:2010) |
380. |
HRN EN 12043:2010 |
Strojevi za preradu hrane – Ispitivači sredine – Sigurnosni i higijenski zahtjevi (EN 12043:2000+A1:2010) |
EN 12043:2000+A1:2010 |
Food processing machinery – Intermediate provers – Safety and hygiene requirements (EN 12043:2000+A1:2010) |
381. |
HRN EN 12044:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Strojevi za rezanje i probijanje – Sigurnosni zahtjevi (EN 12044:2005+A1:2009) |
EN 12044:2005+A1:2009 |
Footwear, leather and imitation leather goods manufacturing machines – Cutting and punching machines – Safety requirements (EN 12044:2005+A1:2009) |
382. |
HRN EN 12053:2008 |
Sigurnost industrijskih kamiona – Ispitne metode za mjerenje emisije buke (EN 12053:2001+A1:2008) |
EN 12053:2001+A1:2008 |
Safety of industrial trucks – Test methods for measuring noise emissions (EN 12053:2001+A1:2008) |
383. |
HRN EN 12077-2:2008 |
Sigurnost granika – Zahtjevi za zdravlje i sigurnost – 2. dio: Graničnici i pokazni uređaji (EN 12077-2:1998+A1:2008) |
EN 12077-2:1998+A1:2008 |
Cranes safety – Requirements for health and safety – Part 2: Limiting and indicating devices (EN 12077-2:1998+A1:2008) |
384. |
HRN EN ISO 12100:2011 |
Sigurnost strojeva – Opća načela za projektiranje – Procjena i smanjivanje rizika (ISO 12100:2010; EN ISO 12100:2010) |
EN ISO 12100:2010 |
Safety of machinery – General principles for design – Risk assessment and risk reduction (ISO 12100:2010; EN ISO 12100:2010) |
385. |
HRN EN 12110:2009 |
Strojevi za gradnju tunela – Zračne brane – Sigurnosni zahtjevi (EN 12110:2002+A1:2008) |
EN 12110:2002+A1:2008 |
Tunnelling machines – Air locks – Safety requirements (EN 12110:2002+A1:2008) |
386. |
HRN EN 12111:2009 |
Strojevi za gradnju tunela – Rovokopači, mineri s neprekidnim djelovanjem i udarni riperi – Sigurnosni zahtjevi (EN 12111:2002+A1:2009) |
EN 12111:2002+A1:2009 |
Tunnelling machines – Road headers, continuous miners and impact rippers – Safety requirements (EN 12111:2002+A1:2009) |
387. |
HRN EN 12158-1:2010 |
Građevna dizala za transport materijala – 1. dio: Dizala s dozvoljenim pristupom na platformu (EN 12158-1:2000+A1:2010) |
EN 12158-1:2000+A1:2010 |
Builders’ hoists for goods – Part 1: Hoists with accessible platforms (EN 12158-1:2000+A1:2010) |
388. |
HRN EN 12158-2:2010 |
Građevna dizala za transport materijala – 2. dio: Kosa dizala s nedozvoljenim pristupom na platformu (EN 12158-2:2000+A1:2010) |
EN 12158-2:2000+A1:2010 |
Builders’ hoists for goods – Part 2: Inclined hoists with non-accessible load carrying devices (EN 12158-2:2000+A1:2010) |
389. |
HRN EN 12159:2013 |
Građevna dizala za prijevoz osoba i materijala s okomito vođenom voznom košarom (EN 12159:2012) |
EN 12159:2012 |
Builders hoists for persons and materials with vertically guided cages (EN 12159:2012) |
390. |
HRN EN 12162:2009 |
Pumpe za kapljevine – Sigurnosni zahtjevi – Postupak hidrostatičkoga ispitivanja (EN 12162:2001+A1:2009) |
EN 12162:2001+A1:2009 |
Liquid pumps – Safety requirements – Procedure for hydrostatic testing (EN 12162:2001+A1:2009) |
391. |
HRN EN 12198-1:2008 |
Sigurnost strojeva – Procjena i smanjenje opasnosti nastalih od zračenja koja ispuštaju strojevi – 1. dio: Opća načela (EN 12198-1:2000+A1:2008) |
EN 12198-1:2000+A1:2008 |
Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 1: General principles (EN 12198-1:2000+A1:2008) |
392. |
HRN EN 12198-2:2008 |
Sigurnost strojeva – Procjena i smanjenje opasnosti nastalih od zračenja koja ispuštaju strojevi – 2. dio: Postupak mjerenja ispuštenog zračenja (EN 12198-2:2002+A1:2008) |
EN 12198-2:2002+A1:2008 |
Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 2: Radiation emission measurement procedure (EN 12198-2:2002+A1:2008) |
393. |
HRN EN 12198-3:2008 |
Sigurnost strojeva – Procjena i smanjenje opasnosti nastalih od zračenja koja ispuštaju strojevi – 3. dio: Smanjenje zračenja slabljenjem ili zaslanjanjem (EN 12198-3:2002+A1:2008) |
EN 12198-3:2002+A1:2008 |
Safety of machinery – Assessment and reduction of risks arising from radiation emitted by machinery – Part 3: Reduction of radiation by attenuation or screening (EN 12198-3:2002+A1:2008) |
394. |
HRN EN 12203:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Tijesci za cipele i kožu – Sigurnosni zahtjevi (EN 12203:2003+A1:2009) |
EN 12203:2003+A1:2009 |
Footwear, leather and imitation leather goods manufacturing machines – Shoe and leather presses – Safety requirements (EN 12203:2003+A1:2009) |
395. |
HRN EN 12254:2011 |
Zasloni za radna mjesta s laserom – Sigurnosni zahtjevi i ispitivanje (EN 12254:2010) |
EN 12254:2010 |
Screens for laser working places – Safety requirements and testing (EN 12254:2010) |
396. |
HRN EN 12254:2011/Ispr.1:2013 |
Zasloni za radna mjesta s laserom – Sigurnosni zahtjevi i ispitivanje (EN 12254:2010/AC:2011) |
EN 12254:2010/AC:2011 |
Screens for laser working places – Safety requirements and testing (EN 12254:2010/AC:2011) |
397. |
HRN EN 12267:2010 |
Strojevi za preradu hrane – Strojevi s kružnom pilom – Sigurnosni i higijenski zahtjevi (EN 12267:2003+A1:2010) |
EN 12267:2003+A1:2010 |
Food processing machinery – Circular saw machines – Safety and hygiene requirements (EN 12267:2003+A1:2010) |
398. |
HRN EN 12268:2010 |
Strojevi za preradu hrane – Strojevi s tračnim pilama – Sigurnosni i higijenski zahtjevi (EN 12268:2003+A1:2010) |
EN 12268:2003+A1:2010 |
Food processing machinery – Band saw machines – Safety and hygiene requirements (EN 12268:2003+A1:2010) |
399. |
HRN EN 12301:2008 |
Strojevi za gumu i plastiku – Strojevi za izradu folija – Sigurnosni zahtjevi (EN 12301:2000+A1:2008) |
EN 12301:2000+A1:2008 |
Plastics and rubber machines – Calenders – Safety requirements (EN 12301:2000+A1:2008) |
400. |
HRN EN 12312-1:2013 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 1. dio: Stepenice za putnike (EN 12312-1:2013) |
EN 12312-1:2013 |
Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs (EN 12312-1:2013) |
401. |
HRN EN 12312-2:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 2. dio: Vozilo za catering (EN 12312-2:2002+A1:2009) |
EN 12312-2:2002+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 2: Catering vehicles (EN 12312-2:2002+A1:2009) |
402. |
HRN EN 12312-3:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 3. dio: Vozilo za konvejerske pojaseve (EN 12312-3:2003+A1:2009) |
EN 12312-3:2003+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 3: Conveyor belt vehicles (EN 12312-3:2003+A1:2009) |
403. |
HRN EN 12312-4:2014 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 4. dio: Mostovi za ukrcaj putnika (EN 12312-4:2014) |
EN 12312-4:2014 |
Aircraft ground support equipment – Specific requirements – Part 4: Passenger boarding bridges (EN 12312-4:2014) |
404. |
HRN EN 12312-5:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 5. dio: Zrakoplovna oprema za točenje goriva (EN 12312-5:2005+A1:2009) |
EN 12312-5:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment (EN 12312-5:2005+A1:2009) |
405. |
HRN EN 12312-6:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 6. dio: Skidanje leda i skidači leda / protuledna oprema (EN 12312-6:2004+A1:2009) |
EN 12312-6:2004+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 6: Deicers and deicing/antiicing equipment (EN 12312-6:2004+A1:2009) |
406. |
HRN EN 12312-7:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 7. dio: Oprema za pomicanje zrakoplova (EN 12312-7:2005+A1:2009) |
EN 12312-7:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 7: Air-craft movement equipment (EN 12312-7:2005+A1:2009) |
407. |
HRN EN 12312-8:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 8. dio: Održavanje stepenica i platforma (EN 12312-8:2005+A1:2009) |
EN 12312-8:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms (EN 12312-8:2005+A1:2009) |
408. |
HRN EN 12312-9:2013 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 9. dio: Utovarivači spremnika/paleta (EN 12312-9:2013) |
EN 12312-9:2013 |
Aircraft ground support equipment – Specific requirements – Part 9: Container/Pallet loaders (EN 12312-9:2013) |
409. |
HRN EN 12312-10:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 10. dio: Transporteri za prijevoz spremnika/paleta (EN 12312-10:2005+A1:2009) |
EN 12312-10:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 10: Container/Pallet transfer transporters (EN 12312-10:2005+A1:2009) |
410. |
HRN EN 12312-12:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 12. dio: Oprema za opskrbu pitkom vodom (EN 12312-12:2002+A1:2009) |
EN 12312-12:2002+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 12: Potable water service equipment (EN 12312-12:2002+A1:2009) |
411. |
HRN EN 12312-13:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 13. dio: Oprema za opskrbu sanitarnom vodom (EN 12312-13:2002+A1:2009) |
EN 12312-13:2002+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 13: Lavatory service equipment (EN 12312-13:2002+A1:2009) |
412. |
HRN EN 12312-14:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 14. dio: Isključena/onesposebljena vozila za ukrcaj putnika (EN 12312-14:2006+A1:2009) |
EN 12312-14:2006+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 14: Disabled/incapacitated passenger boarding vehicles (EN 12312-14:2006+A1:2009) |
413. |
HRN EN 12312-15:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 15. dio: Traktori za prtljagu i opremu (EN 12312-15:2006+A1:2009) |
EN 12312-15:2006+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors (EN 12312-15:2006+A1:2009) |
414. |
HRN EN 12312-16:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 16. dio: Oprema za zračni start (EN 12312-16:2005+A1:2009) |
EN 12312-16:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 16: Air start equipment (EN 12312-16:2005+A1:2009) |
415. |
HRN EN 12312-17:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 17. dio: Oprema za pripremu zraka (EN 12312-17:2004+A1:2009) |
EN 12312-17:2004+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 17: Air conditioning equipment (EN 12312-17:2004+A1:2009) |
416. |
HRN EN 12312-18:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 18. dio: Jedinice za dušik i kisik (EN 12312-18:2005+A1:2009) |
EN 12312-18:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 18: Nitrogen or Oxygen units (EN 12312-18:2005+A1:2009) |
417. |
HRN EN 12312-19:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 19. dio: Zrakoplovne dizalice, dizalice osovine i hidraulični pridržavač repa (EN 12312-19:2005+A1:2009) |
EN 12312-19:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions (EN 12312-19:2005+A1:2009) |
418. |
HRN EN 12312-20:2010 |
Oprema za zemaljsku podršku zrakoplovu – Posebni zahtjevi – 20. dio: Zemaljske jedinice s električnom snagom (EN 12312-20:2005+A1:2009) |
EN 12312-20:2005+A1:2009 |
Aircraft ground support equipment – Specific requirements – Part 20: Electrical ground power units (EN 12312-20:2005+A1:2009) |
419. |
HRN EN 12321:2010 |
Strojevi za podzemne rudnike – Specifikacija sigurnosnih zahtjeva za oklopljene grabljare širokog čela (EN 12321:2003+A1:2009) |
EN 12321:2003+A1:2009 |
Underground mining machinery – Specification for the safety requirements of armoured face conveyors (EN 12321:2003+A1:2009) |
420. |
HRN EN 12331:2010 |
Strojevi za preradu hrane – Strojevi za mljevenje – Sigurnosni i higijenski zahtjevi (EN 12331:2003+A2:2010) |
EN 12331:2003+A2:2010 |
Food processing machinery – Mincing machines – Safety and hygiene requirements (EN 12331:2003+A2:2010) |
421. |
HRN EN 12336:2009 |
Strojevi za gradnju tunela – Strojevi sa štitom, udarne bušilice, bušilice sa svrdlom, oprema za montažu obloge tunela – Sigurnosni zahtjevi (EN 12336:2005+A1:2008) |
EN 12336:2005+A1:2008 |
Tunnelling machines – Shield machines, thrust boring machines, auger boring machines, lining erection equipment – Safety requirements (EN 12336:2005+A1:2008) |
422. |
HRN EN 12348:2009 |
Temeljne bušilice na postolju – Sigurnost (EN 12348:2000+A1:2009) |
EN 12348:2000+A1:2009 |
Core drilling machines on stand – Safety (EN 12348:2000+A1:2009) |
423. |
HRN EN 12355:2010 |
Strojevi za preradu hrane – Strojevi za odvajanje/ljuštenje kože i odvajanje mesnog dijela – Sigurnosni i higijenski zahtjevi (EN 12355:2003+A1:2010) |
EN 12355:2003+A1:2010 |
Food processing machinery – Derinding-, skinning– and membrane removal machines – Safety and hygiene requirements (EN 12355:2003+A1:2010) |
424. |
HRN EN 12385-1:2008 |
Čelična užad – Sigurnost – 1. dio: Opći zahtjevi (EN 12385-1:2002+A1:2008) |
EN 12385-1:2002+A1:2008 |
Steel wire ropes – Safety – Part 1: General requirements (EN 12385-1:2002+A1:2008) |
425. |
HRN EN 12385-2:2008 |
Čelična užad – Sigurnost – 2. dio: Definicije, označivanje i razredba (EN 12385-2:2002+A1:2008) |
EN 12385-2:2002+A1:2008 |
Steel wire ropes – Safety – Part 2: Definitions, designation and classification (EN 12385-2:2002+A1:2008) |
426. |
HRN EN 12385-3:2008 |
Čelična užad – Sigurnost – 3. dio: Upute za uporabu i održavanje (EN 12385-3:2004+A1:2008) |
EN 12385-3:2004+A1:2008 |
Steel wire ropes – Safety – Part 3: Information for use and maintenance (EN 12385-3:2004+A1:2008) |
427. |
HRN EN 12385-4:2008 |
Čelična užad – Sigurnost – 4. dio: Pramenasta užad za opću primjenu (EN 12385-4:2002+A1:2008) |
EN 12385-4:2002+A1:2008 |
Steel wire ropes – Safety – Part 4: Stranded ropes for general lifting applications (EN 12385-4:2002+A1:2008) |
428. |
HRN EN 12385-10:2008 |
Čelična užad – Sigurnost – 10. dio: Spiralna užad za opću primjenu (EN 12385-10:2003+A1:2008) |
EN 12385-10:2003+A1:2008 |
Steel wire ropes – Safety – Part 10: Spiral ropes for general structural applications (EN 12385-10:2003+A1:2008) |
429. |
HRN EN 12387:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Modularna oprema (normirani kalupi – sklopovi) za popravak obuće – Sigurnosni zahtjevi (EN 12387:2005+A1:2009) |
EN 12387:2005+A1:2009 |
Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements (EN 12387:2005+A1:2009) |
430. |
HRN EN 12409:2012 |
Strojevi za gumu i plastiku – Strojevi za termičko oblikovanje folija – Sigurnosni zahtjevi (EN 12409:2008+A1:2011) |
EN 12409:2008+A1:2011 |
Plastics and rubber machines – Thermoforming machines – Safety requirements (EN 12409:2008+A1:2011) |
431. |
HRN EN 12417:2009 |
Alatni strojevi – Sigurnost – Obradni centri (EN 12417:2001+A2:2009) |
EN 12417:2001+A2:2009 |
Machine tools – Safety – Machining centres (EN 12417:2001+A2:2009) |
432. |
HRN EN 12417:2009/Ispr.1:2012 |
Alatni strojevi – Sigurnost – Obradni centri (EN 12417:2001+A2:2009/AC:2010) |
EN 12417:2001+A2:2009/AC:2010 |
Machine tools – Safety – Machining centres (EN 12417:2001+A2:2009/AC:2010) |
433. |
HRN EN 12418:2009 |
Strojevi za rezanje kamena i elemenata za zidanje na gradilištu – Sigurnost (EN 12418:2000+A1:2009) |
EN 12418:2000+A1:2009 |
Masonry and stone cutting-off machines for job site – Safety (EN 12418:2000+A1:2009) |
434. |
HRN EN 12463:2011 |
Strojevi za preradu hrane – Strojevi za punjenje i pomoćni strojevi – Sigurnosni i higijenski zahtjevi (EN 12463:2004+A1:2011) |
EN 12463:2004+A1:2011 |
Food processing machinery – Filling machines and auxiliary machines – Safety and hygiene requirements (EN 12463:2004+A1:2011) |
435. |
HRN EN 12505:2010 |
Strojevi za preradu hrane – Centrifugalni strojevi za odvajanje (proizvodnju) jestivih ulja i masti – Sigurnosni i higijenski zahtjevi (EN 12505:2000+A1:2009) |
EN 12505:2000+A1:2009 |
Food processing machinery – Centrifugal machines for processing edible oils and fats – Safety and hygiene requirements (EN 12505:2000+A1:2009) |
436. |
HRN EN 12525:2010 |
Poljoprivredna mehanizacija – Čeoni utovarivači – Sigurnost (EN 12525:2000+A2:2010) |
EN 12525:2000+A2:2010 |
Agricultural machinery – Front loaders – Safety (EN 12525:2000+A2:2010) |
437. |
HRN EN 12545:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Pravilo za mjerenje buke – Opći zahtjevi (EN 12545:2000+A1:2009) |
EN 12545:2000+A1:2009 |
Footwear, leather and imitation leather goods manufacturing machines – Noise test code – Common requirements (EN 12545:2000+A1:2009) |
438. |
HRN EN 12547:2010 |
Centrifuge – Opći sigurnosni zahtjevi (EN 12547:1999+A1:2009) |
EN 12547:1999+A1:2009 |
Centrifuges – Common safety requirements (EN 12547:1999+A1:2009) |
439. |
HRN EN 12549:2008 |
Akustika – Kod za ispitivanje buke za alate (»pištolje«) za spajanje zabijanjem – Inženjerska metoda (EN 12549:1999+A1:2008) |
EN 12549:1999+A1:2008 |
Acoustics – Noise test code for fastener driving tools – Engineering method (EN 12549:1999+A1:2008) |
440. |
HRN EN 12581:2010 |
Postrojenja za premazivanje – Strojevi za premazivanje umakanjem i elektronanošenjem organskih premaznih materijala – Sigurnosni zahtjevi (EN 12581:2005+A1:2010) |
EN 12581:2005+A1:2010 |
Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements (EN 12581:2005+A1:2010) |
441. |
HRN EN 12601:2013 |
Generator pogonjen klipnim motorom s unutrašnjim izgaranjem – Sigurnost (EN 12601:2010) |
EN 12601:2010 |
Reciprocating internal combustion engine driven generating sets – Safety (EN 12601:2010) |
442. |
HRN EN 12621:2010 |
Strojevi za dopremu i protok materijala za nanošenje pod tlakom – Sigurnosni zahtjevi (EN 12621:2006+A1:2010) |
EN 12621:2006+A1:2010 |
Machinery for the supply and circulation of coating materials under pressure – Safety requirements (EN 12621:2006+A1:2010) |
443. |
HRN EN 12622:2014 |
Sigurnost alatnih strojeva – Hidraulične preše (tijesci) za kutno savijanje (EN 12622:2009+A1:2013) |
EN 12622:2009+A1:2013 |
Safety of machine tools – Hydraulic press brakes (EN 12622:2009+A1:2013) |
444. |
HRN EN 12629-1:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 1. dio: Opći zahtjevi (EN 12629-1:2000+A1:2010) |
EN 12629-1:2000+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 1: Common requirements (EN 12629-1:2000+A1:2010) |
445. |
HRN EN 12629-2:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 2. dio: Strojevi za izradu blokova (EN 12629-2:2002+A1:2010) |
EN 12629-2:2002+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 2: Block making machines (EN 12629-2:2002+A1:2010) |
446. |
HRN EN 12629-3:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 3. dio: Strojevi s kliznom i okretnom pločom (EN 12629-3:2002+A1:2010) |
EN 12629-3:2002+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 3: Slide and turntable machines (EN 12629-3:2002+A1:2010) |
447. |
HRN EN 12629-4:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 4. dio: Strojevi za izradu betonskih krovnih ploča (EN 12629-4:2001+A1:2010) |
EN 12629-4:2001+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 4: Concrete roof tile making machines (EN 12629-4:2001+A1:2010) |
448. |
HRN EN 12629-5-1:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – Dio 5-1: Strojevi za izradu cijevi u smjeru vertikalne osi (EN 12629-5-1:2003+A1:2010) |
EN 12629-5-1:2003+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-1: Pipe making machines manufacturing in the vertical axis (EN 12629-5-1:2003+A1:2010) |
449. |
HRN EN 12629-5-2:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – Dio 5-2: Strojevi za izradu cijevi u smjeru horizontalne osi (EN 12629-5-2:2003+A1:2010) |
EN 12629-5-2:2003+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-2: Pipe making machines manufacturing in the horizontal axis (EN 12629-5-2:2003+A1:2010) |
450. |
HRN EN 12629-5-3:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – Dio 5-3: Strojevi za izradu prednapetih cijevi (EN 12629-5-3:2003+A1:2010) |
EN 12629-5-3:2003+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-3: Pipe prestressing machines (EN 12629-5-3:2003+A1:2010) |
451. |
HRN EN 12629-5-4:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – Dio 5-4: Strojevi za izradu cijevi s betonskim prevlakama (EN 12629-5-4:2003+A1:2010) |
EN 12629-5-4:2003+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 5-4: Concrete pipe coating machines (EN 12629-5-4:2003+A1:2010) |
452. |
HRN EN 12629-6:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 6. dio: Pokretna i nepokretna oprema za izradu predgotovljenih armiranih proizvoda (EN 12629-6:2004+A1:2010) |
EN 12629-6:2004+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products (EN 12629-6:2004+A1:2010) |
453. |
HRN EN 12629-7:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 7. dio: Pokretna i nepokretna oprema za izradu prednapetih proizvoda (EN 12629-7:2004+A1:2010) |
EN 12629-7:2004+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 7: Stationary and mobile equipment for long line manufacture of prestressed products (EN 12629-7:2004+A1:2010) |
454. |
HRN EN 12629-8:2011 |
Strojevi za izradu građevnih proizvoda od betona i kalcijevog silikata – Sigurnost – 8. dio: Strojevi i oprema za izradu građevnih proizvoda od kalcijevog silikata (i betona) (EN 12629-8:2002+A1:2010) |
EN 12629-8:2002+A1:2010 |
Machines for the manufacture of constructional products from concrete and calcium-silicate – Safety – Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) (EN 12629-8:2002+A1:2010) |
455. |
HRN EN 12635:2008 |
Industrijska, komercijalna, garažna i ostala ulazna vrata – Ugradnja i upotreba (EN 12635:2002+A1:2008) |
EN 12635:2002+A1:2008 |
Industrial, commercial and garage doors and gates – Installation and use (EN 12635:2002+A1:2008) |
456. |
HRN EN 12643:2014 |
Strojevi za zemljane radove – Strojevi s gumenim kotačima – Zahtjevi za upravljanje (ISO 5010:1992, MOD; EN 12643:2014) |
EN 12643:2014 |
Earth-moving machinery – Rubber-tyred machines – Steering requirements (ISO 5010:1992, MOD; EN 12643:2014) |
457. |
HRN EN 12644-1:2008 |
Granici – Informacije za uporabu i ispitivanje – 1. dio: Upute (EN 12644-1:2001+A1:2008) |
EN 12644-1:2001+A1:2008 |
Cranes – Information for use and testing – Part 1: Instructions (EN 12644-1:2001+A1:2008) |
458. |
HRN EN 12644-2:2008 |
Granici – Informacije za uporabu i ispitivanje – 2. dio: Obilježavanje (EN 12644-2:2000+A1:2008) |
EN 12644-2:2000+A1:2008 |
Cranes – Information for use and testing – Part 2: Marking (EN 12644-2:2000+A1:2008) |
459. |
HRN EN 12649:2011 |
Strojevi za zbijanje i poravnavanje betona – Sigurnost (EN 12649:2008+A1:2011) |
EN 12649:2008+A1:2011 |
Concrete compactors and smoothing machines – Safety (EN 12649:2008+A1:2011) |
460. |
HRN EN 12653:2010 |
Strojevi za proizvodnju obuće i proizvoda od kože i umjetne kože – Strojevi za pričvršćivanje – Sigurnosni zahtjevi (EN 12653:1999+A2:2009) |
EN 12653:1999+A2:2009 |
Footwear, leather and imitation leather manufacturing machines – Nailing machines – Safety requirements (EN 12653:1999+A2:2009) |
461. |
HRN EN 12693:2008 |
Rashladni sustavi i dizalice topline – Zahtjevi s obzirom na okoliš i sigurnost – Volumetrijski rashladni kompresori (EN 12693:2008) |
EN 12693:2008 |
Refrigerating systems and heat pumps – Safety and environmental requirements – Positive displacement refrigerant compressors (EN 12693:2008) |
462. |
HRN EN 12717:2009 |
Sigurnost alatnih strojeva – Bušilice (EN 12717:2001+A1:2009) |
EN 12717:2001+A1:2009 |
Safety of machine tools – Drilling machines (EN 12717:2001+A1:2009) |
463. |
HRN EN 12733:2010 |
Poljoprivredna i šumarska mehanizacija – Ručno upravljane motorne kosilice – Sigurnost (EN 12733:2001+A1:2009) |
EN 12733:2001+A1:2009 |
Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety (EN 12733:2001+A1:2009) |
464. |
HRN EN 12750:2013 |
Sigurnost strojeva za obradu drva – Četverostrani stroj za kalupiranje (EN 12750:2013) |
EN 12750:2013 |
Safety of woodworking machines – Four sided moulding machines (EN 12750:2013) |
465. |
HRN EN 12753:2010 |
Sustav za toplinsko čišćenje ispušnog plina s opreme za površinsku obradu – Sigurnosni zahtjevi (EN 12753:2005+A1:2010) |
EN 12753:2005+A1:2010 |
Thermal cleaning systems for exhaust gas from surface treatment equipment – Safety requirements (EN 12753:2005+A1:2010) |
466. |
HRN EN 12757-1:2010 |
Strojevi za miješanje materijala za prevlačenje – Sigurnosni zahtjevi – 1. dio: Strojevi za miješanje za uporabu pri obnovi vozila (EN 12757-1:2005+A1:2010) |
EN 12757-1:2005+A1:2010 |
Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing (EN 12757-1:2005+A1:2010) |
467. |
HRN EN 12779:2010 |
Sigurnost strojeva za obradu drva – Sustav za odvajanje ljuski i prašine s učvršćenom instalacijom – Značajke koje se odnose na sigurnost i sigurnosni zahtjevi (EN 12779:2004+A1:2009) |
EN 12779:2004+A1:2009 |
Safety of woodworking machines – Chip and dust extraction systems with fixed installation – Safety related performances and safety requirements (EN 12779:2004+A1:2009) |
468. |
HRN EN 12786:2013 |
Sigurnost strojeva – Zahtjevi za pisanje vibracijskih odredaba u sigurnosnim normama (EN 12786:2013) |
EN 12786:2013 |
Safety of machinery – Requirements for the drafting of the vibration clauses of safety standards (EN 12786:2013) |
469. |
HRN EN 12851:2010 |
Strojevi za preradu hrane – Priključci za dobavljanje hrane na strojevima sa pomoćnim pogonom – Sigurnosni i higijenski zahtjevi (EN 12851:2005+A1:2010) |
EN 12851:2005+A1:2010 |
Food processing machinery – Catering attachments for machines having an auxiliary drive hub – Safety and hygiene requirements (EN 12851:2005+A1:2010) |
470. |
HRN EN 12852:2010 |
Strojevi za preradu hrane – Prerađivači hrane i miješalice – Sigurnosni i higijenski zahtjevi (EN 12852:2001+A1:2010) |
EN 12852:2001+A1:2010 |
Food processing machinery – Food processors and blenders – Safety and hygiene requirements (EN 12852:2001+A1:2010) |
471. |
HRN EN 12853:2010 |
Strojevi za preradu hrane – Ručne mješalice i pjenjače – Sigurnosni i higijenski zahtjevi (EN 12853:2001+A1:2010) |
EN 12853:2001+A1:2010 |
Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements (EN 12853:2001+A1:2010) |
472. |
HRN EN 12853:2010/Ispr.1:2011 |
Strojevi za preradu hrane – Ručne mješalice i pjenjače – Sigurnosni i higijenski zahtjevi (EN 12853:2001+A1:2010/AC:2010) |
EN 12853:2001+A1:2010/AC:2010 |
Food processing machinery – Hand-held blenders and whisks – Safety and hygiene requirements (EN 12853:2001+A1:2010/AC:2010) |
473. |
HRN EN 12854:2010 |
Strojevi za preradu hrane – Konzolne miješalice – Sigurnosni i higijenski zahtjevi (EN 12854:2003+A1:2010) |
EN 12854:2003+A1:2010 |
Food processing machinery – Beam mixers – Safety and hygiene requirements (EN 12854:2003+A1:2010) |
474. |
HRN EN 12855:2010 |
Strojevi za preradu hrane – Rezači s rotirajućom posudom – Sigurnosni i higijenski zahtjevi (EN 12855:2003+A1:2010) |
EN 12855:2003+A1:2010 |
Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements (EN 12855:2003+A1:2010) |
475. |
HRN EN 12881-1:2008 |
Transportne trake – Ispitivanje zapaljivosti simulacijom požara – 1. dio: Ispitivanje propan plamenikom (EN 12881-1:2005+A1:2008) |
EN 12881-1:2005+A1:2008 |
Conveyor belts – Fire simulation flammability testing – Part 1: Propane burner tests (EN 12881-1:2005+A1:2008) |
476. |
HRN EN 12881-2:2008 |
Transportne trake – Ispitivanje zapaljivosti simulacijom požara – 2. dio: Ispitivanje za požare velikih razmjera (EN 12881-2:2005+A1:2008) |
EN 12881-2:2005+A1:2008 |
Conveyor belts – Fire simulation flammability testing – Part 2: Large scale fire test (EN 12881-2:2005+A1:2008) |
477. |
HRN EN 12882:2009 |
Transportne trake za opću upotrebu – Sigurnosni zahtjevi s obzirom na struju i zapaljivost (EN 12882:2008) |
EN 12882:2008 |
Conveyor belts for general purpose use – Electrical and flammability safety requirements (EN 12882:2008) |
478. |
HRN EN 12921-1:2010 |
Strojevi za čišćenje i predobradbu površina industrijskih dijelova primjenom tekućina ili para – 1. dio: Opći sigurnosni zahtjevi (EN 12921-1:2005+A1:2010) |
EN 12921-1:2005+A1:2010 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 1: Common safety requirements (EN 12921-1:2005+A1:2010) |
479. |
HRN EN 12921-2:2009 |
Strojevi za čišćenje površina i predobradbu industrijskih dijelova primjenom tekućina ili para – 2. dio: Sigurnost strojeva kod kojih se primjenjuju tekućine za čišćenje na osnovi vode (EN 12921-2:2005+A1:2008) |
EN 12921-2:2005+A1:2008 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 2: Safety of machines using water based cleaning liquids (EN 12921-2:2005+A1:2008) |
480. |
HRN EN 12921-3:2009 |
Strojevi za čišćenje površina i predobradbu industrijskih dijelova primjenom tekućina ili para – 3. dio: Sigurnost strojeva kod kojih se primjenjuju zapaljive tekućine za čišćenje (EN 12921-3:2005+A1:2008) |
EN 12921-3:2005+A1:2008 |
Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours – Part 3: Safety of machines using flammable cleaning liquids (EN 12921-3:2005+A1:2008) |
481. |
HRN EN 12921-4:2009 |
Strojevi za čišćenje površina i predobradbu industrijskih dijelova primjenom tekućina ili para – 4. dio: Sigurnost strojeva kod kojih se primjenjuju halogenizirana otapala (EN 12921-4:2005+A1:2008) |
EN 12921-4:2005+A1:2008 |
Machines for surface cleaning and pretreatment of industrial items using liquids or vapours – Part 4: Safety of machines using halogenated solvents (EN 12921-4:2005+A1:2008) |
482. |
HRN EN 12965:2010 |
Traktori i poljoprivredna i šumarska mehanizacija – Štitnici vratila za prijenos snage s traktora na strojeve i oruđa – Sigurnost (EN 12965:2003+A2:2009) |
EN 12965:2003+A2:2009 |
Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety (EN 12965:2003+A2:2009) |
483. |
HRN EN 12978:2010 |
Industrijska, komercijalna, garažna i ostala ulazna vrata – Sigurnosne naprave za strojno pogonjena vrata i kolne ulaze – Zahtjevi i metode ispitivanja (EN 12978:2003+A1:2009) |
EN 12978:2003+A1:2009 |
Industrial, commercial and garage doors and gates – Safety devices for power operated doors and gates – Requirements and test methods (EN 12978:2003+A1:2009) |
484. |
HRN EN 12981:2009 |
Postrojenje za prevlačenje – Komore za naštrcavanje kada se primjenjuju organski praškasti materijali za prevlačenje – Sigurnosni zahtjevi (EN 12981:2005+A1:2009) |
EN 12981:2005+A1:2009 |
Coating plants – Spray booths for application of organic powder coating material – Safety requirements (EN 12981:2005+A1:2009) |
485. |
HRN EN 12984:2010 |
Strojevi za preradu hrane – Prenosivi i/ili ručno upravljani strojevi i uređaji opremljeni mehanički pogonjenim reznim alatom – Sigurnosni i higijenski zahtjevi (EN 12984:2005+A1:2010) |
EN 12984:2005+A1:2010 |
Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements (EN 12984:2005+A1:2010) |
486. |
HRN EN 12999:2012 |
Granici – Pretovarni granici (EN 12999:2011+A1:2012) |
EN 12999:2011+A1:2012 |
Cranes – Loader cranes (EN 12999:2011+A1:2012) |
487. |
HRN EN 13000:2010 |
Granici – Mobilni granici (EN 13000:2010) |
EN 13000:2010 |
Cranes – Mobile cranes (EN 13000:2010) |
488. |
HRN EN 13000:2010/Ispr.1:2012 |
Granici – Mobilni granici (EN 13000:2010/AC:2010) |
EN 13000:2010/AC:2010 |
Cranes – Mobile cranes (EN 13000:2010/AC:2010) |
489. |
HRN EN 13001-1:2009 |
Granici – Opće projektiranje – 1. dio: Opća načela i zahtjevi (EN 13001-1:2004+A1:2009) |
EN 13001-1:2004+A1:2009 |
Cranes – General design – Part 1: General principles and requirements (EN 13001-1:2004+A1:2009) |
490. |
HRN EN 13001-1:2009/Ispr.1:2010 |
Granici – Opće projektiranje – 1. dio: Opća načela i zahtjevi (EN 13001-1:2004+A1:2009/AC:2009) |
EN 13001-1:2004+A1:2009/AC:2009 |
Cranes – General design – Part 1: General principles and requirements (EN 13001-1:2004+A1:2009/AC:2009) |
491. |
HRN EN 13001-2:2012 |
Sigurnost granika – Opće projektiranje – 2. dio: Djelovanje opterećenja (EN 13001-2:2011+AC:2012) |
EN 13001-2:2011 |
Crane safety – General design – Part 2: Load actions (EN 13001-2:2011+AC:2012) |
492. |
HRN EN 13001-3-1:2013 |
Granici – Opće projektiranje – Dio 3-1: Granična stanja i dokaz sigurnosti za čelične nosive konstrukcije (EN 13001-3-1:2012+A1:2013) |
EN 13001-3-1:2012+A1:2013 |
Cranes – General Design – Part 3-1: Limit States and proof competence of steel structure (EN 13001-3-1:2012+A1:2013) |
493. |
HRN EN 13015:2008 |
Održavanje dizala i pokretnih stuba – Pravila za izradu uputa za održavanje (EN 13015:2001+A1:2008) |
EN 13015:2001+A1:2008 |
Maintenance for lifts and escalators – Rules for maintenance instructions (EN 13015:2001+A1:2008) |
494. |
HRN EN 13019:2009 |
Strojevi za površinsko čišćenje cesta – Sigurnosni zahtjevi (EN 13019:2001+A1:2008) |
EN 13019:2001+A1:2008 |
Machines for road surface cleaning – Safety requirements (EN 13019:2001+A1:2008) |
495. |
HRN EN 13020:2011 |
Strojevi za površinsko tretiranje cesta – Sigurnosni zahtjevi (EN 13020:2004+A1:2010) |
EN 13020:2004+A1:2010 |
Road surface treatment machines – Safety requirements (EN 13020:2004+A1:2010) |
496. |
HRN EN 13021:2009 |
Strojevi za usluge zimskog održavanja cesta – Sigurnosni zahtjevi (EN 13021:2003+A1:2008) |
EN 13021:2003+A1:2008 |
Winter service machines – Safety requirements (EN 13021:2003+A1:2008) |
497. |
HRN EN 13023:2010 |
Metode mjerenja buke strojeva za tisak, obradu i proizvodnju papira te pomoćne opreme – Stupnjevi točnosti 2 i 3 (EN 13023:2003+A1:2010) |
EN 13023:2003+A1:2010 |
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment – Accuracy grades 2 and 3 (EN 13023:2003+A1:2010) |
498. |
HRN EN 13035-1:2008 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 1. dio: Skladištenje, rukovanje i prijevoz opreme u tvornici (EN 13035-1:2008) |
EN 13035-1:2008 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 1: Storage, handling and transportation equipment inside the factory (EN 13035-1:2008) |
499. |
HRN EN 13035-2:2008 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 2. dio: Skladištenje, rukovanje i prijevoz opreme izvan tvornice (EN 13035-2:2008) |
EN 13035-2:2008 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 2: Storage, handling and transportation equipment outside the factory (EN 13035-2:2008) |
500. |
HRN EN 13035-3:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 3. dio: Strojevi za rezanje (EN 13035-3:2003+A1:2009+AC:2010) |
EN 13035-3:2003+A1:2009 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 3: Cutting machines (EN 13035-3:2003+A1:2009+AC:2010) |
501. |
HRN EN 13035-4:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 4. dio: Nagibni stolovi (EN 13035-4:2003+A1:2009) |
EN 13035-4:2003+A1:2009 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 4: Tilting tables (EN 13035-4:2003+A1:2009) |
502. |
HRN EN 13035-5:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 5. dio: Strojevi i uređaji za slaganje i raslagivanje (EN 13035-5:2006+A1:2009) |
EN 13035-5:2006+A1:2009 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 5: Machines and installations for stacking and de-stacking (EN 13035-5:2006+A1:2009) |
503. |
HRN EN 13035-6:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 6. dio: Strojevi za lomljenje (EN 13035-6:2006+A1:2009) |
EN 13035-6:2006+A1:2009 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 6: Machines for break-out (EN 13035-6:2006+A1:2009) |
504. |
HRN EN 13035-7:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 7. dio: Strojevi za rezanje višeslojnog stakla (EN 13035-7:2006+A1:2009) |
EN 13035-7:2006+A1:2009 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 7: Cutting machines for laminated glass (EN 13035-7:2006+A1:2009) |
505. |
HRN EN 13035-9:2010 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 9. dio: Uređaji za pranje (EN 13035-9:2006+A1:2010) |
EN 13035-9:2006+A1:2010 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 9: Washing installations (EN 13035-9:2006+A1:2010) |
506. |
HRN EN 13035-11:2011 |
Strojevi i postrojenja za izradu, obradu i preradu ravnog stakla – Sigurnosni zahtjevi – 11. dio: Strojevi za bušenje (EN 13035-11:2006+A1:2010) |
EN 13035-11:2006+A1:2010 |
Machines and plants for the manufacture, treatment and processing of flat glass – Safety requirements – Part 11: Drilling machines (EN 13035-11:2006+A1:2010) |
507. |
HRN EN 13042-1:2010 |
Strojevi i postrojenja za izradu, obradu i preradu šupljeg stakla – Sigurnosni zahtjevi – 1. dio: Opskrbljivač otvora (rastaljenim staklom) (EN 13042-1:2007+A1:2009) |
EN 13042-1:2007+A1:2009 |
Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 1: Gob feeder (EN 13042-1:2007+A1:2009) |
508. |
HRN EN 13042-2:2009 |
Strojevi i postrojenja za izradu, obradu i preradu šupljeg stakla – Sigurnosni zahtjevi – 2. dio: Rukovanje strojevima za opskrbljivanje (EN 13042-2:2004+A1:2009) |
EN 13042-2:2004+A1:2009 |
Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 2: Handling machines for feeding (EN 13042-2:2004+A1:2009) |
509. |
HRN EN 13042-3:2009 |
Strojevi i postrojenja za izradu, obradu i preradu šupljeg stakla – Sigurnosni zahtjevi – 3. dio: IS strojevi (EN 13042-3:2007+A1:2009) |
EN 13042-3:2007+A1:2009 |
Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 3: IS machines (EN 13042-3:2007+A1:2009) |
510. |
HRN EN 13042-5:2009 |
Strojevi i postrojenja za izradu, obradu i preradu šupljeg stakla – Sigurnosni zahtjevi – 5. dio: Preše (EN 13042-5:2003+A1:2009) |
EN 13042-5:2003+A1:2009 |
Machines and plants for the manufacture, treatment and processing of hollow glass – Safety requirements – Part 5: Presses (EN 13042-5:2003+A1:2009) |
511. |
HRN EN 13059:2008 |
Sigurnost industrijskih kamiona – Ispitne metode za mjerenje vibracija (EN 13059:2002+A1:2008) |
EN 13059:2002+A1:2008 |
Safety of industrial trucks – Test methods for measuring vibration (EN 13059:2002+A1:2008) |
512. |
HRN EN 13102:2009 |
Keramički strojevi – Sigurnost – Utovar i istovar (keramičkih) pločica od fine gline (EN 13102:2005+A1:2008) |
EN 13102:2005+A1:2008 |
Ceramic machines – Safety – Loading and unloading of fine clay tiles (EN 13102:2005+A1:2008) |
513. |
HRN EN 13112:2010 |
Strojevi za štavljenje kože – Strojevi za struganje, obrezivanje i striženje – Sigurnosni zahtjevi (EN 13112:2002+A1:2009) |
EN 13112:2002+A1:2009 |
Tannery machines – Splitting and bandknife shearing machines – Safety requirements (EN 13112:2002+A1:2009) |
514. |
HRN EN 13113:2010 |
Strojevi za štavljenje kože – Strojevi s valjcima za premazivanje – Sigurnosni zahtjevi (EN 13113:2002+A1:2010) |
EN 13113:2002+A1:2010 |
Tannery machines – Roller coating machines – Safety requirements (EN 13113:2002+A1:2010) |
515. |
HRN EN 13114:2010 |
Strojevi za štavljenje kože – Rorirajuće procesne posude – Sigurnosni zahtjevi (EN 13114:2002+A1:2009) |
EN 13114:2002+A1:2009 |
Tannery machines – Rotating process vessels – Safety requirements (EN 13114:2002+A1:2009) |
516. |
HRN EN 13118:2010 |
Poljoprivredna mehanizacija – Oprema za skupljanje krumpira – Sigurnost (EN 13118:2000+A1:2009) |
EN 13118:2000+A1:2009 |
Agricultural machinery – Potato harvesting equipment – Safety (EN 13118:2000+A1:2009) |
517. |
HRN EN 13120:2014 |
Unutarnji zastori – Zahtjevi izvedbe uključujući sigurnost (EN 13120:2009+A1:2014) |
EN 13120:2009+A1:2014 |
Internal blinds – Performance requirements including safety (EN 13120:2009+A1:2014) |
518. |
HRN EN 13128:2009 |
Sigurnost alatnih strojeva – Glodalice (uključujući i bušilice) (EN 13128:2001+A2:2009) |
EN 13128:2001+A2:2009 |
Safety of machine tools – Milling machines (including boring machines) (EN 13128:2001+A2:2009) |
519. |
HRN EN 13128:2009/Ispr.1:2012 |
Sigurnost alatnih strojeva – Glodalice (uključujući i bušilice) (EN 13128:2001+A2:2009/AC:2010) |
EN 13128:2001+A2:2009/AC:2010 |
Safety of machine tools – Milling machines (including boring machines) (EN 13128:2001+A2:2009/AC:2010) |
520. |
HRN EN 13135:2013 |
Granici – Sigurnost – Projektiranje – Zahtjevi na opremu (EN 13135:2013) |
EN 13135:2013 |
Cranes – Safety – Design – Requirements for equipment (EN 13135:2013) |
521. |
HRN EN 13140:2010 |
Poljoprivredna mehanizacija – Oprema za žetvu šećerne i stočne repe – Sigurnost (EN 13140:2000+A1:2009) |
EN 13140:2000+A1:2009 |
Agricultural machinery – Sugar beet and fodder beet harvesting equipment – Safety (EN 13140:2000+A1:2009) |
522. |
HRN EN 13155:2009 |
Granici – Sigurnost – Ovjesna sredstva (EN 13155:2003+A2:2009) |
EN 13155:2003+A2:2009 |
Cranes – Safety – Non-fixed load lifting attachments (EN 13155:2003+A2:2009) |
523. |
HRN EN 13157:2010 |
Granici – Sigurnost – Dizalice na ručni pogon (EN 13157:2004+A1:2009) |
EN 13157:2004+A1:2009 |
Cranes – Safety – Hand powered cranes (EN 13157:2004+A1:2009) |
524. |
HRN EN 13204:2012 |
Dvoradni hidraulični alati za spašavanje u vatrogastvu i spasilačkoj službi – Zahtjevi za sigurnost i svojstva (EN 13204:2004+A1:2012) |
EN 13204:2004+A1:2012 |
Double acting hydraulic rescue tools for fire and rescue service use – Safety and performance requirements (EN 13204:2004+A1:2012) |
525. |
HRN EN 13208:2010 |
Strojevi za preradu hrane – Strojevi za guljenje povrća – Sigurnosni i higijenski zahtjevi (EN 13208:2003+A1:2010) |
EN 13208:2003+A1:2010 |
Food processing machinery – Vegetable peelers – Safety and hygiene requirements (EN 13208:2003+A1:2010) |
526. |
HRN EN 13218:2008 |
Alatni strojevi – Sigurnost – Nepomične brusilice (EN 13218:2002+A1:2008+AC:2008) |
EN 13218:2002+A1:2008 |
Machine tools – Safety – Stationary grinding machines (EN 13218:2002+A1:2008+AC:2008) |
527. |
HRN EN 13218:2008/Ispr.1:2013 |
Alatni strojevi – Sigurnost – Nepomične brusilice (EN 13218:2002+A1:2008/AC:2010) |
EN 13218:2002+A1:2008/AC:2010 |
Machine tools – Safety – Stationary grinding machines (EN 13218:2002+A1:2008/AC:2010) |
528. |
HRN EN 13241-1:2011 |
Industrijska, komercijalna, garažna i ostala ulazna vrata – Norma za proizvod – 1. dio: Proizvodi bez otpornosti na vatru ili svojstva kontrole dima (EN 13241-1:2003+A1:2011) |
EN 13241-1:2003+A1:2011 |
Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics (EN 13241-1:2003+A1:2011) |
529. |
HRN EN 13288:2010 |
Strojevi za preradu hrane – Strojevi za podizanje i nagibanje zdjela – Sigurnosni i higijenski zahtjevi (EN 13288:2005+A1:2009) |
EN 13288:2005+A1:2009 |
Food processing machinery – Bowl lifting and tilting machines – Safety and hygiene requirements (EN 13288:2005+A1:2009) |
530. |
HRN EN 13289:2013 |
Pogoni za proizvodnju tjestenine – Uređaji za sušenje i hlađenje – Sigurnosni i higijenski zahtjevi (EN 13289:2001+A1:2013) |
EN 13289:2001+A1:2013 |
Pasta processing plants – Dryers and coolers – Safety and hygiene requirements (EN 13289:2001+A1:2013) |
531. |
HRN EN 13355:2009 |
Postrojenja za prevlačenje – Višenamjenske komore – Sigurnosni zahtjevi (EN 13355:2004+A1:2009) |
EN 13355:2004+A1:2009 |
Coating plants – Combined booths – Safety requirements (EN 13355:2004+A1:2009) |
532. |
HRN EN 13367:2009 |
Keramički strojevi – Sigurnost – Platforme i vozila za prijenos (EN 13367:2005+A1:2008) |
EN 13367:2005+A1:2008 |
Ceramic machines – Safety – Transfer platforms and cars (EN 13367:2005+A1:2008) |
533. |
HRN EN 13367:2009/Ispr.1:2010 |
Keramički strojevi – Sigurnost – Platforme i vozila za prijenos (EN 13367:2005+A1:2008/AC:2009) |
EN 13367:2005+A1:2008/AC:2009 |
Ceramic machines – Safety – Transfer platforms and cars (EN 13367:2005+A1:2008/AC:2009) |
534. |
HRN EN 13378:2013 |
Pogoni za proizvodnju tjestenine – Preše za tjesteninu – Sigurnosni i higijenski zahtjevi (EN 13378:2001+A1:2013) |
EN 13378:2001+A1:2013 |
Pasta processing plants – Pasta presses – Safety and hygiene requirements (EN 13378:2001+A1:2013) |
535. |
HRN EN 13379:2013 |
Pogoni za proizvodnju tjestenine – Stroj za razgrtanje, skidanje i rezanje, traka za vraćanje klipića, spremnik za klipić – Sigurnosni i higijenski zahtjevi (EN 13379:2001+A1:2013) |
EN 13379:2001+A1:2013 |
Pasta processing plants – Spreader, stripping and cutting machine, stick return conveyor, stick magazine – Safety and hygiene requirements (EN 13379:2001+A1:2013) |
536. |
HRN EN 13389:2010 |
Strojevi za preradu hrane – Miješalice sa horizontalnim osovinama – Sigurnosni i higijenski zahtjevi (EN 13389:2005+A1:2009) |
EN 13389:2005+A1:2009 |
Food processing machinery – Mixers with horizontal shafts – Safety and hygiene requirements (EN 13389:2005+A1:2009) |
537. |
HRN EN 13390:2010 |
Strojevi za preradu hrane – Strojevi za pite i kolače – Sigurnosni i higijenski zahtjevi (EN 13390:2002+A1:2009) |
EN 13390:2002+A1:2009 |
Food processing machinery – Pie and tart machines – Safety and hygiene requirements (EN 13390:2002+A1:2009) |
538. |
HRN EN 13411-1:2009 |
Završetci čelične užadi – Sigurnost – 1. dio: Uške za priveznice čelične užadi (EN 13411-1:2002+A1:2008) |
EN 13411-1:2002+A1:2008 |
Terminations for steel wire ropes – Safety – Part 1: Thimbles for steel wire rope slings (EN 13411-1:2002+A1:2008) |
539. |
HRN EN 13411-2:2009 |
Završetci čelične užadi – Sigurnost – 2. dio: Uplitanje omči za čelične priveznice (EN 13411-2:2001+A1:2008) |
EN 13411-2:2001+A1:2008 |
Terminations for steel wire ropes – Safety – Part 2: Splicing of eyes for wire rope slings (EN 13411-2:2001+A1:2008) |
540. |
HRN EN 13411-3:2008 |
Završetci čeličnih užadi – Sigurnost – 3. dio: Omče s uprešanim stezaljkama (EN 13411-3:2004+A1:2008) |
EN 13411-3:2004+A1:2008 |
Terminations for steel wire ropes – Safety – Part 3: Ferrules and ferrule-securing (EN 13411-3:2004+A1:2008) |
541. |
HRN EN 13411-4:2011 |
Završetci čeličnih užadi – Sigurnost – 4. dio: Metalni i plastični zaliveni završetci (EN 13411-4:2011) |
EN 13411-4:2011 |
Terminations for steel wire ropes – Safety – Part 4: Metal and resin socketing (EN 13411-4:2011) |
542. |
HRN EN 13411-5:2008 |
Završetci čeličnih užadi – Sigurnost – 5. dio: U-stezači za čeličnu užad (EN 13411-5:2003+A1:2008) |
EN 13411-5:2003+A1:2008 |
Terminations for steel wire ropes – Safety – Part 5: U-bolt wire rope grips (EN 13411-5:2003+A1:2008) |
543. |
HRN EN 13411-6:2008 |
Završetci čeličnih užadi – Sigurnost – 6. dio: Asimetrična uška s klinom (EN 13411-6:2004+A1:2008) |
EN 13411-6:2004+A1:2008 |
Terminations for steel wire ropes – Safety – Part 6: Asymmetric wedge socket (EN 13411-6:2004+A1:2008) |
544. |
HRN EN 13411-7:2008 |
Završetci čeličnih užadi – Sigurnost – 7. dio: Simetrična uška s klinom (EN 13411-7:2006+A1:2008) |
EN 13411-7:2006+A1:2008 |
Terminations for steel wire ropes – Safety – Part 7: Symmetric wedge socket (EN 13411-7:2006+A1:2008) |
545. |
HRN EN 13411-8:2012 |
Završetci čeličnih užadi – Sigurnost – 8. dio: Završetci i uprešavanje (EN 13411-8:2011) |
EN 13411-8:2011 |
Terminations for steel wire ropes – Safety – Part 8: Swage terminals and swaging (EN 13411-8:2011) |
546. |
HRN EN 13414-1:2008 |
Priveznice od čelične užadi – Sigurnost – 1. dio: Priveznice za opću namjenu (EN 13414-1:2003+A2:2008) |
EN 13414-1:2003+A2:2008 |
Steel wire rope slings – Safety – Part 1: Slings for general lifting service (EN 13414-1:2003+A2:2008) |
547. |
HRN EN 13414-2:2008 |
Priveznice od čelične užadi – Sigurnost – 2. dio: Upute za uporabu i održavanje, koje osigurava proizvođač (EN 13414-2:2003+A2:2008) |
EN 13414-2:2003+A2:2008 |
Steel wire rope slings – Safety – Part 2: Specification for information for use and maintenance to be provided by the manufacturer (EN 13414-2:2003+A2:2008) |
548. |
HRN EN 13414-3:2009 |
Priveznice od čelične užadi – Sigurnost – 3. dio: Upletene priveznice – Beskonačne priveznice i priveznice s dvije omče (EN 13414-3:2003+A1:2008) |
EN 13414-3:2003+A1:2008 |
Steel wire rope slings – Safety – Part 3: Grommets and cable-laid slings (EN 13414-3:2003+A1:2008) |
549. |
HRN EN 13418:2013 |
Strojevi za gumu i plastiku – Strojevi za namatanje folija i ploča – Sigurnosni zahtjevi (EN 13418:2013) |
EN 13418:2013 |
Plastics and rubber machines – Winding machines for film or sheet – Safety requirements (EN 13418:2013) |
550. |
HRN EN 13448:2010 |
Poljoprivredna i šumarska mehanizacija – Strojevi i oruđa za radove unutar reda – Sigurnost (EN 13448:2001+A1:2009) |
EN 13448:2001+A1:2009 |
Agricultural and forestry machinery – Inter-row mowing units – Safety (EN 13448:2001+A1:2009) |
551. |
HRN EN 13457:2010 |
Strojevi za izradu obuće, kože i predmeta od imitacije kože – Rasijecanje, laminiranje, rezanje, cementiranje i strojevi za sušenje cementom – Sigurnosni zahtjevi (EN 13457:2004+A1:2010) |
EN 13457:2004+A1:2010 |
Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements (EN 13457:2004+A1:2010) |
552. |
HRN EN 13478:2008 |
Sigurnost strojeva – Prevencija i zaštita od požara (EN 13478:2001+A1:2008) |
EN 13478:2001+A1:2008 |
Safety of machinery – Fire prevention and protection (EN 13478:2001+A1:2008) |
553. |
HRN EN ISO 13482:2014 |
Roboti i robotski uređaji – Sigurnosni zahtjevi za poslužne robote (ISO 13482:2014; EN ISO 13482:2014) |
EN ISO 13482:2014 |
Robots and robotic devices – Safety requirements for personal care robots (ISO 13482:2014; EN ISO 13482:2014) |
554. |
HRN EN 13490:2009 |
Mehaničke vibracije – Industrijska vozila – Laboratorijsko ocjenjivanje i specifikacija za vibracije sjedala operatora (EN 13490:2001+A1:2008) |
EN 13490:2001+A1:2008 |
Mechanical vibration – Industrial trucks – Laboratory evaluation and specification of operator seat vibration (EN 13490:2001+A1:2008) |
555. |
HRN EN 13524:2014 |
Strojevi za održavanje autocesta – Sigurnosni zahtjevi (EN 13524:2003+A2:2014) |
EN 13524:2003+A2:2014 |
Highway maintenance machines – Safety requirements (EN 13524:2003+A2:2014) |
556. |
HRN EN 13525:2010 |
Šumarska mehanizacija – Iverači drva – Sigurnost (EN 13525:2005+A2:2009) |
EN 13525:2005+A2:2009 |
Forestry machinery – Wood chippers – Safety (EN 13525:2005+A2:2009) |
557. |
HRN EN 13531:2009 |
Strojevi za zemljane radove – Zaštitna konstrukcija pri prevrtanju (TOPS) za mini bagere – Laboratorijska ispitivanja i zahtjevi za izvedbu (ISO 12117:1997, MOD; EN 13531:2001+A1:2008) |
EN 13531:2001+A1:2008 |
Earth-moving machinery – Tip-over protection structure (TOPS) for compact excavators – Laboratory tests and performance requirements (ISO 12117:1997, MOD; EN 13531:2001+A1:2008) |
558. |
HRN EN 13534:2010 |
Strojevi za preradu hrane – Strojevi za soljenje injektiranjem – Sigurnosni i higijenski zahtjevi (EN 13534:2006+A1:2010) |
EN 13534:2006+A1:2010 |
Food processing machinery – Curing injection machines – Safety and hygiene requirements (EN 13534:2006+A1:2010) |
559. |
HRN EN 13557:2008 |
Granici – Upravljački uređaji i njihov smještaj (EN 13557:2003+A2:2008) |
EN 13557:2003+A2:2008 |
Cranes – Controls and control stations (EN 13557:2003+A2:2008) |
560. |
HRN EN 13561:2008 |
Vanjska sjenila – Izvedbeni zahtjevi uključujući sigurnost (EN 13561:2004+A1:2008) |
EN 13561:2004+A1:2008 |
External blinds – Performance requirements including safety (EN 13561:2004+A1:2008) |
561. |
HRN EN 13570:2010 |
Strojevi za preradu hrane – Miješalice i strojevi za miješanje – Sigurnosni i higijenski zahtjevi (EN 13570:2005+A1:2010) |
EN 13570:2005+A1:2010 |
Food processing machinery – Mixing machines – Safety and hygiene requirements (EN 13570:2005+A1:2010) |
562. |
HRN EN 13586:2008 |
Granici – Pristup (EN 13586:2004+A1:2008) |
EN 13586:2004+A1:2008 |
Cranes – Access (EN 13586:2004+A1:2008) |
563. |
HRN EN 13591:2010 |
Strojevi za preradu hrane – Ubacivači u peć s fiksiranim poklopcem – Sigurnosni i higijenski zahtjevi (EN 13591:2005+A1:2009) |
EN 13591:2005+A1:2009 |
Food processing machinery – Fixed deck oven loaders – Safety and hygiene requirements (EN 13591:2005+A1:2009) |
564. |
HRN EN 13617-1:2013 |
Benzinske stanice za punjenje – 1. dio: Sigurnosni zahtjevi za konstrukciju i izvedbu mjernih pumpi, mjernih uređaja za istakanje goriva i daljinski upravljanih pumpnih jedinica (EN 13617-1:2012) |
EN 13617-1:2012 |
Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units (EN 13617-1:2012) |
565. |
HRN EN 13621:2010 |
Strojevi za preradu hrane – Sušilice za salatu – Sigurnosni i higijenski zahtjevi (EN 13621:2004+A1:2010) |
EN 13621:2004+A1:2010 |
Food processing machinery – Salad dryers – Safety and hygiene requirements (EN 13621:2004+A1:2010) |
566. |
HRN EN 13659:2008 |
Zasloni – Izvedbeni zahtjevi uključujući sigurnost (EN 13659:2004+A1:2008) |
EN 13659:2004+A1:2008 |
Shutters – Performance requirements including safety (EN 13659:2004+A1:2008) |
567. |
HRN EN 13675:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za postrojenja za oblikovanje i valjanje cijevi i oprema za njihovu završnu obradu (EN 13675:2004+A1:2010) |
EN 13675:2004+A1:2010 |
Safety of machinery – Safety requirements for tube forming and rolling mills and their finishing line equipment (EN 13675:2004+A1:2010) |
568. |
HRN EN 13683:2013 |
Oprema za vrtove i parkove – Sitnilice za odrezane grane – Sigurnost (EN 13683:2003+A2:2011) |
EN 13683:2003+A2:2011 |
Garden equipment – Integrally powered shredders/chippers – Safety (EN 13683:2003+A2:2011) |
569. |
HRN EN 13683:2013/Ispr.1:2014 |
Oprema za vrtove i parkove – Sitnilice za odrezane grane – Sigurnost (EN 13683:2003+A2:2011/AC:2013) |
EN 13683:2003+A2:2011/AC:2013 |
Garden equipment – Integrally powered shredders/chippers – Safety (EN 13683:2003+A2:2011/AC:2013) |
570. |
HRN EN 13684:2010 |
Oprema za vrtove i parkove – Ručno upravljani prozračivači za travnjake – Sigurnost (EN 13684:2004+A3:2009) |
EN 13684:2004+A3:2009 |
Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety (EN 13684:2004+A3:2009) |
571. |
HRN EN 13731:2008 |
Sustavi jastuka za dizanje koje upotrebljava vatrogasna i spasilačka služba – Zahtjevi za sigurnost i svojstva (EN 13731:2007) |
EN 13731:2007 |
Lifting bag systems for fire and rescue service use – Safety and performance requirements (EN 13731:2007) |
572. |
HRN EN 13732:2013 |
Strojevi za preradu hrane – Hladnjaci za mlijeko u rinfuzi na farmama – Zahtjevi za izvedbu, sigurnost i higijenu (EN 13732:2013) |
EN 13732:2013 |
Food processing machinery – Bulk milk coolers on farms – Requirements for performance, safety and hygiene (EN 13732:2013) |
573. |
HRN EN ISO 13732-1:2008 |
Ergonomija toplinskog okoliša – Metode za procjenu ljudskih reakcija na dodir s površinama – 1. dio: Vruće površine (ISO 13732-1:2006; EN ISO 13732-1:2008) |
EN ISO 13732-1:2008 |
Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces (ISO 13732-1:2006; EN ISO 13732-1:2008) |
574. |
HRN EN ISO 13732-3:2010 |
Ergonomija toplinskog okruženja – Metode za procjenu ljudskih reakcija na kontakt s površinama – 3. dio: Hladne površine (ISO 13732-3:2005; EN ISO 13732-3:2008) |
EN ISO 13732-3:2008 |
Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 3: Cold surfaces (ISO 13732-3:2005; EN ISO 13732-3:2008) |
575. |
HRN EN 13736:2009 |
Sigurnost alatnih strojeva – Pneumatske preše (EN 13736:2003+A1:2009) |
EN 13736:2003+A1:2009 |
Safety of machine tools – Pneumatic presses (EN 13736:2003+A1:2009) |
576. |
HRN EN ISO 13753:2009 |
Mehaničke vibracije i udari – Vibracije ruku – Metoda mjerenja vibracijskoga prijenosnog faktora elastičnih materijala pri opterećenju rukom (ISO 13753:1998; EN ISO 13753:2008) |
EN ISO 13753:2008 |
Mechanical vibration and shock – Hand-arm vibration – Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998; EN ISO 13753:2008) |
577. |
HRN EN ISO 13849-1:2008 |
Sigurnost strojeva – Sigurnosni dijelovi sustava za nadzor – 1. dio: Osnovna načela za projektiranje (ISO 13849-1:2006; EN ISO 13849-1:2008) |
EN ISO 13849-1:2008 |
Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1:2006; EN ISO 13849-1:2008) |
578. |
HRN EN ISO 13849-1:2008/Ispr.1:2009 |
Sigurnost strojeva – Sigurnosni dijelovi sustava za nadzor – 1. dio: Osnovna načela za projektiranje (ISO 13849-1:2006/Cor 1:2009; EN ISO 13849-1:2008/AC:2009) |
EN ISO 13849-1:2008/AC:2009 |
Safety of machinery – Safety-related parts of control systems – Part 1: General principles for design (ISO 13849-1:2006/Cor 1:2009; EN ISO 13849-1:2008/AC:2009) |
579. |
HRN EN ISO 13849-2:2013 |
Sigurnost strojeva – Sigurnosni dijelovi sustava za nadzor – 2. dio: Potvrđivanje (ISO 13849-2:2012; EN ISO 13849-2:2012) |
EN ISO 13849-2:2012 |
Safety of machinery – Safety-related parts of control systems – Part 2: Validation (ISO 13849-2:2012; EN ISO 13849-2:2012) |
580. |
HRN EN ISO 13850:2008 |
Sigurnost strojeva – Zaustavljanje u nuždi – Načela za projektiranje (ISO 13850:2006; EN ISO 13850:2008) |
EN ISO 13850:2008 |
Safety of machinery – Emergency stop – Principles for design (ISO 13850:2006; EN ISO 13850:2008) |
581. |
HRN EN 13852-1:2013 |
Granici – Odobalni granici – 1. dio: Odobalni granici opće namjene (EN 13852-1:2013) |
EN 13852-1:2013 |
Cranes – Offshore cranes – Part 1: General purpose offshore cranes (EN 13852-1:2013) |
582. |
HRN EN ISO 13855:2010 |
Sigurnost strojeva – Postavljanje zaštitne opreme obzirom na brzinu približavanja pojedinih dijelova ljudskog tijela (ISO 13855:2010; EN ISO 13855:2010) |
EN ISO 13855:2010 |
Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010; EN ISO 13855:2010) |
583. |
HRN EN ISO 13856-1:2013 |
Sigurnost strojeva – Zaštitni uređaji osjetljivi na tlak – 1. dio: Opća načela za projektiranje i ispitivanje podova osjetljivih na tlak i obloga osjetljivih na tlak (ISO 13856-1:2013; EN ISO 13856-1:2013) |
EN ISO 13856-1:2013 |
Safety of machinery – Pressure-sensitive protective devices – Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013; EN ISO 13856-1:2013) |
584. |
HRN EN ISO 13856-2:2013 |
Sigurnost strojeva – Zaštitni uređaji osjetljivi na tlak – 1. dio: Opća načela za projektiranje i ispitivanje bridova osjetljivih na tlak i šipki osjetljivih na tlak (ISO 13856-2:2013; EN ISO 13856-2:2013) |
EN ISO 13856-2:2013 |
Safety of machinery – Pressure-sensitive protective devices – Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013; EN ISO 13856-2:2013) |
585. |
HRN EN ISO 13856-3:2013 |
Sigurnost strojeva – Zaštitni uređaji osjetljivi na tlak – 3. dio: Opća načela za projektiranje i ispitivanje odbojnika, ploča, žica i sličnih uređaja osjetljivih na tlak (ISO 13856-3:2013; EN ISO 13856-3:2013) |
EN ISO 13856-3:2013 |
Safety of machinery – Pressure-sensitive protective devices – Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013; EN ISO 13856-3:2013) |
586. |
HRN EN ISO 13857:2008 |
Sigurnost strojeva – Sigurnosne udaljenosti radi sprečavanja dosezanja opasnih područja gornjim i donjim ekstremitetima (ISO 13857:2008; EN ISO 13857:2008) |
EN ISO 13857:2008 |
Safety of machinery – Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008; EN ISO 13857:2008) |
587. |
HRN EN 13862:2009 |
Strojevi za rezanje podova – Sigurnost (EN 13862:2001+A1:2009) |
EN 13862:2001+A1:2009 |
Floor cutting-off machines – Safety (EN 13862:2001+A1:2009) |
588. |
HRN EN 13870:2010 |
Strojevi za preradu hrane – Strojevi za sjeckanje – Sigurnosni i higijenski zahtjevi (EN 13870:2005+A1:2010) |
EN 13870:2005+A1:2010 |
Food processing machinery – Chop cutting machines – Safety and hygiene requirements (EN 13870:2005+A1:2010) |
589. |
HRN EN 13871:2010 |
Strojevi za preradu hrane – Strojevi za rezanje na kocke – Sigurnosni i higijenski zahtjevi (EN 13871:2005+A1:2010) |
EN 13871:2005+A1:2010 |
Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements (EN 13871:2005+A1:2010) |
590. |
HRN EN 13885:2010 |
Strojevi za preradu hrane – Strojevi za zatvaranje – Sigurnosni i higijenski zahtjevi (EN 13885:2005+A1:2010) |
EN 13885:2005+A1:2010 |
Food processing machinery – Clipping machines – Safety and hygiene requirements (EN 13885:2005+A1:2010) |
591. |
HRN EN 13886:2010 |
Strojevi za preradu hrane – Kotlovi za kuhanje opremljeni mješačima i/ili miješalicama – Sigurnosni i higijenski zahtjevi (EN 13886:2005+A1:2010) |
EN 13886:2005+A1:2010 |
Food processing machinery – Cooking kettles equipped with powered stirrer and/or mixer – Safety and hygiene requirements (EN 13886:2005+A1:2010) |
592. |
HRN EN 13889:2009 |
Kovani čelični škopci za opću uporabu – D škopci i trbušasti škopci – Razred 6 – Sigurnost (EN 13889:2003+A1:2008) |
EN 13889:2003+A1:2008 |
Forged steel shackles for general lifting purposes – Dee shackles and bow shackles – Grade 6 – Safety (EN 13889:2003+A1:2008) |
593. |
HRN EN 13898:2009 |
Alatni strojevi – Sigurnost – Strojevi za piljenje metala (EN 13898:2003+A1:2009) |
EN 13898:2003+A1:2009 |
Machine tools – Safety – Sawing machines for cold metal (EN 13898:2003+A1:2009) |
594. |
HRN EN 13898:2009/Ispr.1:2012 |
Alatni strojevi – Sigurnost – Strojevi za piljenje metala (EN 13898:2003+A1:2009/AC:2010) |
EN 13898:2003+A1:2009/AC:2010 |
Machine tools – Safety – Sawing machines for cold metal (EN 13898:2003+A1:2009/AC:2010) |
595. |
HRN EN 13951:2012 |
Pumpe za kapljevine – Sigurnosni zahtjevi – Oprema za poljoprivredne prehrambene proizvode – Pravila projektiranja za osiguravanje higijene u uporabi (EN 13951:2012) |
EN 13951:2012 |
Liquid pumps – Safety requirements – Agrifoodstuffs equipment – Design rules to ensure hygiene in use (EN 13951:2012) |
596. |
HRN EN 13954:2010 |
Strojevi za preradu hrane – Rezači kruha – Sigurnosni i higijenski zahtjevi (EN 13954:2005+A1:2010) |
EN 13954:2005+A1:2010 |
Food processing machinery – Bread slicers – Safety and hygiene requirements (EN 13954:2005+A1:2010) |
597. |
HRN EN 13977:2011 |
Oprema za željeznice – Željeznički gornji ustroj – Sigurnosni zahtjevi za prijenosne strojeve i tračnička kolica za izgradnju i održavanje pruga (EN 13977:2011) |
EN 13977:2011 |
Railway applications – Track – Safety requirements for portable machines and trolleys for construction and maintenance (EN 13977:2011) |
598. |
HRN EN 13985:2009 |
Alatni strojevi – Sigurnost – Strojne škare (EN 13985:2003+A1:2009) |
EN 13985:2003+A1:2009 |
Machine tools – Safety – Guillotine shears (EN 13985:2003+A1:2009) |
599. |
HRN EN 14010:2009 |
Sigurnost strojeva – Oprema za parkiranje s pomoću upravljane snage motornih vozila – Sigurnosni zahtjevi i zahtjevi EMC za oblikovanje, proizvodnju, faze sklapanja i puštanje u pogon (EN 14010:2003+A1:2009) |
EN 14010:2003+A1:2009 |
Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages (EN 14010:2003+A1:2009) |
600. |
HRN EN 14017:2010 |
Poljoprivredna i šumarska mehanizacija – Raspodjeljivači za kruta gnojiva – Sigurnost (EN 14017:2005+A2:2009) |
EN 14017:2005+A2:2009 |
Agricultural and forestry machinery – Solid fertilizer distributors – Safety (EN 14017:2005+A2:2009) |
601. |
HRN EN 14018:2010 |
Poljoprivredna i šumarska mehanizacija – Sijačice – Sigurnost (EN 14018:2005+A1:2009) |
EN 14018:2005+A1:2009 |
Agricultural and forestry machinery – Seed drills – Safety (EN 14018:2005+A1:2009) |
602. |
HRN EN 14033-3:2011 |
Oprema za željeznice – Željeznički gornji ustroj – Kolosiječni strojevi za gradnju i održavanje – 3. dio: Opći sigurnosni zahtjevi (EN 14033-3:2009+A1:2011) |
EN 14033-3:2009+A1:2011 |
Railway applications – Track – Railbound construction and maintenance machines – Part 3: General safety requirements (EN 14033-3:2009+A1:2011) |
603. |
HRN EN 14043:2014 |
Vozila visokog dosega za spašavanje i gašenje požara – Okretne ljestve s kombiniranim gibanjem – Zahtjevi za sigurnost i svojstva te metode ispitivanja (EN 14043:2014) |
EN 14043:2014 |
High rise aerial appliances for fire and rescue service use – Turntable ladders with combined movements – Safety and performance requirements and test methods (EN 14043:2014) |
604. |
HRN EN 14044:2014 |
Vozila visokog dosega za spašavanje i gašenje požara – Okretne ljestve sa sekvencijskim gibanjem – Zahtjevi za sigurnost i svojstva te metode ispitivanja (EN 14044:2014) |
EN 14044:2014 |
High rise aerial appliances for fire and rescue service use – Turntable ladders with sequential movements – Safety and performance requirements and test methods (EN 14044:2014) |
605. |
HRN EN 14070:2009 |
Sigurnost alatnih strojeva – Transfer linije i strojevi posebne namjene (EN 14070:2003+A1:2009) |
EN 14070:2003+A1:2009 |
Safety of machine tools – Transfer and special purpose machines (EN 14070:2003+A1:2009) |
606. |
HRN EN 14070:2009/Ispr.1:2012 |
Sigurnost alatnih strojeva – Transfer linije i strojevi posebne namjene (EN 14070:2003+A1:2009/AC:2010) |
EN 14070:2003+A1:2009/AC:2010 |
Safety of machine tools – Transfer and special-purpose machines (EN 14070:2003+A1:2009/AC:2010) |
607. |
HRN EN ISO 14119:2014 |
Sigurnost strojeva -– Uređaji za zabravljivanje povezani štitnicima -– Načela projektiranja i odabira (ISO 14119:2013; EN ISO 14119:2013) |
EN ISO 14119:2013 |
Safety of machinery – Interlocking devices associated with guards – Principles for design and selection (ISO 14119:2013; EN ISO 14119:2013) |
608. |
HRN EN ISO 14122-1:2008 |
Sigurnost strojeva – Trajni način prilaza strojevima – 1. dio: Izbor trajnih načina prilaza između dvije razine (ISO 14122-1:2001; EN ISO 14122-1:2001) |
EN ISO 14122-1:2001 |
Safety of machinery – Permanent means of access to machinery – Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001; EN ISO 14122-1:2001) |
609. |
HRN EN ISO 14122-1:2008/A1:2010 |
Sigurnost strojeva – Trajni način prilaza strojevima – 1. dio: Izbor trajnih načina prilaza između dvije razine (ISO 14122-1:2001/Amd 1:2010; EN ISO 14122-1:2001/A1:2010) |
EN ISO 14122-1:2001/A1:2010 |
Safety of machinery – Permanent means of access to machinery – Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001/Amd 1:2010; EN ISO 14122-1:2001/A1:2010) |
610. |
HRN EN ISO 14122-2:2008 |
Sigurnost strojeva – Trajni način prilaza strojevima – 2. dio: Radne platforme i prolazi (ISO 14122-2:2001; EN ISO 14122-2:2001) |
EN ISO 14122-2:2001 |
Safety of machinery – Permanent means of access to machinery – Part 2: Working platforms and walkways (ISO 14122-2:2001; EN ISO 14122-2:2001) |
611. |
HRN EN ISO 14122-2:2008/A1:2010 |
Sigurnost strojeva – Trajni način prilaza strojevima – 2. dio: Radne platforme i prolazi (ISO 14122-2:2001/Amd 1:2010; EN ISO 14122-2:2001/A1:2010) |
EN ISO 14122-2:2001/A1:2010 |
Safety of machinery – Permanent means of access to machinery – Part 2: Working platforms and walkways (ISO 14122-2:2001/Amd 1:2010; EN ISO 14122-2:2001/A1:2010) |
612. |
HRN EN ISO 14122-3:2008 |
Sigurnost strojeva – Trajni način prilaza strojevima – 3. dio: Stepenice, sklopive ljestve i sigurnosne ograde (ISO 14122-3:2001; EN ISO 14122-3:2001) |
EN ISO 14122-3:2001 |
Safety of machinery – Permanent means of access to machinery – Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001; EN ISO 14122-3:2001) |
613. |
HRN EN ISO 14122-3:2008/A1:2010 |
Sigurnost strojeva – Trajni način prilaza strojevima – 3. dio: Stepenice, sklopive ljestve i sigurnosne ograde (ISO 14122-3:2001/Amd 1:2010; EN ISO 14122-3:2001/A1:2010) |
EN ISO 14122-3:2001/A1:2010 |
Safety of machinery – Permanent means of access to machinery – Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001/Amd 1:2010; EN ISO 14122-3:2001/A1:2010) |
614. |
HRN EN ISO 14122-4:2008 |
Sigurnost strojeva – Trajni način prilaza strojevima – 4. dio: Nepomične ljestve (ISO 14122-4:2004; EN ISO 14122-4:2004) |
EN ISO 14122-4:2004 |
Safety of machinery – Permanent means of access to machinery – Part 4: Fixed ladders (ISO 14122-4:2004; EN ISO 14122-4:2004) |
615. |
HRN EN ISO 14122-4:2008/A1:2012 |
Sigurnost strojeva – Trajni način prilaza strojevima – 4. dio: Nepomične ljestve (ISO 14122-4:2004/Amd 1:2010; EN ISO 14122-4:2004/A1:2010) |
EN ISO 14122-4:2004/A1:2010 |
Safety of machinery – Permanent means of access to machinery – Part 4: Fixed ladders (ISO 14122-4:2004/Amd 1:2010; EN ISO 14122-4:2004/A1:2010) |
616. |
HRN EN ISO 14159:2008 |
Sigurnost strojeva – Higijenski zahtjevi za konstruiranje strojeva (ISO 14159:2002; EN ISO 14159:2008) |
EN ISO 14159:2008 |
Safety of machinery – Hygiene requirements for the design of machinery (ISO 14159:2002; EN ISO 14159:2008) |
617. |
HRN EN 14238:2010 |
Granici – Ručno vođeni manipulatori (EN 14238:2004+A1:2009) |
EN 14238:2004+A1:2009 |
Cranes – Manually controlled load manipulating devices (EN 14238:2004+A1:2009) |
618. |
HRN EN ISO 14314:2010 |
Klipni motori s unutrašnjim izgaranjem – Oprema za električno pokretanje – Opći sigurnosni zahtjevi (ISO 14314:2004; EN ISO 14314:2009) |
EN ISO 14314:2009 |
Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements (ISO 14314:2004; EN ISO 14314:2009) |
619. |
HRN EN 14439:2009 |
Granici – Sigurnost – Toranjski granici (EN 14439:2006+A2:2009) |
EN 14439:2006+A2:2009 |
Cranes – Safety – Tower cranes (EN 14439:2006+A2:2009) |
620. |
HRN EN 14462:2009 |
Oprema za površinsku obradu – Pravilo za ispitivanje buke opreme za površinsku obradu uključujući i ručnu vibracijsku opremu – Razred točnosti 2 i 3 (EN 14462:2005+A1:2009) |
EN 14462:2005+A1:2009 |
Surface treatment equipment – Noise test code for surface treatment equipment including its ancillary handling equipment – Accuracy grades 2 and 3 (EN 14462:2005+A1:2009) |
621. |
HRN EN 14466:2008 |
Vatrogasne pumpe – Prijenosne pumpe – Zahtjevi za sigurnost i svojstva, ispitivanje (EN 14466:2005+A1:2008) |
EN 14466:2005+A1:2008 |
Fire-fighting pumps – Portable pumps – Safety and performance requirements, tests (EN 14466:2005+A1:2008) |
622. |
HRN EN 14492-1:2010 |
Granici – Vitla i dizalice na strojni pogon – 1. dio: Vitla s pogonom (EN 14492-1:2006+A1:2009+AC:2010) |
EN 14492-1:2006+A1:2009 |
Cranes – Power driven winches and hoists – Part 1: Power driven winches (EN 14492-1:2006+A1:2009+AC:2010) |
623. |
HRN EN 14492-2:2010 |
Granici – Vitla i dizalice na strojni pogon – 2. dio: Dizalice na strojni pogon (EN 14492-2:2006+A1:2009+AC:2010) |
EN 14492-2:2006+A1:2009 |
Cranes – Power driven winches and hoists – Part 2: Power driven hoists (EN 14492-2:2006+A1:2009+AC:2010) |
624. |
HRN EN 14502-2:2008 |
Granici – Oprema za dizanje osoba – 2. dio: Podizne upravljačke postaje (EN 14502-2:2005+A1:2008) |
EN 14502-2:2005+A1:2008 |
Cranes – Equipment for the lifting of persons – Part 2: Elevating control stations (EN 14502-2:2005+A1:2008) |
625. |
HRN EN 14655:2010 |
Strojevi za preradu hrane – Rezači francuskog kruha (bageta) – Sigurnosni i higijenski zahtjevi (EN 14655:2005+A1:2010) |
EN 14655:2005+A1:2010 |
Food processing machinery – Baguette slicers – Safety and hygiene requirements (EN 14655:2005+A1:2010) |
626. |
HRN EN 14656:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za preše za ekstrudiranje čelike i obojenih metala (EN 14656:2006+A1:2010) |
EN 14656:2006+A1:2010 |
Safety of machinery – Safety requirements for extrusion presses for steel and non-ferrous metals (EN 14656:2006+A1:2010) |
627. |
HRN EN 14658:2010 |
Uređaji i sustavi za neprekidnu dobavu – Opći zahtjevi za sigurnost opreme za neprekidnu dobavu za otvorene rudnike lignita (EN 14658:2005+A1:2010) |
EN 14658:2005+A1:2010 |
Continuous handling equipment and systems – General safety requirements for continuous handling equipment for opencast lignite mining (EN 14658:2005+A1:2010) |
628. |
HRN EN 14673:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za hidraulične preše za vruće kovanje čelika i obojenih metala (EN 14673:2006+A1:2010) |
EN 14673:2006+A1:2010 |
Safety of machinery – Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (EN 14673:2006+A1:2010) |
629. |
HRN EN 14677:2008 |
Sigurnost strojeva – Sekundarna izrada čelika – Strojevi i oprema za obradu tekućeg čelika (EN 14677:2008) |
EN 14677:2008 |
Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel (EN 14677:2008) |
630. |
HRN EN 14681:2011 |
Sigurnost strojeva – Sigurnosni zahtjevi za strojeve i opremu za proizvodnju čelika u elektrolučnim pećima (EN 14681:2006+A1:2010) |
EN 14681:2006+A1:2010 |
Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces (EN 14681:2006+A1:2010) |
631. |
HRN EN 14710-1:2009 |
Vatrogasne pumpe – Centrifugalne vatrogasne pumpe bez vakuum uređaja – 1. dio: Razredba, opći i sigurnosni zahtjevi (EN 14710-1:2005+A2:2008) |
EN 14710-1:2005+A2:2008 |
Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 1: Classification, general and safety requirements (EN 14710-1:2005+A2:2008) |
632. |
HRN EN 14710-2:2009 |
Vatrogasne pumpe – Centrifugalne vatrogasne pumpe bez vakuum uređaja – 2. dio: Verifikacija općih i sigurnosnih zahtjeva (EN 14710-2:2005+A2:2008) |
EN 14710-2:2005+A2:2008 |
Fire-fighting pumps – Fire-fighting centrifugal pumps without primer – Part 2: Verification of general and safety requirements (EN 14710-2:2005+A2:2008) |
633. |
HRN EN ISO 14738:2010 |
Sigurnost strojeva – Antropometrijski zahtjevi za oblikovanje radnih mjesta uz strojeve (ISO 14738:2002+Cor 2:2005; EN ISO 14738:2008) |
EN ISO 14738:2008 |
Safety of machinery – Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002+Cor 2:2005; EN ISO 14738:2008) |
634. |
HRN EN 14753:2008 |
Sigurnost strojeva – Sigurnosni zahtjevi za strojeve i opremu za kontinuirani čelični lijev (EN 14753:2007) |
EN 14753:2007 |
Safety of machinery – Safety requirements for machinery and equipment for the continuous casting of steel (EN 14753:2007) |
635. |
HRN EN 14886:2009 |
Strojevi za plastiku i gumu – Rezačice za pjenaste blokove – Sigurnosni zahtjevi (EN 14886:2008) |
EN 14886:2008 |
Plastics and rubber machines – Bandknife cutting machines for block foams – Safety requirements (EN 14886:2008) |
636. |
HRN EN 14910:2010 |
Oprema za vrtove i parkove – Čistači pokretani motorima s unutrašnjim izgaranjem – Sigurnost (EN 14910:2007+A1:2009) |
EN 14910:2007+A1:2009 |
Garden equipment – Walk-behind combustion engine powered trimmers – Safety (EN 14910:2007+A1:2009) |
637. |
HRN EN 14930:2010 |
Poljoprivredna i šumarska mehanizacija i oprema za vrtove i parkove – Određivanje nehotičnog pristupa vrelim površinama – Dopunski element (EN 14930:2007+A1:2009) |
EN 14930:2007+A1:2009 |
Agricultural and forestry machinery and gardening equipment – Pedestrian controlled and hand-held machines – Determination of accessibility of hot surfaces (EN 14930:2007+A1:2009) |
638. |
HRN EN 14957:2010 |
Strojevi za preradu hrane – Strojevi s transportnom trakom za pranje posuđa – Sigurnosni i higijenski zahtjevi (EN 14957:2006+A1:2010) |
EN 14957:2006+A1:2010 |
Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements (EN 14957:2006+A1:2010) |
639. |
HRN EN 14958:2009 |
Strojevi za preradu hrane – Strojevi za ribanje i obradu brašna i pšenice – Sigurnosni i higijenski zahtjevi (EN 14958:2006+A1:2009) |
EN 14958:2006+A1:2009 |
Food processing machinery – Machinery for grinding and processing flour and semolina – Safety and hygiene requirements (EN 14958:2006+A1:2009) |
640. |
HRN EN 14973:2008 |
Transportne trake za upotrebu u podzemnim instalacijama – Sigurnosni zahtjevi s obzirom na struju i zapaljivost (EN 14973:2006+A1:2008) |
EN 14973:2006+A1:2008 |
Conveyor belts for use in underground installations – Electrical and flammability safety requirements (EN 14973:2006+A1:2008) |
641. |
HRN EN ISO 14982:2010 |
Poljoprivredni i šumarski strojevi – Elektromagnetska kompatibilnost – Metode ispitivanja i mjerila za prihvaćanje (ISO 14982:1998; EN ISO 14982:2009) |
EN ISO 14982:2009 |
Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982:1998; EN ISO 14982:2009) |
642. |
HRN EN 14985:2013 |
Granici – Portalni okretni granici (EN 14985:2012) |
EN 14985:2012 |
Cranes – Slewing jib cranes (EN 14985:2012) |
643. |
HRN EN 15000:2008 |
Sigurnost industrijskih kamiona – Kamioni različitih dometa s vlastitim pogonom – Specifikacije, radne značajke i ispitni zahtjevi za pokazatelj opterećenja uzdužnoga momenta i ograničivač opterećenja uzdužnoga momenta (EN 15000:2008) |
EN 15000:2008 |
Safety of industrial trucks – Self propelled variable reach trucks – Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters (EN 15000:2008) |
644. |
HRN EN 15011:2014 |
Granici – Mosni i portalni granici (EN 15011:2011+A1:2014) |
EN 15011:2011+A1:2014 |
Cranes – Bridge and gantry cranes (EN 15011:2011+A1:2014) |
645. |
HRN EN 15027:2009 |
Prijenosna oprema za zidne pile i pile sa sajlom na gradilištima – Sigurnost (EN 15027:2007+A1:2009) |
EN 15027:2007+A1:2009 |
Transportable wall saw and wire saw equipment for job site – Safety (EN 15027:2007+A1:2009) |
646. |
HRN EN 15056:2009 |
Granici – Zahtjevi za hvataljke za kontejnere (EN 15056:2006+A1:2009) |
EN 15056:2006+A1:2009 |
Cranes – Requirements for container handling spreaders (EN 15056:2006+A1:2009) |
647. |
HRN EN 15059:2009 |
Oprema za tretiranje snijega – Sigurnosni zahtjevi (EN 15059:2009) |
EN 15059:2009 |
Snow grooming equipment – Safety requirements (EN 15059:2009) |
648. |
HRN EN 15061:2009 |
Sigurnost strojeva – Sigurnosni zahtjevi za strojeve i opremu proizvodne linije za izradu traka (EN 15061:2007+A1:2008) |
EN 15061:2007+A1:2008 |
Safety of machinery – Safety requirements for strip processing line machinery and equipment (EN 15061:2007+A1:2008) |
649. |
HRN EN 15067:2008 |
Strojevi za plastiku i gumu – Strojevi za preradu filmova u omote i vreće – Sigurnosni zahtjevi (EN 15067:2007) |
EN 15067:2007 |
Plastics and rubber machines – Film converting machines for bags and sacks – Safety requirements (EN 15067:2007) |
650. |
HRN EN 15093:2008 |
Sigurnost strojeva – Sigurnosni zahtjevi za valjaonice za vruće valjanje plosnatih proizvoda (EN 15093:2008) |
EN 15093:2008 |
Safety of Machinery – Safety requirements for hot flat rolling mills (EN 15093:2008) |
651. |
HRN EN 15094:2008 |
Sigurnost strojeva – Sigurnosni zahtjevi za valjaonice za hladno valjanje plosnatih proizvoda (EN 15094:2008) |
EN 15094:2008 |
Safety of Machinery – Safety requirements for cold flat rolling mills (EN 15094:2008) |
652. |
HRN EN 15095:2009 |
Pomični paletni i poličasti regali, kružno pokretni regali i skladišna dizala na motorni pogon – Sigurnosni zahtjevi (EN 15095:2007+A1:2008) |
EN 15095:2007+A1:2008 |
Power-operated mobile racking and shelving, carousels and storage lifts – Safety requirements (EN 15095:2007+A1:2008) |
653. |
HRN EN 15162:2008 |
Stojevi i postrojenja za iskapanje i obradu prirodnog kamena – Sigurnosni zahtjevi za baterije pila s više oštrica (EN 15162:2008) |
EN 15162:2008 |
Machines and plants for mining and tooling of natural stone – Safety requirements for gang saws (EN 15162:2008) |
654. |
HRN EN 15163:2008 |
Strojevi i uređaji za iskorištavanje i obradu prirodnog kamena – Sigurnosni zahtjevi za pile s dijamantnom sajlom (EN 15163:2008) |
EN 15163:2008 |
Machines and installations for the exploitation and processing of natural stone – Safety – Requirements for diamond wire saws (EN 15163:2008) |
655. |
HRN EN 15164:2008 |
Stojevi i postrojenja za iskapanje i obradu prirodnog kamena – Sigurnost – Zahtjevi za strojeve za izradu utora s lančanim i remenskim prijenosom (EN 15164:2008) |
EN 15164:2008 |
Machines and plants for mining and tooling of natural stone – Safety – Requirements for chain– and belt-slotting machines (EN 15164:2008) |
656. |
HRN EN 15166:2009 |
Strojevi za preradu hrane – Automatski strojevi za rasijecanje mesa u klaonici – Sigurnosni i higijenski zahtjevi (EN 15166:2008) |
EN 15166:2008 |
Food processing machinery – Automatic back splitting machines of butchery carcasses – Safety and hygiene requirements (EN 15166:2008) |
657. |
HRN EN 15268:2008 |
Benzinske stanice za punjenje – Sigurnosni zahtjevi za konstrukciju potopljenih pumpnih sklopova (EN 15268:2008) |
EN 15268:2008 |
Petrol filling stations – Safety requirements for the construction of submersible pump assemblies (EN 15268:2008) |
658. |
EN 15503:2009+A1:2013 |
Garden equipment – Garden blowers, vacuums and blower/vacuums – Safety (EN 15503:2009+A1:2013) |
||
659. |
HRN EN ISO 15536-1:2010 |
Ergonomija – Kompjutorske lutke i modeli tijela – 1. dio: Opći zahtjevi (ISO 15536-1:2005; EN ISO 15536-1:2008) |
EN ISO 15536-1:2008 |
Ergonomics – Computer manikins and body templates – Part 1: General requirements (ISO 15536-1:2005; EN ISO 15536-1:2008) |
660. |
HRN EN 15695-1:2010 |
Poljoprivredni traktori i samopogonjene prskalice – Zaštita operatera (vozača) od opasnih tvari – 1. dio: Razredba kabina, zahtjevi i postupci ispitivanja (EN 15695-1:2009) |
EN 15695-1:2009 |
Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 1: Cab classification, requirements and test procedures (EN 15695-1:2009) |
661. |
HRN EN 15695-2:2010 |
Poljoprivredni traktori i samopogonjene prskalice – Zaštita operatera (vozača) od opasnih tvari – 2. dio: Filtri, zahtjevi i postupci ispitivanja (EN 15695-2:2009) |
EN 15695-2:2009 |
Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures (EN 15695-2:2009) |
662. |
HRN EN 15695-2:2010/Ispr.1:2013 |
Poljoprivredni traktori i samopogonjene prskalice – Zaštita operatera (vozača) od opasnih tvari – 2. dio: Filtri, zahtjevi i postupci ispitivanja (EN 15695-2:2009/AC:2011) |
EN 15695-2:2009/AC:2011 |
Agricultural tractors and self-propelled sprayers – Protection of the operator (driver) against hazardous substances – Part 2: Filters, requirements and test procedures (EN 15695-2:2009/AC:2011) |
663. |
HRN EN 15700:2012 |
Sigurnost traka konvejera za zimski sport ili slobodne aktivnosti (EN 15700:2011) |
EN 15700:2011 |
Safety for conveyor belts for winter sport or leisure use (EN 15700:2011) |
664. |
HRN EN ISO 15744:2008 |
Ručni neelektrični alati – Kod za mjerenje buke – Inženjerska metoda (stupanj 2) (ISO 15744:2002; EN ISO 15744:2008) |
EN ISO 15744:2008 |
Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2) (ISO 15744:2002; EN ISO 15744:2008) |
665. |
HRN EN 15746-2:2012 |
Oprema za željeznice – Željeznički gornji ustroj – Cestovno-željeznički strojevi i pripadajuća oprema – 2. dio: Opći sigurnosni zahtjevi (EN 15746-2:2010+A1:2011) |
EN 15746-2:2010+A1:2011 |
Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements (EN 15746-2:2010+A1:2011) |
666. |
HRN EN 15774:2012 |
Strojevi za preradu hrane – Strojevi za obradu svježe i punjene tjestenine (tagliatelle, cannelloni, ravioli, tortellini, orecchiette i gnocchi) – Sigurnosni i higijenski zahtjevi (EN 15774:2010) |
EN 15774:2010 |
Food processing machinery – Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) – Safety and hygiene requirements (EN 15774:2010) |
667. |
HRN EN 15811:2010 |
Poljoprivredna mehanizacija – Štitnici pokretnih dijelova za prijenos snage – Štitnici koji se otvaraju pomoću alata (ISO/TS 28923:2007, MOD; EN 15811:2009) |
EN 15811:2009 |
Agricultural machinery – Guards for moving parts of power transmission – Guard opening with tool (ISO/TS 28923:2007, MOD; EN 15811:2009) |
668. |
HRN EN 15811:2010/Ispr.1:2011 |
Poljoprivredna mehanizacija – Štitnici pokretnih dijelova za prijenos snage – Štitnici koji se otvaraju pomoću alata (EN 15811:2009/AC:2010) |
EN 15811:2009/AC:2010 |
Agricultural machinery – Guards for moving parts of power transmission – Guard opening with tool (EN 15811:2009/AC:2010) |
669. |
HRN EN 15830:2012 |
Kamioni za teške terene različitoga dometa – Vidljivost – Ispitne metode i potvrđivanje (EN 15830:2012) |
EN 15830:2012 |
Rough-terrain variable reach trucks – Visibility – Test methods and verification (EN 15830:2012) |
670. |
HRN EN 15861:2013 |
Strojevi za preradu hrane – Prostor za dimljenje – Sigurnosni i higijenski zahtjevi (EN 15861:2012) |
EN 15861:2012 |
Food processing machinery – Smokehouses – Safety and hygiene requirements (EN 15861:2012) |
671. |
HRN EN 15895:2013 |
Nabojem pogonjeni ručni alati – Sigurnosni zahtjevi – Alati za pričvršćivanje i označivanje (EN 15895:2011) |
EN 15895:2011 |
Cartridge operated hand-held tools – Safety requirements – Fixing and hard marking tools (EN 15895:2011) |
672. |
HRN EN 15949:2012 |
Sigurnost strojeva – Sigurnosni zahtjevi za valjaonice šipki, konstrukcijskog čelika i valjane žice (EN 15949:2012) |
EN 15949:2012 |
Safety of machinery – Safety requirements for bar mills, structural steel mills and wire rod mills (EN 15949:2012) |
673. |
HRN EN 15954-2:2013 |
Oprema za željeznicu – Željeznički gornji ustroj – Prikolice i pripadajuća oprema – 2. dio: Opći sigurnosni zahtjevi (EN 15954-2:2013) |
EN 15954-2:2013 |
Railway applications – Track – Trailers and associated equipment – Part 2: General safety requirements (EN 15954-2:2013) |
674. |
HRN EN 15955-2:2013 |
Oprema za željeznicu – Željeznički gornji ustroj – Rasklopivi strojevi i pripadajuća oprema – 2. dio: Opći sigurnosni zahtjevi (EN 15955-2:2013) |
EN 15955-2:2013 |
Railway applications – Track – Demountable machines and associated equipment – Part 2: General safety requirements (EN 15955-2:2013) |
675. |
HRN EN 15967:2012 |
Određivanje najvećeg tlaka i najvećeg porasta tlaka eksplozije plinova i para (EN 15967:2011) |
EN 15967:2011 |
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours (EN 15967:2011) |
676. |
HRN EN 15997:2012 |
Vozila za sve terene (ATVs – Quads) – Sigurnosni zahtjevi i metode ispitivanja (EN 15997:2011) |
EN 15997:2011 |
All terrain vehicles (ATVs – Quads) – Safety requirements and test methods (EN 15997:2011) |
677. |
HRN EN 15997:2012/Ispr.1:2013 |
Vozila za sve terene (ATVs – Quads) – Sigurnosni zahtjevi i metode ispitivanja (EN 15997:2011/AC:2012) |
EN 15997:2011/AC:2012 |
All terrain vehicles (ATVs – Quads) – Safety requirements and test methods (EN 15997:2011/AC:2012) |
678. |
HRN EN 16005:2013 |
Strojno pogonjena vrata za pješake – Sigurnost upotrebe – Zahtjevi i metode ispitivanja (EN 16005:2012) |
EN 16005:2012 |
Power operated pedestrian doorsets – Safety in use – Requirements and test methods (EN 16005:2012) |
679. |
HRN EN 16029:2012 |
Jahaća vozila, motorizirana vozila namijenjena prijevozu ljudi izvan javnih cesta – Jednotračna motorna vozila s dvostrukim upravljačem – Sigurnosni zahtjevi i ispitne metode (EN 16029:2012) |
EN 16029:2012 |
Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads – Single-track two-wheel motor vehicles – Safety requirements and test methods (EN 16029:2012) |
680. |
HRN EN ISO 16119-1:2013 |
Poljoprivredna i šumarska mehanizacija – Zahtjevi s obzirom na okoliš za prskalice – 1. dio: Općenito (ISO 16119-1:2013; EN ISO 16119-1:2013) |
EN ISO 16119-1:2013 |
Agricultural and forestry machinery – Environmental requirements for sprayers – Part 1: General (ISO 16119-1:2013; EN ISO 16119-1:2013) |
681. |
HRN EN ISO 16119-2:2013 |
Poljoprivredna i šumarska mehanizacija – Zahtjevi s obzirom na okoliš za prskalice – 2. dio: Horizontalne bučne prskalice (ISO 16119-2:2013; EN ISO 16119-2:2013) |
EN ISO 16119-2:2013 |
Agricultural and forestry machinery – Environmental requirements for sprayers – Part 2: Horizontal boom sprayers (ISO 16119-2:2013; EN ISO 16119-2:2013) |
682. |
HRN EN ISO 16119-3:2013 |
Poljoprivredna i šumarska mehanizacija – Zahtjevi za prskalice s obzirom na okoliš – 3. dio: Prskalice za grmlje i drveće (ISO 16119-3:2013; EN ISO 16119-3:2013) |
EN ISO 16119-3:2013 |
Agricultural and forestry machinery – Environmental requirements for sprayers – Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013; EN ISO 16119-3:2013) |
683. |
HRN EN 16230-1:2013 |
Automobili za zabavu – 1. dio: Posebni sigurnosni zahtjevi i metode ispitivanja za automobile za zabavu (EN 16230-1:2013) |
EN 16230-1:2013 |
Leisure karts – Part 1: Safety requirements and test methods for karts (EN 16230-1:2013) |
684. |
HRN EN ISO 16231-1:2013 |
Samopogonjena poljoprivredna mehanizacaija – Ocjenjivanje stabilnosti – 1. dio: Načela (ISO 16231-1:2013; EN ISO 16231-1:2013) |
EN ISO 16231-1:2013 |
Self-propelled agricultural machinery – Assessment of stability – Part 1: Principles (ISO 16231-1:2013; EN ISO 16231-1:2013) |
685. |
HRN EN 16246:2013 |
Poljoprivredna mehanizacija – Bageri – Sigurnost (EN 16246:2012) |
EN 16246:2012 |
Agricultural machinery – Backhoes – Safety (EN 16246:2012) |
686. |
HRN EN 16252:2013 |
Strojevi za zbijanje otpada ili recikliranih frakcija – Vodoravni tijesci za baliranje – Sigurnosni zahtjevi (EN 16252:2012) |
EN 16252:2012 |
Machines for compacting waste materials or recyclable fractions – Horizontal baling presses – Safety requirements (EN 16252:2012) |
687. |
HRN EN 16307-1:2013 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 1. dio: Dodatni zahtjevi za industrijske kamione s vlastitim pogonom osim kamiona bez vozača, kamiona različitoga dometa i teretnih kamiona (EN 16307-1:2013) |
EN 16307-1:2013 |
Industrial trucks – Safety requirements and verification – Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (EN 16307-1:2013) |
688. |
HRN EN 16307-5:2013 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 5. dio: Dodatni zahtjevi za viličare pogonjene guranjem (EN 16307-5:2013) |
EN 16307-5:2013 |
Industrial trucks – Safety requirements and verification – Part 5: Supplementary requirements for pedestrian-propelled trucks (EN 16307-5:2013) |
689. |
HRN EN 16307-6:2014 |
Industrijski kamioni – Sigurnosni zahtjevi i potvrđivanje – 6. dio: Dodatni zahtjevi za vozila za prijevoz tereta i osoblja (EN 16307-6:2014) |
EN 16307-6:2014 |
Industrial trucks – Safety requirements and verification – Part 6: Supplementary requirements for burden and personnel carriers (EN 16307-6:2014) |
690. |
HRN EN 16327:2014 |
Vatrogastvo – Nadtlačni sustavi pjenila (PPPS) i sustavi komprimirane zračne pjene (CAFS) (EN 16327:2014) |
EN 16327:2014 |
Fire-fighting – Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) (EN 16327:2014) |
691. |
HRN EN ISO 19432:2013 |
Strojevi i oprema za gradnju zgrada – Prijenosni, ručni rezni strojevi pokretani motorima s unutrašnjim izgaranjem – Sigurnosni zahtjevi (ISO 19432:2012; EN ISO 19432:2012) |
EN ISO 19432:2012 |
Building construction machinery and equipment – Portable, hand-held, internal combustion engine driven cut-off machines – Safety requirements (ISO 19432:2012; EN ISO 19432:2012) |
692. |
HRN EN ISO 19932-1:2013 |
Oprema za zaštitu bilja – Leđno nosive prskalice – 1. dio: Zahtjevi za sigurnost i s obzirom na zaštitu okoliša (ISO 19932-1:2013; EN ISO 19932-1:2013) |
EN ISO 19932-1:2013 |
Equipment for crop protection – Knapsack sprayers – Part 1: Safety and environmental requirements (ISO 19932-1:2013; EN ISO 19932-1:2013) |
693. |
HRN EN ISO 19932-2:2013 |
Oprema za zaštitu bilja – Leđno nosive prskalice – 2. dio: Metode ispitivanja (ISO 19932-2:2013; EN ISO 19932-2:2013) |
EN ISO 19932-2:2013 |
Equipment for crop protection – Knapsack sprayers – Part 2: Test methods (ISO 19932-2:2013; EN ISO 19932-2:2013) |
694. |
HRN EN ISO 20361:2009 |
Pumpe i pumpne jedinice za kapljevine – Ispitno pravilo za buku – 2. i 3. razred točnosti (ISO 20361:2007; EN ISO 20361:2009) |
EN ISO 20361:2009 |
Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy (ISO 20361:2007; EN ISO 20361:2009) |
695. |
HRN EN ISO 20361:2009/Ispr.1:2011 |
Pumpe i pumpne jedinice za kapljevine – Ispitno pravilo za buku – 2. i 3. razred točnosti (EN ISO 20361:2009/AC:2010) |
EN ISO 20361:2009/AC:2010 |
Liquid pumps and pump units – Noise test code – Grades 2 and 3 of accuracy (EN ISO 20361:2009/AC:2010) |
696. |
HRN EN ISO 20643:2008 |
Mehaničke vibracije – Rukom pridržavani i ručno vođeni strojevi – Načela ocjenjivanja emisije vibracija (ISO 20643:2005; EN ISO 20643:2008) |
EN ISO 20643:2008 |
Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission (ISO 20643:2005; EN ISO 20643:2008) |
697. |
HRN EN ISO 20643:2008/A1:2012 |
Mehaničke vibracije – Rukom pridržavani i ručno vođeni strojevi – Načela vrednovanja emisije vibracija – Amandman 1: Smještaj akcelerometra (ISO 20643:2005/Amd 1:2012; EN ISO 20643:2008/A1:2012) |
EN ISO 20643:2008/A1:2012 |
Mechanical vibration – Hand-held and hand-guided machinery – Principles for evaluation of vibration emission – Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012; EN ISO 20643:2008/A1:2012) |
698. |
HRN EN ISO 22867:2013 |
Šumarska i vrtna mehanizacija – Ispitno pravilo za vibraciju na prenosivim ručno upravljanim strojevima s motorom s unutrašnjim izgaranjem – Vibracija na ručkama (ISO 22867:2011; EN ISO 22867:2011) |
EN ISO 22867:2011 |
Forestry and gardening machinery – Vibration test code for portable hand-held machines with internal combustion engine – Vibration at the handles (ISO 22867:2011; EN ISO 22867:2011) |
699. |
HRN EN ISO 22868:2012 |
Šumarska mehanizacija – Kod za ispitivanje buke ručnih strojeva s motorima s unutrašnjim izgaranjem – Inženjerska metoda (2. stupanj preciznosti) (ISO 22868:2011; EN ISO 22868:2011) |
EN ISO 22868:2011 |
Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2011; EN ISO 22868:2011) |
700. |
HRN EN ISO 23125:2010 |
Alatni strojevi – Sigurnost – Tokarilice (ISO 23125:2010; EN ISO 23125:2010) |
EN ISO 23125:2010 |
Machine tools – Safety – Turning machines (ISO 23125:2010; EN ISO 23125:2010) |
701. |
HRN EN ISO 23125:2010/A1:2013 |
Alatni strojevi – Sigurnost – Tokarilice – Amandman 1 (ISO 23125:2010/Amd 1:2012; EN ISO 23125:2010/A1:2012) |
EN ISO 23125:2010/A1:2012 |
Machine tools – Safety – Turning machines – Amendment 1 (ISO 23125:2010/Amd 1:2012; EN ISO 23125:2010/A1:2012) |
702. |
HRN EN ISO 28139:2010 |
Poljoprivredna i šumarska mehanizacija – Leđno nosivi zamagljivači pokretani motorima s unutrašnjim izgaranjem – Sigurnosni zahtjevi (ISO 28139:2009; EN ISO 28139:2009) |
EN ISO 28139:2009 |
Agricultural and forestry machinery – Knapsack combustion-engine-driven mistblowers – Safety requirements (ISO 28139:2009; EN ISO 28139:2009) |
703. |
HRN EN ISO 28881:2013 |
Alatni strojevi – Sigurnost – Strojevi za elektroeroziju (ISO 28881:2013; EN ISO 28881:2013) |
EN ISO 28881:2013 |
Machine tools – Safety – Electro-discharge machines (ISO 28881:2013; EN ISO 28881:2013) |
704. |
HRN EN ISO 28881:2013/Ispr.1:2014 |
Alatni strojevi – Sigurnost – Strojevi za elektroeroziju – Tehnički ispravak 1 (ISO 28881:2013/Cor 1:2013; EN ISO 28881:2013/AC:2013) |
EN ISO 28881:2013/AC:2013 |
Machine tools – Safety – Electro-discharge machines – Technical Corrigendum 1 (ISO 28881:2013/Cor 1:2013; EN ISO 28881:2013/AC:2013) |
705. |
HRN EN ISO 28927-1:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 1. dio: Kutne i vertikalne brusilice (ISO 28927-1:2009; EN ISO 28927-1:2009) |
EN ISO 28927-1:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 1: Angle and vertical grinders (ISO 28927-1:2009; EN ISO 28927-1:2009) |
706. |
HRN EN ISO 28927-2:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 2. dio: Ključevi za matice, odvijači matica i izvijači (ISO 28927-2:2009; EN ISO 28927-2:2009) |
EN ISO 28927-2:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009; EN ISO 28927-2:2009) |
707. |
HRN EN ISO 28927-3:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 3. dio: Alati za poliranje i rotacijski, orbitalni i slučajno orbitalni alati za brušenje pijeskom (ISO 28927-3:2009; EN ISO 28927-3:2009) |
EN ISO 28927-3:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009; EN ISO 28927-3:2009) |
708. |
HRN EN ISO 28927-4:2011 |
Ručni prijenosni strojni alati – Metode ispitivanja za vrednovanje emisije vibracije – 4. dio: Ravne brusilice (ISO 28927-4:2010; EN ISO 28927-4:2010) |
EN ISO 28927-4:2010 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010; EN ISO 28927-4:2010) |
709. |
HRN EN ISO 28927-5:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 5. dio: Bušilice i udarne bušilice (ISO 28927-5:2009; EN ISO 28927-5:2009) |
EN ISO 28927-5:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 5: Drills and impact drills (ISO 28927-5:2009; EN ISO 28927-5:2009) |
710. |
HRN EN ISO 28927-6:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 6. dio: Maljevi (ISO 28927-6:2009; EN ISO 28927-6:2009) |
EN ISO 28927-6:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 6: Rammers (ISO 28927-6:2009; EN ISO 28927-6:2009) |
711. |
HRN EN ISO 28927-7:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 7. dio: Sjekači i škare (ISO 28927-7:2009; EN ISO 28927-7:2009) |
EN ISO 28927-7:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 7: Nibblers and shears (ISO 28927-7:2009; EN ISO 28927-7:2009) |
712. |
HRN EN ISO 28927-8:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 8. dio: Pile, strojevi za poliranje i struganje s izmjeničnim djelovanjem i pile s vibracijskim ili rotacijskim djelovanjem (ISO 28927-8:2009; EN ISO 28927-8:2009) |
EN ISO 28927-8:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009; EN ISO 28927-8:2009) |
713. |
HRN EN ISO 28927-9:2010 |
Ručni prijenosni strojni alati – Ispitne metode za procjenu emisije vibracija – 9. dio: Čekići i dlijeta za uklanjanje hrđe (ISO 28927-9:2009; EN ISO 28927-9:2009) |
EN ISO 28927-9:2009 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009; EN ISO 28927-9:2009) |
714. |
HRN EN ISO 28927-10:2011 |
Ručni prijenosni strojni alati – Metode ispitivanja za vrednovanje emisije vibracije – 10. dio: Udarne bušilice, čekići i lomilice (ISO 28927-10:2011; EN ISO 28927-10:2011) |
EN ISO 28927-10:2011 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011; EN ISO 28927-10:2011) |
715. |
HRN EN ISO 28927-11:2011 |
Ručni prijenosni strojni alati – Metode ispitivanja za vrednovanje emisije vibracije – 11. dio: Čekići za kamen (ISO 28927-11:2011; EN ISO 28927-11:2011) |
EN ISO 28927-11:2011 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 11: Stone hammers (ISO 28927-11:2011; EN ISO 28927-11:2011) |
716. |
HRN EN ISO 28927-12:2012 |
Ručni prijenosni strojni alati – Metode ispitivanja za vrednovanje emisije vibracije – 12. dio: Kutne brusilice (ISO 28927-12:2012; EN ISO 28927-12:2012) |
EN ISO 28927-12:2012 |
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 12: Die grinders (ISO 28927-12:2012; EN ISO 28927-12:2012) |
717. |
HRN EN 30326-1:2000 |
Mehaničke vibracije – Laboratorijska metoda ocjenjivanja vibracija na sjedalu vozila – 1. dio: Osnovni zahtjevi (ISO 10326-1:1992; EN 30326-1:1994) |
EN 30326-1:1994 |
Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements (ISO 10326-1:1992; EN 30326-1:1994) |
718. |
HRN EN 30326-1:2000/A1:2008 |
Mehaničke vibracije – Laboratorijska metoda za ocjenjivanje vibracija na sjedalu vozila – 1. dio: Osnovni zahtjevi – Amandman 1 (ISO 10326-1:1992/Amd 1:2007; EN 30326-1:1994/A1:2007) |
EN 30326-1:1994/A1:2007 |
Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements – Amendment 1 (ISO 10326-1:1992/Amd 1:2007; EN 30326-1:1994/A1:2007) |
719. |
HRN EN 30326-1:2000/A2:2012 |
Mehaničke vibracije – Laboratorijska metoda vrednovanja vibracija sjedala vozila – 1. dio: Osnovni zahtjevi – Amandman 2 (ISO 10326-1:1992/Amd 2:2011; EN 30326-1:1994/A2:2011) |
EN 30326-1:1994/A2:2011 |
Mechanical vibration – Laboratory method for evaluating vehicle seat vibration – Part 1: Basic requirements – Amendment 2 (ISO 10326-1:1992/Amd 2:2011; EN 30326-1:1994/A2:2011) |
720. |
HRN EN 50223:2011 |
Stacionarna oprema za elektrostatsko nanošenje zapaljivih vlakanaca – Sigurnosni zahtjevi (EN 50223:2010) |
EN 50223:2010 |
Stationary electrostatic application equipment for ignitable flock material – Safety requirements (EN 50223:2010) |
721. |
HRN EN 50348:2012 |
Stacionarna oprema za elektrostatsko nanošenje nezapaljivih tekućih tvari za premazivanje – Sigurnosni zahtjevi (EN 50348:2010) |
EN 50348:2010 |
Stationary electrostatic application equipment for non-ignitable liquid coating material – Safety requirements (EN 50348:2010) |
722. |
HRN EN 50570:2014 |
Kućanski i slični električni aparati – Sigurnost – Posebni zahtjevi za komercijalne električne bubnjaste sušilice rublja |
EN 50570:2013 |
Household and similar electrical appliances – Safety – Particular requirements for commercial electric tumble dryers (EN 50570:2013) |
723. |
HRN EN 50571:2014 |
Kućanski i slični električni aparati – Sigurnost – Posebni zahtjevi za komercijalne električne perilice rublja |
EN 50571:2013 |
Household and similar electrical appliances – Safety – Particular requirements for commercial electric washing machines (EN 50571:2013) |
724. |
HRN EN 50580:2013 |
Sigurnost ručnih elektromotornih alata – Posebni zahtjevi za pištolje za prskanje (EN 50580:2012) |
EN 50580:2012 |
Safety of hand-held electric motor operated tools – Particular requirements for spray guns (EN 50580:2012) |
725. |
HRN EN 60204-1:2008 |
Sigurnost strojeva – Električna oprema strojeva – 1. dio: Opći zahtjevi (IEC 60204-1:2005, MOD; EN 60204-1:2006) |
EN 60204-1:2006 |
Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, MOD; EN 60204-1:2006) |
726. |
HRN EN 60204-1:2008/A1:2009 |
Sigurnost strojeva – Električna oprema strojeva – 1. dio: Opći zahtjevi (IEC 60204-1:2005/A1:2008; EN 60204-1:2006/A1:2009) |
EN 60204-1:2006/A1:2009 |
Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005/A1:2008; EN 60204-1:2006/A1:2009) |
727. |
HRN EN 60204-1:2008/Ispr.1:2011 |
Sigurnost strojeva – Električna oprema strojeva – 1. dio: Opći zahtjevi (EN 60204-1:2006/AC:2010) |
EN 60204-1:2006/corrigendum Feb. 2010 |
Safety of machinery – Electrical equipment of machines – Part 1: General requirements (EN 60204-1:2006/AC:2010) |
728. |
HRN EN 60204-11:2002 |
Sigurnost strojeva – Električna oprema strojeva – 11. dio: Zahtjevi za visokonaponsku opremu za izmjenične napone iznad 1000 V ili istosmjerne napone iznad 1500 V koji ne prelaze 36 kV (IEC 60204-11:2000; EN 60204-11:2000) |
EN 60204-11:2000 |
Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000; EN 60204-11:2000) |
729. |
HRN EN 60204-11:2002/Ispr.1:2011 |
Sigurnost strojeva – Električna oprema strojeva – 11. dio: Zahtjevi za visokonaponsku opremu za izmjenične napone iznad 1000 V ili istosmjerne napone iznad 1500 V koji ne prelaze 36 kV (EN 60204-11:2000/AC:2010) |
EN 60204-11:2000/AC:2010 |
Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV (EN 60204-11:2000/AC:2010) |
730. |
HRN EN 60204-31:2014 |
Sigurnost strojeva -– Električna oprema strojeva -– 31. dio: Posebna sigurnost i EMC zahtjevi za šivaće strojeve, jedinice i sustave (IEC 60204-31:2013; EN 60204-31:2013) |
EN 60204-31:2013 |
Safety of machinery – Electrical equipment of machines – Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:2013; EN 60204-31:2013) |
731. |
HRN EN 60204-32:2009 |
Sigurnost strojeva – Električna oprema strojeva – 32. dio: Zahtjevi za dizalice (IEC 60204-32:2008; EN 60204-32:2008) |
EN 60204-32:2008 |
Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines (IEC 60204-32:2008; EN 60204-32:2008) |
732. |
HRN EN 60204-33:2012 |
Sigurnost strojeva – Električna oprema strojeva – 33. dio: Zahtjevi za izradu poluvodičke opreme (IEC 60204-33:2009, MOD; EN 60204-33:2011) |
EN 60204-33:2011 |
Safety of machinery – Electrical equipment of machines – Part 33: Requirements for semiconductor fabrication equipment (IEC 60204-33:2009, MOD; EN 60204-33:2011) |
733. |
HRN EN 60335-1:2012 |
Kućanski i slični električni aparati – Sigurnost – 1. dio: Opći zahtjevi (IEC 60335-1:2010, MOD; EN 60335-1:2012) |
EN 60335-1:2012 |
Household and similar electrical appliances – Safety – Part 1: General requirements (IEC 60335-1:2010, MOD; EN 60335-1:2012) |
734. |
HRN EN 60335-2-36:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-36: Posebni zahtjevi ugostiteljskih štednjaka, pećnica, kuhala i grijaćih ploča (IEC 60335-2-36:2002; EN 60335-2-36:2002) |
EN 60335-2-36:2002 |
Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (IEC 60335-2-36:2002; EN 60335-2-36:2002) |
735. |
HRN EN 60335-2-36:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-36: Posebni zahtjevi ugostiteljskih štednjaka, pećnica, kuhala i grijaćih ploča (EN 60335-2-36:2002/A11:2012) |
EN 60335-2-36:2002/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (EN 60335-2-36:2002/A11:2012) |
736. |
HRN EN 60335-2-36:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-36: Posebni zahtjevi ugostiteljskih štednjaka, pećnica, kuhala i grijaćih ploča (EN 60335-2-36:2002/AC:2007) |
EN 60335-2-36:2002/AC:2007 |
Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (EN 60335-2-36:2002/AC:2007) |
737. |
HRN EN 60335-2-37:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-37: Posebni zahtjevi ugostiteljskih električnih friteza (IEC 60335-2-37:2002; EN 60335-2-37:2002) |
EN 60335-2-37:2002 |
Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers (IEC 60335-2-37:2002; EN 60335-2-37:2002) |
738. |
HRN EN 60335-2-37:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-37: Posebni zahtjevi ugostiteljskih električnih friteza (EN 60335-2-37:2002/A11:2012) |
EN 60335-2-37:2002/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers (EN 60335-2-37:2002/A11:2012) |
739. |
HRN EN 60335-2-37:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-37: Posebni zahtjevi ugostiteljskih električnih friteza (EN 60335-2-37:2002/AC:2007) |
EN 60335-2-37:2002/corrigendum Aug. 2007 |
Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers (EN 60335-2-37:2002/AC:2007) |
740. |
HRN EN 60335-2-40:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (IEC 60335-2-40:2002, mod.; EN 60335-2-40:2003) |
EN 60335-2-40:2003 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002, mod.; EN 60335-2-40:2003) |
741. |
HRN EN 60335-2-40:2006/A11:2008 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (EN 60335-2-40:2003/A11:2004) |
EN 60335-2-40:2003/A11:2004 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (EN 60335-2-40:2003/A11:2004) |
742. |
HRN EN 60335-2-40:2006/A1:2008 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (IEC 60335-2-40:2002/am1:2005, MOD; EN 60335-2-40:2003/A1:2006) |
EN 60335-2-40:2003/A1:2006 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002/am1:2005, MOD; EN 60335-2-40:2003/A1:2006) |
743. |
HRN EN 60335-2-40:2006/A12:2008 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (EN 60335-2-40:2003/A12:2005) |
EN 60335-2-40:2003/A12:2005 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (EN 60335-2-40:2003/A12:2005) |
744. |
HRN EN 60335-2-40:2006/A13:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (EN 60335-2-40:2003/A13:2012) |
EN 60335-2-40:2003/A13:2012 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (EN 60335-2-40:2003/A13:2012) |
745. |
HRN EN 60335-2-40:2006/A2:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za električne toplinske crpke, klima aparate i sušila zraka (IEC 60335-2-40:2002/am2:2005, MOD; EN 60335-2-40:2003/A2:2009) |
EN 60335-2-40:2003/A2:2009 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002/am2:2005, MOD; EN 60335-2-40:2003/A2:2009) |
746. |
HRN EN 60335-2-40:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (EN 60335-2-40:2003/AC:2006) |
EN 60335-2-40:2003/corrigendum Apr. 2006 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (EN 60335-2-40:2003/AC:2006) |
747. |
HRN EN 60335-2-40:2006/Ispr.2:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-40: Posebni zahtjevi za dizalice topline, klima-aparate i sušila zraka (EN 60335-2-40:2003/AC:2010) |
EN 60335-2-40:2003/corrigendum Aug. 2010 |
Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (EN 60335-2-40:2003/AC:2010) |
748. |
HRN EN 60335-2-42:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-42: Posebni zahtjevi za ugostiteljske električne pećnice s puhalom, parne tlačne pećnice i konvekcijske parne pećnice (IEC 60335-2-42:2002; EN 60335-2-42:2003) |
EN 60335-2-42:2003 |
Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (IEC 60335-2-42:2002; EN 60335-2-42:2003) |
749. |
HRN EN 60335-2-42:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-42: Posebni zahtjevi za ugostiteljske električne pećnice s puhalom, parne tlačne pećnice i konvekcijske parne pećnice (EN 60335-2-42:2003/A11:2012) |
EN 60335-2-42:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (EN 60335-2-42:2003/A11:2012) |
750. |
HRN EN 60335-2-42:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-42: Posebni zahtjevi za ugostiteljske električne pećnice s puhalom, parne tlačne pećnice i konvekcijske parne pećnice (EN 60335-2-42:2003/AC:2007) |
EN 60335-2-42:2003/corrigendum Sep. 2007 |
Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (EN 60335-2-42:2003/AC:2007) |
751. |
HRN EN 60335-2-47:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-47: Posebni zahtjevi za ugostiteljske električne kotlove (IEC 60335-2-47:2002; EN 60335-2-47:2003) |
EN 60335-2-47:2003 |
Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans (IEC 60335-2-47:2002; EN 60335-2-47:2003) |
752. |
HRN EN 60335-2-47:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-47: Posebni zahtjevi za ugostiteljske električne kotlove (EN 60335-2-47:2003/A11:2012) |
EN 60335-2-47:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans (EN 60335-2-47:2003/A11:2012) |
753. |
HRN EN 60335-2-47:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-47: Posebni zahtjevi za ugostiteljske električne kotlove (EN 60335-2-47:2003/AC:2007) |
EN 60335-2-47:2003/corrigendum Sep. 2007 |
Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans (EN 60335-2-47:2003/AC:2007) |
754. |
HRN EN 60335-2-48:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-48: Posebni zahtjevi za ugostiteljske električne zračeće roštilje i pržila kruha (IEC 60335-2-48:2002; EN 60335-2-48:2003) |
EN 60335-2-48:2003 |
Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters (IEC 60335-2-48:2002; EN 60335-2-48:2003) |
755. |
HRN EN 60335-2-48:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-48: Posebni zahtjevi za ugostiteljske električne zračeće roštilje i pržila kruha (EN 60335-2-48:2003/A11:2012) |
EN 60335-2-48:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters (EN 60335-2-48:2003/A11:2012) |
756. |
HRN EN 60335-2-48:2006/Ispr.1:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-48: Posebni zahtjevi za ugostiteljske električne zračeće roštilje i pržila kruha (EN 60335-2-48:2003/AC:2007) |
EN 60335-2-48:2003/corrigendum Sep. 2007 |
Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters (EN 60335-2-48:2003/AC:2007) |
757. |
HRN EN 60335-2-49:2006 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-49: Posebni zahtjevi za ugostiteljske električne tople ormariće (IEC 60335-2-49:2002; EN 60335-2-49:2003) |
EN 60335-2-49:2003 |
Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric hot cupboards (IEC 60335-2-49:2002; EN 60335-2-49:2003) |
758. |
HRN EN 60335-2-49:2006/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-49: Posebni zahtjevi za ugostiteljske električne aparate za pohranu hrane i topli lonci (EN 60335-2-49:2003/A11:2012) |
EN 60335-2-49:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm (EN 60335-2-49:2003/A11:2012) |
759. |
HRN EN 60335-2-49:2006/Ispr.1:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-49: Posebni zahtjevi za ugostiteljske električne aparate za pohranu hrane i topli lonci (EN 60335-2-49:2003/AC:2007) |
EN 60335-2-49:2003/AC:2007 |
Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm (EN 60335-2-49:2003/AC:2007) |
760. |
HRN EN 60335-2-65:2008 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-65: Posebni zahtjevi aparata za pročišćavanje zraka (IEC 60335-2-65:2002+am1:2008; EN 60335-2-65:2003+A1:2008) |
EN 60335-2-65:2003 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances (IEC 60335-2-65:2002+am1:2008; EN 60335-2-65:2003+A1:2008) |
761. |
HRN EN 60335-2-65:2008/A11:2013 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-65: Posebni zahtjevi aparata za pročišćavanje zraka (EN 60335-2-65:2003/A11:2012) |
EN 60335-2-65:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances (EN 60335-2-65:2003/A11:2012) |
762. |
HRN EN 60335-2-67:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-67: Posebni zahtjevi za strojeve za obradu i čišćenje podova za industrijsku i komercijalnu uporabu (IEC 60335-2-67:2002, MOD+am1:2005, MOD; EN 60335-2-67:2009) |
EN 60335-2-67:2009 |
Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment and floor cleaning machines for industrial and commercial use (IEC 60335-2-67:2002, MOD+am1:2005, MOD; EN 60335-2-67:2009) |
763. |
HRN EN 60335-2-67:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-67: Posebni zahtjevi za strojeve za obradu podova za komercijalnu uporabu (IEC 60335-2-67:2012, MOD; EN 60335-2-67:2012) |
EN 60335-2-67:2012 |
Household and similar electrical appliances – Safety – Part 2-67: Particular requirements for floor treatment machines for commercial use (IEC 60335-2-67:2012, MOD; EN 60335-2-67:2012) |
764. |
HRN EN 60335-2-68:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-68: Posebni zahtjevi za industrijske i komercijalne čistilice rošenjem (IEC 60335-2-68:2002, MOD+am1:2005, MOD+am2:2007, MOD; EN 60335-2-68:2009) |
EN 60335-2-68:2009 |
Household and similar electrical appliances – Safety – Part 2-68: Particular requirements for spray extraction machines for industrial and commercial use (IEC 60335-2-68:2002, MOD+am1:2005, MOD+am2:2007, MOD; EN 60335-2-68:2009) |
765. |
HRN EN 60335-2-68:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-68: Posebni zahtjevi za komercijalne čistilice rošenjem (IEC 60335-2-68:2012, MOD; EN 60335-2-68:2012) |
EN 60335-2-68:2012 |
Household and similar electrical appliances – Safety – Part 2-68: Particular requirements for spray extraction machines for commercial use (IEC 60335-2-68:2012, MOD; EN 60335-2-68:2012) |
766. |
HRN EN 60335-2-69:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-69: Posebni zahtjevi za usisavače prašine i vode s rotirajućom četkom, za industrijsku i komercijalnu uporabu (IEC 60335-2-69:2002, MOD+am1:2004, MOD+am2:2007, MOD; EN 60335-2-69:2009) |
EN 60335-2-69:2009 |
Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use (IEC 60335-2-69:2002, MOD+am1:2004, MOD+am2:2007, MOD; EN 60335-2-69:2009) |
767. |
HRN EN 60335-2-69:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-69: Posebni zahtjevi za usisavače prašine i vode s rotirajućom četkom za komercijalnu uporabu (IEC 60335-2-69:2012, MOD; EN 60335-2-69:2012) |
EN 60335-2-69:2012 |
Household and similar electrical appliances – Safety – Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use (IEC 60335-2-69:2012, MOD; EN 60335-2-69:2012) |
768. |
HRN EN 60335-2-72:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-72: Posebni zahtjevi za automatske strojeve za obradu poda za komercijalnu i industrijsku uporabu (IEC 60335-2-72:2002, MOD+am1:2005, MOD; EN 60335-2-72:2009) |
EN 60335-2-72:2009 |
Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use (IEC 60335-2-72:2002, MOD+am1:2005, MOD; EN 60335-2-72:2009) |
769. |
HRN EN 60335-2-72:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-72: Posebni zahtjevi za strojeve za obradu poda sa ili bez vlastitog pogona za komercijalnu uporabu (IEC 60335-2-72:2012, MOD; EN 60335-2-72:2012) |
EN 60335-2-72:2012 |
Household and similar electrical appliances – Safety – Part 2-72: Particular requirements for floor treatment machines with or without traction drive for commercial use (IEC 60335-2-72:2012, MOD; EN 60335-2-72:2012) |
770. |
HRN EN 60335-2-77:2013 |
Sigurnost kućanskih i sličnih aparata – Dio 2-77: Posebni zahtjevi za ručno upravljane gurane električne kosilice (IEC 60335-2-77:2002, MOD; EN 60335-2-77:2010) |
EN 60335-2-77:2010 |
Safety of household and similar appliances – Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers (IEC 60335-2-77:2002, MOD; EN 60335-2-77:2010) |
771. |
HRN EN 60335-2-79:2011 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-79: Posebni zahtjevi za visokotlačne i parne čistilice (IEC 60335-2-79:2002, MOD+am1:2004, MOD+am2:2007, MOD; EN 60335-2-79:2009) |
EN 60335-2-79:2009 |
Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners (IEC 60335-2-79:2002, MOD+am1:2004, MOD+am2:2007, MOD; EN 60335-2-79:2009) |
772. |
HRN EN 60335-2-79:2012 |
Kućanski i slični električni aparati – Sigurnost – Dio 2-79: Posebni zahtjevi za visokotlačne i parne čistilice (IEC 60335-2-79:2012, MOD; EN 60335-2-79:2012) |
EN 60335-2-79:2012 |
Household and similar electrical appliances – Safety – Part 2-79: Particular requirements for high pressure cleaners and steam cleaners (IEC 60335-2-79:2012, MOD; EN 60335-2-79:2012) |
773. |
HRN EN 60745-1:2013 |
Ručni elektromotorni alati – Sigurnost – 1. dio: Opći zahtjevi (IEC 60745-1:2006, MOD; EN 60745-1:2009+AC:2009+A11:2010) |
EN 60745-1:2009 |
Hand-held motor-operated electric tools – Safety – Part 1: General requirements (IEC 60745-1:2006, MOD; EN 60745-1:2009+AC:2009+A11:2010) |
774. |
HRN EN 60745-2-11:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-11: Posebni zahtjevi za pile s kretnjom amo-tamo (ubodne i sabljaste) (IEC 60745-2-11:2003, MOD+am1:2008; EN 60745-2-11:2010) |
EN 60745-2-11:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) (IEC 60745-2-11:2003, MOD+am1:2008; EN 60745-2-11:2010) |
775. |
HRN EN 60745-2-1:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-1: Posebni zahtjevi za bušilice i udarne bušilice (IEC 60745-2-1:2003, MOD+am1:2008; EN 60745-2-1:2010) |
EN 60745-2-1:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003, MOD+am1:2008; EN 60745-2-1:2010) |
776. |
HRN EN 60745-2-12:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-12: Posebni zahtjevi vibratora za beton (IEC 60745-2-12:2003, MOD+am1:2008; EN 60745-2-12:2009) |
EN 60745-2-12:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-12: Particular requirements for concrete vibrators (IEC 60745-2-12:2003, MOD+am1:2008; EN 60745-2-12:2009) |
777. |
HRN EN 60745-2-13:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-13: Posebni zahtjevi za lančane pile (IEC 60745-2-13:2006, MOD; EN 60745-2-13:2009) |
EN 60745-2-13:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006, MOD; EN 60745-2-13:2009) |
778. |
HRN EN 60745-2-13:2012/A1:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-13: Posebni zahtjevi za lančane pile (IEC 60745-2-13:2006/am1:2009; EN 60745-2-13:2009/A1:2010) |
EN 60745-2-13:2009/A1:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006/am1:2009; EN 60745-2-13:2009/A1:2010) |
779. |
HRN EN 60745-2-14:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-14: Posebni zahtjevi za blanjalice (IEC 60745-2-14:2003, MOD+am1:2006, MOD; EN 60745-2-14:2009) |
EN 60745-2-14:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003, MOD+am1:2006, MOD; EN 60745-2-14:2009) |
780. |
HRN EN 60745-2-14:2012/A2:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-14: Posebni zahtjevi za blanjalice (IEC 60745-2-14:2003/am2:2010; EN 60745-2-14:2009/A2:2010) |
EN 60745-2-14:2009/A2:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003/am2:2010; EN 60745-2-14:2009/A2:2010) |
781. |
HRN EN 60745-2-15:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-15: Posebni zahtjevi za kresalice (IEC 60745-2-15:2006, MOD; EN 60745-2-15:2009) |
EN 60745-2-15:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, MOD; EN 60745-2-15:2009) |
782. |
HRN EN 60745-2-16:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-16: Posebni zahtjevi za spajalice (IEC 60745-2-16:2008, MOD; EN 60745-2-16:2010) |
EN 60745-2-16:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-16: Particular requirements for tackers (IEC 60745-2-16:2008, MOD; EN 60745-2-16:2010) |
783. |
HRN EN 60745-2-17:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-17: Posebni zahtjevi za utorne i ravninske glodalice (IEC 60745-2-17:2010, MOD; EN 60745-2-17:2010) |
EN 60745-2-17:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010, MOD; EN 60745-2-17:2010) |
784. |
HRN EN 60745-2-18:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-18: Posebni zahtjevi za omotavalice (IEC 60745-2-18:2003, MOD+am1:2008; EN 60745-2-18:2009) |
EN 60745-2-18:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, MOD+am1:2008; EN 60745-2-18:2009) |
785. |
HRN EN 60745-2-19:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-19: Posebni zahtjevi za čeone glodalice (IEC 60745-2-19:2005, MOD; EN 60745-2-19:2009) |
EN 60745-2-19:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers (IEC 60745-2-19:2005, MOD; EN 60745-2-19:2009) |
786. |
HRN EN 60745-2-19:2012/A1:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-19: Posebni zahtjevi za čeone glodalice (IEC 60745-2-19:2005/am1:2010; EN 60745-2-19:2009/A1:2010) |
EN 60745-2-19:2009/A1:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers (IEC 60745-2-19:2005/am1:2010; EN 60745-2-19:2009/A1:2010) |
787. |
HRN EN 60745-2-20:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-20: Posebni zahtjevi za tračne pile (IEC 60745-2-20:2003, MOD+am1:2008; EN 60745-2-20:2009) |
EN 60745-2-20:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-20: Particular requirements for band saws (IEC 60745-2-20:2003, MOD+am1:2008; EN 60745-2-20:2009) |
788. |
HRN EN 60745-2-21:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-21: Posebni zahtjevi za čistilice vodnih ispusta (IEC 60745-2-21:2002, MOD; EN 60745-2-21:2009) |
EN 60745-2-21:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, MOD; EN 60745-2-21:2009) |
789. |
HRN EN 60745-2-21:2012/A1:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-21: Posebni zahtjevi za čistilice vodnih ispusta (IEC 60745-2-21:2002/am1:2008; EN 60745-2-21:2009/A1:2010) |
EN 60745-2-21:2009/A1:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002/am1:2008; EN 60745-2-21:2009/A1:2010) |
790. |
HRN EN 60745-2-2:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-2: Posebni zahtjevi za izvijače i udarne izvijače (IEC 60745-2-2:2003, MOD+am1:2008; EN 60745-2-2:2010) |
EN 60745-2-2:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, MOD+am1:2008; EN 60745-2-2:2010) |
791. |
HRN EN 60745-2-22:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-22: Posebni zahtjevi za rezne alate (IEC 60745-2-22:2011, MOD; EN 60745-2-22:2011) |
EN 60745-2-22:2011 |
Hand-held motor-operated electric tools – Safety – Part 2-22: Particular requirements for cut-off machines (IEC 60745-2-22:2011, MOD; EN 60745-2-22:2011) |
792. |
HRN EN 60745-2-22:2012/A11:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-22: Posebni zahtjevi za rezne alate (EN 60745-2-22:2011/A11:2013) |
EN 60745-2-22:2011/A11:2013 |
Hand-held motor-operated electric tools – Safety – Part 2-22: Particular requirements for cut-off machines (EN 60745-2-22:2011/A11:2013) |
793. |
HRN EN 60745-2-23:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-23: Posebni zahtjevi za brusilice i male rotacijske alate (IEC 60745-2-23:2012, MOD; EN 60745-2-23:2013) |
EN 60745-2-23:2013 |
Hand-held motor-operated electric tools – Safety – Part 2-23: Particular requirements for die grinders and small rotary tools (IEC 60745-2-23:2012, MOD; EN 60745-2-23:2013) |
794. |
HRN EN 60745-2-3:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-3: Posebni zahtjevi za brusilice, laštilice i kolutne pjeskarilice (IEC 60745-2-3:2006, MOD+am1:2010, MOD+am1:2010/Corr.:2011; EN 60745-2-3:2011) |
EN 60745-2-3:2011 |
Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, MOD+am1:2010, MOD+am1:2010/Corr.:2011; EN 60745-2-3:2011) |
795. |
HRN EN 60745-2-3:2012/A2:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-3: Posebni zahtjevi za brusilice, laštilice i kolutne pjeskarilice (IEC 60745-2-3:2006/am2:2012, MOD; EN 60745-2-3:2011/A2:2013) |
EN 60745-2-3:2011/A2:2013 |
Hand-held motor-operated electric tools – Safety – Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006/am2:2012, MOD; EN 60745-2-3:2011/A2:2013) |
796. |
HRN EN 60745-2-4:2011 |
Ručni elektromotorni alati – Sigurnost – Dio 2-4: Posebni zahtjevi za pjeskarilice i laštilice (IEC 60745-2-4:2002, MOD+am1:2008, MOD; EN 60745-2-4:2009) |
EN 60745-2-4:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, MOD+am1:2008, MOD; EN 60745-2-4:2009) |
797. |
HRN EN 60745-2-4:2011/A11:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-4: Posebni zahtjevi za pjeskarilice i laštilice (EN 60745-2-4:2009/A11:2011) |
EN 60745-2-4:2009/A11:2011 |
Hand-held motor-operated electric tools – Safety – Part 2-4: Particular requirements for sanders and polishers other than disk type (EN 60745-2-4:2009/A11:2011) |
798. |
HRN EN 60745-2-5:2013 |
Ručni elektromotorni alati – Sigurnost – Dio 2-5: Posebni zahtjevi za kružne pile (IEC 60745-2-5:2010, MOD; EN 60745-2-5:2010) |
EN 60745-2-5:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws (IEC 60745-2-5:2010, MOD; EN 60745-2-5:2010) |
799. |
HRN EN 60745-2-6:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-6: Posebni zahtjevi za čekiće (IEC 60745-2-6:2003, MOD+am1:2006+am2:2008; EN 60745-2-6:2010) |
EN 60745-2-6:2010 |
Hand-held motor-operated electric tools – Safety – Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, MOD+am1:2006+am2:2008; EN 60745-2-6:2010) |
800. |
HRN EN 60745-2-8:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-8: Posebni zahtjevi za škare i grickala (IEC 60745-2-8:2003, MOD+am1:2008; EN 60745-2-8:2009) |
EN 60745-2-8:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-8: Particular requirements for shears and nibblers (IEC 60745-2-8:2003, MOD+am1:2008; EN 60745-2-8:2009) |
801. |
HRN EN 60745-2-9:2012 |
Ručni elektromotorni alati – Sigurnost – Dio 2-9: Posebni zahtjevi za navojne nareznice (IEC 60745-2-9:2003, MOD+am1:2008; EN 60745-2-9:2009) |
EN 60745-2-9:2009 |
Hand-held motor-operated electric tools – Safety – Part 2-9: Particular requirements for tappers (IEC 60745-2-9:2003, MOD+am1:2008; EN 60745-2-9:2009) |
802. |
HRN EN 60947-5-3:2014 |
Niskonaponska sklopna aparatura -– Dio 5-3: Aparati za upravljačke strujne krugove i sklopni elementi -– Zahtjevi za blizinske aparate s određenim ponašanjem u uvjetima kvara (IEC 60947-5-3:2013; EN 60947-5-3:2013) |
EN 60947-5-3:2012 |
Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDDB) (IEC 60947-5-3:2013; EN 60947-5-3:2013) |
803. |
HRN EN 60947-5-5:2005 |
Niskonaponska sklopna aparatura – Dio 5-5: Aparati za upravljačke strujne krugove i sklopni elementi – Električni aparati za zaustavljanje u nevolji sa zaporom (IEC 60947-5-5:1997; EN 60947-5-5:1997) |
EN 60947-5-5:1997 |
Low voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997; EN 60947-5-5:1997) |
804. |
HRN EN 60947-5-5:2005/A11:2013 |
Niskonaponska sklopna aparatura – Dio 5-5: Aparati za upravljačke strujne krugove i sklopni elementi – Električni aparati za zaustavljanje u nevolji sa zaporom (EN 60947-5-5:1997/A11:2013) |
EN 60947-5-5:1997/A11:2013 |
Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function (EN 60947-5-5:1997/A11:2013) |
805. |
HRN EN 60947-5-5:2005/A1:2008 |
Niskonaponska sklopna aparatura – Dio 5-5: Aparati za upravljačke strujne krugove i sklopni elementi – Električni aparati za zaustavljanje u nevolji s zaporom (IEC 60947-5-5:1997/am1:2005; EN 60947-5-5:1997/A1:2005) |
EN 60947-5-5:1997/A1:2005 |
Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997/am1:2005; EN 60947-5-5:1997/A1:2005) |
806. |
HRN EN 61029-1:2012 |
Sigurnost prijevoznih elektromotornih alata – 1. dio: Opći zahtjevi (IEC 61029-1:1990, MOD; EN 61029-1:2009) |
EN 61029-1:2009 |
Safety of transportable motor-operated electric tools – Part 1: General requirements (IEC 61029-1:1990, MOD; EN 61029-1:2009) |
807. |
HRN EN 61029-1:2012/A11:2013 |
Sigurnost prijevoznih elektromotornih alata – 1. dio: Opći zahtjevi (EN 61029-1:2009/A11:2010) |
EN 61029-1:2009/A11:2010 |
Safety of transportable motor-operated electric tools – Part 1: General requirements (EN 61029-1:2009/A11:2010) |
808. |
HRN EN 61029-1:2012/Ispr.1:2013 |
Sigurnost prijevoznih elektromotornih alata – 1. dio: Opći zahtjevi (EN 61029-1:2009/AC:2009) |
EN 61029-1:2009/AC:2009 |
Safety of transportable motor-operated electric tools – Part 1: General requirements (EN 61029-1:2009/AC:2009) |
809. |
HRN EN 61029-2-10:2012 |
Sigurnost prijenosnih elektromotornih alata – Dio 2-10: Posebni zahtjevi za odrezne brusilice (IEC 61029-2-10:1998, MOD; EN 61029-2-10:2010) |
EN 61029-2-10:2010 |
Safety of transportable motor-operated electric tools – Part 2-10: Particular requirements for cutting-off grinders (IEC 61029-2-10:1998, MOD; EN 61029-2-10:2010) |
810. |
HRN EN 61029-2-11:2012 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-11: Posebni zahtjevi za složene stolne kutne pile (IEC 61029-2-11:2001, MOD; EN 61029-2-11:2009) |
EN 61029-2-11:2009 |
Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, MOD; EN 61029-2-11:2009) |
811. |
HRN EN 61029-2-11:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-11: Posebni zahtjevi za složene stolne kutne pile (IEC 61029-2-11:2001, MOD; EN 61029-2-11:2012) |
EN 61029-2-11:2012 |
Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, MOD; EN 61029-2-11:2012) |
812. |
HRN EN 61029-2-11:2013/A11:2014 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-11: Posebni zahtjevi za složene stolne kutne pile (EN 61029-2-11:2012/A11:2013) |
EN 61029-2-11:2012/A11:2013 |
Safety of transportable motor-operated electric tools – Part 2-11: Particular requirements for combined mitre and bench saws (EN 61029-2-11:2012/A11:2013) |
813. |
HRN EN 61029-2-1:2012 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-1: Posebni zahtjevi za stolne kružne pile (IEC 61029-2-1:1993, MOD+am1:1999+am2:2001; EN 61029-2-1:2010) |
EN 61029-2-1:2010 |
Safety of transportable motor-operated electric tools – Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993, MOD+am1:1999+am2:2001; EN 61029-2-1:2010) |
814. |
HRN EN 61029-2-1:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-1: Posebni zahtjevi za stolne kružne pile (IEC 61029-2-1:1993, MOD+am1:1999+am2:2001; EN 61029-2-1:2012) |
EN 61029-2-1:2012 |
Safety of transportable motor-operated electric tools – Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993, MOD+am1:1999+am2:2001; EN 61029-2-1:2012) |
815. |
HRN EN 61029-2-12:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-12: Posebni zahtjevi za strojeve za rezanje navoja (IEC 61029-2-12:2010, MOD; EN 61029-2-12:2011) |
EN 61029-2-12:2011 |
Safety of transportable motor-operated electric tools – Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010, MOD; EN 61029-2-12:2011) |
816. |
HRN EN 61029-2-3:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-3: Posebni zahtjevi za strojeve za izravnavanje i blanjanje (IEC 61029-2-3:1993, MOD+am1:2001; EN 61029-2-3:2011) |
EN 61029-2-3:2011 |
Safety of transportable motor-operated electric tools – Part 2-3: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, MOD+am1:2001; EN 61029-2-3:2011) |
817. |
HRN EN 61029-2-4:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-4: Posebni zahtjevi za stolne brusilice (IEC 61029-2-4:1993, MOD+am1:2001, MOD; EN 61029-2-4:2011) |
EN 61029-2-4:2011 |
Safety of transportable motor-operated electric tools – Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, MOD+am1:2001, MOD; EN 61029-2-4:2011) |
818. |
HRN EN 61029-2-6:2012 |
Sigurnost prijenosnih elektromotornih alata – Dio 2-6: Posebni zahtjevi za dijamantne bušilice s dovodom vode (IEC 61029-2-6:1993, MOD; EN 61029-2-6:2010) |
EN 61029-2-6:2010 |
Safety of transportable motor-operated electric tools – Part 2-6: Particular requirements for diamond drills with water supply (IEC 61029-2-6:1993, MOD; EN 61029-2-6:2010) |
819. |
HRN EN 61029-2-8:2012 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-8: Posebni zahtjevi za jednovretenaste okomite stolne glodalice (IEC 61029-2-8:1995, MOD+am1:1999+am2:2001; EN 61029-2-8:2010) |
EN 61029-2-8:2010 |
Safety of transportable motor-operated electric tools – Part 2-8: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995, MOD+am1:1999+am2:2001; EN 61029-2-8:2010) |
820. |
HRN EN 61029-2-9:2012 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-9: Posebni zahtjevi za kutne pile (IEC 61029-2-9:1995, MOD; EN 61029-2-9:2009) |
EN 61029-2-9:2009 |
Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, MOD; EN 61029-2-9:2009) |
821. |
HRN EN 61029-2-9:2012/A11:2014 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-9: Posebni zahtjevi za kutne pile (EN 61029-2-9:2012/A11:2013) |
EN 61029-2-9:2012/A11:2013 |
Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws (EN 61029-2-9:2012/A11:2013) |
822. |
HRN EN 61029-2-9:2013 |
Sigurnost prijevoznih elektromotornih alata – Dio 2-9: Posebni zahtjevi za kutne pile (IEC 61029-2-9:1995, MOD; EN 61029-2-9:2012) |
EN 61029-2-9:2012 |
Safety of transportable motor-operated electric tools – Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, MOD; EN 61029-2-9:2012) |
823. |
HRN EN 61310-1:2008 |
Sigurnost strojeva – Označivanje, obilježavanje i djelovanje – 1. dio: Zahtjevi za vidne, zvučne i opipne signale (IEC 61310-1:2007; EN 61310-1:2008) |
EN 61310-1:2008 |
Safety of machinery – Indication, marking and actuation – Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007; EN 61310-1:2008) |
824. |
HRN EN 61310-2:2008 |
Sigurnost strojeva – Označivanje, obilježavanje i djelovanje – 2. dio: Zahtjevi za obilježavanje (IEC 61310-2:2007; EN 61310-2:2008) |
EN 61310-2:2008 |
Safety of machinery – Indication, marking and actuation – Part 2: Requirements for marking (IEC 61310-2:2007; EN 61310-2:2008) |
825. |
HRN EN 61310-3:2008 |
Sigurnost strojeva – Označivanje, obilježavanje i djelovanje – 3. dio: Zahtjevi za položaj i rad aktuatora (IEC 61310-3:2007; EN 61310-3:2008) |
EN 61310-3:2008 |
Safety of machinery – Indication, marking and actuation – Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007; EN 61310-3:2008) |
826. |
HRN EN 61496-1:2014 |
Sigurnost strojeva – Elektroosjetilna zaštitna oprema – 1. dio: Opći zahtjevi i ispitivanja IEC 61496-1:2012, EN 61496-1:2013) |
EN 61496-1:2013 |
Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and tests (IEC 61496-1:2012; EN 61496-1:2013) |
827. |
HRN EN 61800-5-2:2008 |
Elektromotorni sustavi prilagodljive brzine – Dio 5-2: Zahtjevi za sigurnost – Funkcionalni (IEC 61800-5-2:2007; EN 61800-5-2:2007) |
EN 61800-5-2:2007 |
Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional (IEC 61800-5-2:2007; EN 61800-5-2:2007) |
828. |
HRN EN 62061:2008 |
Sigurnost strojeva – Funkcionalna sigurnost za električne, elektroničke i programibilne upravljačke sustave (IEC 62061:2005; EN 62061:2005) |
EN 62061:2005 |
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005; EN 62061:2005) |
829. |
HRN EN 62061:2008/A1:2013 |
Sigurnost strojeva – Funkcionalna sigurnost za električne, elektroničke i programibilne upravljačke sustave (IEC 62061:2005/am1:2012; EN 62061:2005/A1:2013) |
EN 62061:2005/A1:2013 |
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005/am1:2012; EN 62061:2005/A1:2013) |
830. |
HRN EN 62061:2008/Ispr.1:2011 |
Sigurnost strojeva – Funkcionalna sigurnost za električne, elektroničke i programibilne upravljačke sustave (EN 62061:2005/AC:2010) |
EN 62061:2005/corrigendum Feb. 2010 |
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems (EN 62061:2005/AC:2010) |
Objavom ovoga Popisa stavlja se izvan snage Popis hrvatskih norma u području sigurnosti strojeva 2009-04-30 (»Narodne novine«, broj 141/09).
Klasa: 383-01/14-01/11
Urbroj: 526-03-01-01-9-14-4
Zagreb, 6. listopada 2014.
Ministar
Ivan Vrdoljak, v. r.